Re: Connecting to opencores 1G UDP/IP Stack

[Paul Bar]

I would use a fifo.

Paul

On Thursday, November 20, 2014 9:16:54 PM UTC-5, Chris Stathis wrote:

I intend to use this core with the opencores 1G UDP/IP stack here:

http://opencores.org/project,udp_ip_stack

The input and output data buffers on this module are 8 bits wide... and the corresponding buffers on the MAC core are 32 bits wide. Can someone suggest a good strategy for gluing these together? If someone has a code example of connecting these two components, I would be grateful.

[Jonathan Gao]

Try to leverage the asynmatric asynchronous fifo. For example, write in as 32bit data width with 25MHz clock and read out as 8 bit data width with 100MHz.

--
You received this message because you are subscribed to the Google Groups "opencores-tri-mode eth MAC" group.
To unsubscribe from this group and stop receiving emails from it, send an email to opencores-tri-mode-...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.