Help

[Kris Burke]

Can someone please help me out. I have the Intel Edison connected to the mini breakout board. I connect both ports to my computer after installing all of the Edison Drivers. I get this error after running the flashall.bat:

Device has DFU interface, but has no DFU functional descriptor
Cannot open DFU device 8087:0a99
Device has DFU interface, but has no DFU functional descriptor
Cannot open DFU device 8087:0a99
Device has DFU interface, but has no DFU functional descriptor
Cannot open DFU device 8087:0a99
Dfu device not found Timeout
Did you plug and reboot your board?
If yes, please try a recovery by calling this script with the --recovery option

I did notice in my device manager that RNDIS does not have any drivers installed and have been unable to find any that work.

If anyone can help, I would greatly appreciate it. Also if anyone has a rig that they would like to sell, I would be interested in buying. Thanks again!

[Robin Kirkman]

It sounds like the edison was previously flashed and repartitioned, such as by a prior Jubilinux install.  'Repartition' at https://www.jubilinux.org/u-boot-commands/ has a command you can type onto the edison's serial console during the early U-Boot phase that will fix this and make flashing work again.

--
You received this message because you are subscribed to the Google Groups "OpenAPS Dev" group.
To unsubscribe from this group and stop receiving emails from it, send an email to openaps-dev...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/openaps-dev/621c63bf-acf6-431d-985b-2f68407053d9n%40googlegroups.com.