Hi Don
Are you sure you sent the correct log files?
I saw about 20 runs <1 minute and 2 runs of about 5 minutes
Of the two runs, the final one had dec guiding disabled and shot off the chart, so predictably high Dec RMS.
The RA RMS was a modest .637" total RMS: (dec in red)
The other 5 minute segment had Dec guiding enabled, but it shows signficant backlash and could have used backlash compensation. RA RMS was nearly 2".
Doing a guiding assistant run after your calibration will help with recommendations

One suggestion that will help RA is to use the PPEC algorithm with a period of 501, and disable auto adjust: (note on period: the period measurement varied quite a bit between segments, so look up your mount's primary period value and use that. this value is an estimate)