What I've done is: -
1) Installed ZWO ASI Camera driver Setup V2.0.1.3 - apparently successfully; PHD2 allows connection to be established but any attempts to get it to Loop or to do Darks results in a timeout.
2) Tried increasing timeout to 30 s - no success. Can't see point in increasing it further.
3) Tried the 120MM-S camera with USB2.0 cable direct from computer's USB2.0 and 3.0 ports without success.
4)
Still with direct USB cable to the PC I tried using camera with
SharpCap 2.9. After a couple of abortive attempts I tried my ASI 174MM -
which connected OK - and then the ASI 120MM-S connected OK repeatedly.
But it still won't work with PHD2.
5) Tried the ASI 174MM with PHD2 - works OK.
I'm stumped. Any ideas?
The 174MM is needed for other tasks so I'd like to revert back to the 120MM-S for guiding.
Hoping someone can enlighten me.
Regards,
I recommend you upgrade to the latest PHD 2.6.3 for starters.
Thanks
Brian
Brian Valente
Brianvalentephotography.com
--
You received this message because you are subscribed to the Google Groups "Open PHD Guiding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to open-phd-guidi...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Thanks
Brian
Brian Valente
Brianvalentephotography.com
From: open-phd...@googlegroups.com [mailto:open-phd...@googlegroups.com] On Behalf Of Andy Galasso
Sent: Thursday, May 25, 2017 1:40 PM
To: Open PHD Guiding <open-phd...@googlegroups.com>
--