Guide pulses just stop with no error in PHD2

[Franklin Marek]

Hi,

link to debug log: https://openphdguiding.org/logs/dl/PHD2_logs_gKRg.zip

Equipment: NEQ6pro mount via Green Swamp Server, guide camera asi290mm-mini

The issue is, everything will be running just fine, and in the middle of a guiding run, the guide pulses just stop with no error in the main PHD2 screen.  Even though corrections are needed no pulses are sent and I can see the RA drift just like guiding is shut off.

In the debug I caught exactly where this is happening

19:58:01.442 00.000 15396 Still moving after 1s - aborting
19:58:01.442 00.000 15396 Error thrown from C:\cygwin\home\Andy\projects\phd2-build-20251209-235857\src\scope_ascom.cpp:560->ASCOM Scope: scope is still moving after 1 second
19:58:01.442 00.000 15396 GetBoolean("/Confirm/5/PulseGuideFailedAlertEnabled", 1) returns 0
19:58:01.442 00.000 15396 Suppressed alert:  PulseGuide command to mount has failed - guiding is likely to be ineffective.
19:58:01.442 00.000 15396 Error thrown from C:\cygwin\home\Andy\projects\phd2-build-20251209-235857\src\scope.cpp:795->guide failed
19:58:01.442 00.000 15396 Move returns status 1, amount 0
19:58:01.442 00.000 15396 Error thrown from C:\cygwin\home\Andy\projects\phd2-build-20251209-235857\src\worker_thread.cpp:328->Move failed
19:58:01.442 00.000 15396 move complete, result=1
19:58:01.442 00.000 15396 worker thread done servicing request
19:58:01.442 00.000 15396 Worker thread wakes up
19:58:01.442 00.000 13696 GuideStep: 2.1 px 0 ms WEST, -4.4 px 0 ms NORTH
19:58:01.442 00.000 15396 worker thread servicing REQUEST_EXPOSE 2000
19:58:01.442 00.000 15396 Handling exposure in thread, d=2000 o=3 r=(892,487,31,31)
19:58:01.442 00.000 13696 Error thrown from C:\cygwin\home\Andy\projects\phd2-build-20251209-235857\src\myframe_events.cpp:676->Error reported moving

It is this Error thrown from myframe_events.cpp.   I have not been able to find any information on this.  The only way I found to get it guiding again is to close both phd2 and green swamp server, restart them, and start guiding again.  Not sure if it is a mount issue, green swamp server issue, or phd2 issue.  Any advice would be greatly appreciated!

Frank