ZWO ASI 174 won't connect to PHD

77 views
Skip to first unread message

William Schubert

unread,
Apr 21, 2026, 12:04:27 PMApr 21
to Open PHD Guiding
PHD will not recognize my ZWO ASI174MM guide camera.  It will recognize my Imaging camera, the ASI 6200MM.  When I attach the 174 separately to my computer (MacBookPro), with the other camera disconnected, it always says "no camera found".  Different cables have the same result.  There are no additional drivers available to download from ZWO, since the Mac is native.  HOWEVER, if I connect the 174 to the 6200 via the 6200's built-in USB port, it DOES recognize the 174.  Then my problem becomes that I can't guide through PHD, because I am using a SB Paramount MX newer Series 6000 mount, which does NOT have the traditional serial port which I used with my older Series 5000 mount to make the traditional ST4 serial port connection between the 174 and the mount.  Ant ideas?  Thanks,
Bill

Ken H

unread,
Apr 21, 2026, 6:42:57 PMApr 21
to Open PHD Guiding
Are you using the ZWO native or ASCOM driver? If it is the ASCOM then use the little configuration button to make sure it is connecting to the 174.
I have one also and the interface is USB3 and not USB2 like from the ASI6200 back - check the port it is going into to make sure it is a 3. You may want to check the cable also as some are a little hit or miss.

Good luck,
Ken

Ken H

unread,
Apr 21, 2026, 6:44:25 PMApr 21
to Open PHD Guiding
Oh and get the latest drivers Native and ASCOM - https://www.zwoastro.com/software/

William Schubert

unread,
May 3, 2026, 1:24:23 AM (12 days ago) May 3
to Open PHD Guiding
I see where suggestions that I need ASCOM drivers, but that shouldn't apply to Mac computers.  For example, I have no problem connecting my ASI6200 primary imaging camera to my Mac via USB 3.0 Type C connectors, and I don't believe I have any special drivers to make that happen, but maybe I'm wrong and I'm just not aware of it.  I should clarify that I have both an ASI174MM Mini, as well as the standard ASI174MM.  The 174MM will connect to the Mac via the USB B (at camera) and USB C (at Mac) cable, but the 174MM Mini will not, with a direct USB C (at both camera and Mac) connector cable. Unfortunately, I can't use the standard 174MM as a guide camera, due to the longer length of the sensor from the OAG mirror.
Reply all
Reply to author
Forward
0 new messages