Madrix Nebula

Euan Clapworthy

unread,

Sep 12, 2019, 8:23:46 AM9/12/19

to open-lighting

Does anyone have experience using a Madrix Nebula.

I can output artnet from OLA on my Raspberry Pi to it fine, but it doesnt seem to pick up any E1.31 broadcasts. I don't know if there are specific settings in the E1.31 config file that need tweaking to configure it for a specific device?

Thanks

Sascha "MC Sushii" Büttner

unread,

Sep 12, 2019, 10:14:13 AM9/12/19

to open-lighting

I just asked my friends at the Madrid HQ.

The answer is simple, Nebula either supports Artnet OR SACN. Artnet is default. If you want to use SACN, use your web browser and enter the Nebula IP in the address field, then change the setting following your manual.

Good luck.

Sascha "MC Sushii" Büttner

unread,

Sep 12, 2019, 10:16:28 AM9/12/19

to open-lighting

Device Configuration

#DeepLink to the corresponding manual page

Am Donnerstag, 12. September 2019 14:23:46 UTC+2 schrieb Euan Clapworthy:

Euan Clapworthy

unread,

Sep 12, 2019, 10:51:58 AM9/12/19

to open-lighting

See the problem for me seems to be that I cannot choose what sort of data the Nebula accepts.

In the guide it suggests in the device config that there is an option called: "Device Accepts Network Data From", except this option is not available to me for some reason.

Euan Clapworthy

unread,

Sep 12, 2019, 10:57:48 AM9/12/19

to open-lighting

Ive attached a picture of my device configuration options as well

Capture.PNG

Sascha "MC Sushii" Büttner

unread,

Sep 12, 2019, 11:08:43 AM9/12/19

to open-lighting

You're on a pretty old firmware. Your screenshot says 1.4 while the image in the manual says 2.2. Please follow the instructions to update your Nebula, I bet this will bring the option up.

Euan Clapworthy

unread,

Sep 12, 2019, 11:48:54 AM9/12/19

to open-lighting

Okay thats got it, thanks. I'm on Madrix 3 which didnt let me update the Firmware, but I installed Madrix 5 and now its all working. Thanks a lot!

Sascha "MC Sushii" Büttner

unread,

Sep 12, 2019, 11:52:45 AM9/12/19

to open-lighting

Glad to see you got it up and running. You're welcome.

Reply all

Reply to author

Forward