Autodesk 2023 Product Keys

0 views

Skip to first unread message

Venice Sassone

unread,

Aug 3, 2024, 3:23:36 PM8/3/24

to oolpiweboo

With the newest release of Autodesk products, we bring you a new list of Autodesk 2019 product keys. Product keys are required for installation of Autodesk products and are used to differentiate products that are both sold independently and as part of a product suite. For example, installing AutoCAD 2019 as a point product requires product key 001K1, but installing AutoCAD 2019 from the AutoCAD Design Suite Premium 2019 requires product key 768K1. The same version of AutoCAD is in both software packages but the product key differentiates one package from the other.

Microsol Resources delivers integrated solutions that help customers design, simulate and analyze their ideas, increase operational efficiencies, and maximize their return on investment in their technology solutions. As a team, we are passionate about helping customers improve their productivity and overall business processes. How can we help? Just reach out.

Product keys are required for installation of Autodesk products and are used to differentiate products that are both sold independently and as part of a product suite. For example, installing AutoCAD 2018 as a point product requires product key 001J1, but installing AutoCAD 2018 from the AutoCAD Design Suite Premium 2018 requires product key 768J1. The same version of AutoCAD is in both software packages but the product key differentiates one package from the other.

Find Serial Numbers and Product Keys in Autodesk Account: Your Serial Number and Product Key are displayed in your Autodesk Account in the product tray on the Products & Services page and also again in the Software Download window. Note about serial number visibility in Autodesk Account: Only account administrators, such as Contract Managers and Software Coordinators, and Named Users with assigned software benefits will see serial numbers in Autodesk Account. You are the account administrator if you purchased a software subscription using your Autodesk Account or were assigned the role of Contract Manager or Software Coordinator by your company. If you do not see the software you wish to activate in your Autodesk account or see the message "Contact your admin for serial numbers," you need to contact the contract administrator. Only an administrator can assign you as a Named User or End User and give you permissions to download and activate the software.

If, for whatever reason, you cannot locate your product key, there is another method:
1. Using your installation media, (USB key, DVD, download folder, etc.) navigate to the location of the setup.exe file for your Autodesk product.
2. In that folder, look for a file named MID.txt, MID01.txt, MID02.txt or some variation on that name.
3. Open this file in notepad and verify that the product name is what you expected it to be.
4. The first five characters of the part number should also be the product key for that product.

Legacy Moldflow products (MPI6.1, MPA 8.0, or earlier versions) arenot supported. Legacy products will continue to be licensed using theMPS licensing system and although it will stay operational for existingcustomers, new development on MPS is not expected in the future.

The Autodesk Network LicenseManager cannot be installed on Linuxplatforms; however, Autodesk Moldflow Insight application softwareinstalled on Linux platforms can access licenses which are installed onWindows platforms.

When registering licenses, theserver machine may show multipleEthernet addresses in the LMTOOLS System Settings window. When thishappens, the command line utility ipconfig /all should be used toidentify the main network connection. The Physical Address for thisconnection can then be mapped back to the Ethernet Address in theLMTOOLS System Settings window, and the correct address can be chosen.

If you get a CD-StartUp Error,it means that you do not haveadministrator rights to install the software. Log in as Administrator,or run the installation as Administrator and then try again.

On machines where the user haslimited access permissions, it isnecessary to run the license configuration tools as an Administrator.This is achieved by right-clicking the tools icon and selecting Run asAdministrator from the list of options. Tools which require this levelof privilege escalation are LMTOOLS and Network License Server Settings.
If these tools are run without administrator-level privileges, usermodifications may not be saved correctly.

By default, the Autodesk License Manager (Moldflow) Daemon servicedoes not have any dependent services. It actually depends on the FLEXlmservice. Since the name of this service is controlled by the user, thisdependency cannot be created automatically during installation orprogrammatically at runtime. If you find that the licenses are notrecognised after rebooting your computer, you can manually create thedependency.

You must wait at least 35 seconds before requesting a license. Ittakes time for FLEXlm to respond to queries (usually 1-2 seconds perquery), so the more licenses you have, the longer you need to wait.

When either the Autodesk FlexLm server or the Autodesk LicenseManager (Moldflow) service cannot see the installed Autodesk Moldflowlicenses, please check if the registry entries for the Autodesk FlexLmservice are set up correctly.

CAUTION: Editing the registry can causesevere system-wide problems. Always backup your registry before makingany changes. Visit Microsoft Help and Support for help backing up your registry.

When using a firewall, port6014 TCP must be open on the server toallow clients to reserve licenses. If the port is not open, you willget a License check timed out error when attempting to open the GUI.

When using a local licenseserver, it is best to configure the licenseserver as either the name localhost or as the IP address 127.0.0.1.This ensures that network configuration changes will not affectlicensing.

For detailed help about your MoldflowProduct Security products, please see the built in on-line helpsystems. This troubleshooting guide contains only a short list ofcommonly asked questions about MPS.

If you wish to use Enterprise licensing, you mustinstall an MPS 2.3 license server (or later) on your network. Please becareful when installing Moldflow client software other than MPI 6.1 asthis may install an older version of the MPS license server.

Many UNIX systems require a CD-ROM to beexplicitly mounted before it can be accessed. Insert the CD into theCD-ROM drive and then enter the appropriate mount command for yoursystem from the following table.

When a Moldflow client product such as Moldflow PlasticsInsight (MPI) or Moldflow Plastics Advisers (MPA) attempts to performan operation, it first checks whether a required license (node-lockedor floating) is available on the license server. If a license isavailable, the client product reserves the license in a first come,first served order. The license is returned when the operation iscomplete.

Inan Enterprise licensing system, a communal pool of licenses exists on asingle license server. These licenses are referred to as Tasks.A user must reserve a task from the communal pool before he or sheundertakes an operation in a Moldflow client product. Only the tasksthat the user has reserved for his or her personal use are availablefor that user.

If the user does not have enough tasks to perform an operation, heor she must reserve more tasks. Task reservation is performed using theEnterprise Dashboard. A list of the tasks required to performparticular operations is included in the online help system of theEnterprise Dashboard. See the "What Task do I need?" topic.

If your Moldflow product crashes or you experience a hardware failure while you have a task reserved and in the Activestate, the task will be "orphaned" and will not automatically bereturned to the communal task pool. You will need to recover anyorphaned tasks manually. The orphaned task will be displayed as Active, but in this instance you may return it to the communal task pool.

If you have installed license keys on your server but you cannot see the server in the MPS Servers tab list, you may needto modify the settings on your firewall. Moldflow Product Securityrequires UDP port 1576 to be open in addition to TCP port 1576.Consult the documentation provided with your firewall software forinstructions on how to open these ports.

Youhave either not applied for a license keyfile from Moldflow, or youhave not extracted the license keyfile from the email sent to you byMoldflow. If you have not applied for a license keyfile from Moldflow,you should do so by following the steps in the Obtain License Keyswizard (Start > All Programs > Moldflow Product Security > Obtain License Keys).You should run this wizard on the computer that is to function as theserver. When you receive an email from Moldflow regarding keyfiles, youshould save the keyfile to your local machine.

Thismessage indicates that the same license key has already been installedon the Moldflow Product Security server that you specified. You cannotre-install the same license key without first removing the old version.

Youhave attempted to install the license key on a different server to thatspecified in the license keyfile. The license keyfile can only beinstalled on the server that is named in the license keyfile. If youare not sure which server this is, click the License Key Administration button. When the display updates, you will find the server name at the far right end of each keyfile line.

After completing the Moldflow Electronic Registration wizard, you will receive akeyfile from Moldflow. If you have renewed or upgraded your Moldflow licenses, you will also receive a new keyfile.This keyfile needs to be installed on a licenseserver.

UTC(Coordinated Universal Time) of the MPS server and all of its clientmachines must be within 30 minutes of each other. When clocks need tobe adjusted for daylight savings, you should not manually adjust thelocal clock on a machine. Instead you should change the local timezone.