Electrical Transformer: N6 N10 pre-stage output transformer
3 views
Skip to first unread message
Online Department Store
May 14, 2022, 11:51:12 PM5/14/22
to Online Department Store
The electrical transformer N6 N10 pre-stage output transformer is designed to provide a low impedance, high voltage source for driving the cathode of the electron gun in a vacuum tube. The transformer is wound with two coils of wire, each forming a separate leg of the circuit. The primary coil is connected to an alternating current supply, while the secondary coil is connected to the load. When current flows through the primary coil, it creates a magnetic flux that flows through the secondary coil. This induces a voltage in the secondary coil, which is proportional to the number of turns in the primary coil and the rate of change of current.
This transformer is used in conjunction with the N4 output transformer, which has four turns in its primary winding and four turns in its secondary winding.
Electrical Transformer: N6 N10 pre-stage output transformer
This transformer is used in conjunction with the N4 output transformer, which has four turns in its primary winding and four turns in its secondary winding.
Electrical Transformer: N6 N10 pre-stage output transformer
Reply all
Reply to author
Forward
0 new messages