Skip to first unread message
OneStop Systems
Jan 16, 2020, 5:49:59 PM1/16/20
to One Stop Systems
To turn ON & OFF the EB16 smart using web GUI
1. Connect power to the EB16.
2. Flip the power supply switch to ON position.
3. Plug in the Ethernet cable to the RJ45 port located on the back of the EB16.
4. Plug in the other end of the Ethernet cable to laptop.
5. Configure the Network setting. Change Adapter Settings. Select Ethernet, and right click then select properties. Select TCP/IPv4. Select properties. Select "Use the following IP address". Type the following for
IP Address: 192.168.1.20
Subnet Mask: 255.255.255.0
6. Click OK; then Click OK again.
7. Start your Internet browser, type http://192.168.1.10/
8. It will prompt you to login. For user: default. For password: magma
9. Select Management Tab
10. Press the front button switch of the EB16 smart to ON position.
11 Refresh the GUI, the radio button "Turn ON chassis" should change to " Turn OFF Chassis"
( http://192.168.1.10/remote_management.html)
12. Press the radio button "Turn OFF chassis" to turn off the chassis. Then refresh the browser, the radio button should show "Turn ON chassis"
13. Press the radio button " Turn ON chassis", there is a 10 seconds delay before it will initiate powering ON to the chassis.
14. Refresh the browse, the radio button should show "Turn OFF chassis"
1. Connect power to the EB16.
2. Flip the power supply switch to ON position.
3. Plug in the Ethernet cable to the RJ45 port located on the back of the EB16.
4. Plug in the other end of the Ethernet cable to laptop.
5. Configure the Network setting. Change Adapter Settings. Select Ethernet, and right click then select properties. Select TCP/IPv4. Select properties. Select "Use the following IP address". Type the following for
IP Address: 192.168.1.20
Subnet Mask: 255.255.255.0
6. Click OK; then Click OK again.
7. Start your Internet browser, type http://192.168.1.10/
8. It will prompt you to login. For user: default. For password: magma
9. Select Management Tab
10. Press the front button switch of the EB16 smart to ON position.
11 Refresh the GUI, the radio button "Turn ON chassis" should change to " Turn OFF Chassis"
( http://192.168.1.10/remote_management.html)
12. Press the radio button "Turn OFF chassis" to turn off the chassis. Then refresh the browser, the radio button should show "Turn ON chassis"
13. Press the radio button " Turn ON chassis", there is a 10 seconds delay before it will initiate powering ON to the chassis.
14. Refresh the browse, the radio button should show "Turn OFF chassis"
Reply all
Reply to author
Forward
This conversation is locked
You cannot reply and perform actions on locked conversations.
0 new messages