hi , I want to create a manet simulation scenario with routing protocols OLSR and use tcp apps.
Number of mobile node is 30.
what needs to be imported to OLSR.ned ?
Thank you.
In the example aodv you can chose OLSR like routing protocol, you can use the example like start point
--
You received this message because you are subscribed to the Google Groups "OMNeT++ Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to omnetpp+u...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
thank you for the help.
which one should I choose between OLSR.ned and OLSROPT.ned to nodes with OLSR routing ?
OLSR, OLSROPT is an experimental variant that tries to optimize the computation time
what is the difference between OLSR and OLSROPT ?
which one should I use for the standard OLSR routing ? whether OLSR or OLSROPT ?
OLSR
See the AdhocHost node,
It is enough to set in the ini file
**.manetRouting = “OLSR”
The basic routing examples use UDP
And the inet examples usually use TCP
Okay, i am done with OLSR node and routing protocol. And now, where i can see an example of a file transfer using protocol UDP and TCP ?
You have a network with dynamic creation nodes, at the beginning of the simulation there isn’t nodes. If the nodes are included in the simulation area one by one, there is a high possibility that the server is not in present, and, also the possibility that two nodes could communicate can be very low.
De: omn...@googlegroups.com [mailto:omn...@googlegroups.com] En nombre de agustinus dimas Fitriyanto
Enviado el: martes, 14 de abril de 2015 19:25
Para: omn...@googlegroups.com
Asunto: Re: [Omnetpp-l] Create a manet simulation scenario
I have warning in omnetpp.ini and my udpapp is not work...
Here my warning
Pada Jumat, 03 April 2015 20.21.03 UTC+7, agustinus dimas Fitriyanto menulis:
Thank you for your help....
Pada Rabu, 25 Maret 2015 14.43.33 UTC+7, Fayruz Rahma menulis:
On Tuesday, March 24, 2015 at 10:10:45 AM UTC+7, agustinus dimas Fitriyanto wrote:Okay, i am done with OLSR node and routing protocol. And now, where i can see an example of a file transfer using protocol UDP and TCP ?
Example of TCP file transfer: /inet/examples/inet/tcpclientserver
Example of UDP file transfer: /inet/examples/inet/udpburst
--
The server must be present always.
Here my warning
Pada Jumat, 03 April 2015 20.21.03 UTC+7, agustinus dimas Fitriyanto menulis:
Thank you for your help....
Pada Rabu, 25 Maret 2015 14.43.33 UTC+7, Fayruz Rahma menulis:
On Tuesday, March 24, 2015 at 10:10:45 AM UTC+7, agustinus dimas Fitriyanto wrote:Okay, i am done with OLSR node and routing protocol. And now, where i can see an example of a file transfer using protocol UDP and TCP ?
Example of TCP file transfer: /inet/examples/inet/tcpclientserver
Example of UDP file transfer: /inet/examples/inet/udpburst
--
You received this message because you are subscribed to the Google Groups "OMNeT++ Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to omnetpp+u...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
To unsubscribe from this group and stop receiving emails from it, send an email to omnetpp+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
**.host[2..19].mobilityType = "RandomWPMobility"
**.host[2..19].mobility.speed = uniform(20mps,50mps)
**.host[2..19].mobility.waitTime = uniform(3s,8s)
With these parameters I have mi dude that OLSR can work, OLSR doesn’t work well in high mobility conditions
**.routingProtocol = "AODVUU"
**.hello_jittering = false
**.optimized_hellos = false #tetap mengirim hello paket walaupun tidak ada active routes
#*.*MN*.manetrouting.broadcastDelay = 1s
*.*MN*.manetrouting.broadcastDelay = 1s
**.manetrouting.EqualDelay = true
**.expanding_ring_search = true
**.local_repair = true
**.rreq_gratuitous = false
**.rt_log_interval = 0
**.unidir_hack = 0
**.internet_gw_mode = 0
**.receive_n_hellos = 10
**.ratelimit = 2
**.llfeedback = false# //1000
**.wait_on_reboot = 0
**.active_timeout = 3000ms
**.internet_gw_address = "0.0.0.0"