Could anyone please help: Veins, TraCI server reported error when Send Data via SCH?

[wx1...@my.bristol.ac.uk]

Hi all,

I'm using my own map in veins, I changed the code accordingly and enabled ''sendData'' in the .ini file. However error message shown below pops up during simulation running. Could any one please help me here?

Many thanks in advance!
BR

 
<!> Error in module (TraCIDemo11p) RSUExampleScenario.node[0].appl (id=14) at event #1342, t=13.75435911562: TraCI server reported error executing command 0xc4 ("Referenced edge 'Some Data' is not known.")..

TRAPPING on the exception above, due to a debug-on-errors=true configuration option. Is your debugger ready?

Simulation terminated with exit code: 133
Working directory: /home/Toshiba/omnetpp-4.6/samples/veins/examples/veins
Command line: opp_run -r 0 -n .:../../src/veins --tkenv-image-path=../../images -l ../../src/veins omnetpp.ini

[David Eckhoff]

without having checked it, i think in the tracidemo, a vehicle reports a
traffic jam on a specific edge. This edge is part of the demo map.
I'm not sure whether the edge name is hardcoded in the tracidemo
applayer or set somewhere else, but this is causing the problem, because
this edge is not in your new map obviously.
If you're using the normal tracidemo applayer, sendData will do nothing
else but send this accident information, so there is really no need to
enable it.

- david

On 23.11.2016 07:02, wx1...@my.bristol.ac.uk wrote:
>
> Hi all,
>
> I'm using my own map in veins, I changed the code accordingly and

> enabled *''sendData''* in the .ini file. However error message shown

> below pops up during simulation running. Could any one please help me here?
>
> Many thanks in advance!
> BR
>
>
> <!> Error in module (TraCIDemo11p) RSUExampleScenario.node[0].appl

> (id=14) at event #1342, t=13.75435911562: *TraCI server reported error
> executing command 0xc4 ("Referenced edge 'Some Data' is not known.")..*

>
> TRAPPING on the exception above, due to a debug-on-errors=true
> configuration option. Is your debugger ready?
>
> Simulation terminated with exit code: 133
> Working directory: /home/Toshiba/omnetpp-4.6/samples/veins/examples/veins
> Command line: opp_run -r 0 -n .:../../src/veins
> --tkenv-image-path=../../images -l ../../src/veins omnetpp.ini
>

> --
> You received this message because you are subscribed to the Google
> Groups "OMNeT++ Users" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to omnetpp+u...@googlegroups.com
> <mailto:omnetpp+u...@googlegroups.com>.
> Visit this group at https://groups.google.com/group/omnetpp.
> For more options, visit https://groups.google.com/d/optout.


--
Dipl.-Inf. Univ. David Eckhoff
Computer Networks and Communication Systems
University of Erlangen, Germany
Phone: +49 9131 85-27627 / Fax: +49 9131 85-27409
mailto:eck...@cs.fau.de
http://www7.cs.fau.de/~eckhoff/