INET framework

[Lynda Algerienne]

Hello,

I would like to use the INET framework but when I build the project I got two errors.
Could any one explain me the installation procedure (how to import it using the IDE)

Nb. My Omnet++4.2 works correctly

[sagar pareek]

Hello, i m telling yo for the linux environment
Extract your inet tar ball in the workspace of onmetpp which is by default ( omnetpp-4.1/samples )
the open ur omnetpp and open file->import.
then in 'general' select 'existing project in workspace'  and click next
now select ur workspace (omnetpp-4.1/samples) and click finish

now wait for 5-10 seconds and press ctrl+b

the u r done :)

--
Sent from the OMNeT++ mailing list. To configure your membership,
visit http://groups.google.com/group/omnetpp

--
Regards
SAGAR PAREEK
COMPUTER SCIENCE AND ENGINEERING
NIT ALLAHABAD

[Lynda Algerienne]

Hello,

Thank you very much for your reply.

I am using Omnet++4.2 win 32 for Windows.
I tried several times to import Inet but I had always theses errors:

networklayer/rsvp_te/RSVPPacket.h:19:26: fatal error: RSVPPacket_m.h: No such file or directory
make[1]: Leaving directory `/c/Omnet/omnetpp-4.2/samples/inet/src'
compilation terminated.
make[1]: *** [../out/gcc-debug/src/networklayer/rsvp_te/RSVP.o] Error 1
make: *** [all] Error 2

Has any one test the Inet framework under Windows?

Best regards,

2011/12/19 sagar pareek <sagar...@gmail.com>

[naveen chauhan]

   as per given instruction. import the inet framework, build the project. if you still get RSVPPacket error, open the RSVPPacket.h file , write anything there, don't forget to delete it before saving, our purpose is just change the date of RSVPPacket.h file. now again build the project...  surely it will work..

[Alfonso Ariza Quintana]

The file is RSVPPacket.msg

[Daniel Pfefferkorn]

Alternatively to opening and closing, you can manually trigger the
creation of the desired _m.*-files from command line.

Make sure you have the omnet4.2/bin directory in your path and navigate
to the networklayer/rsvp_te/ directory. Once there type:

$ opp_msgc RSVPPacket.msg

This will build the necessary files for you.

Good luck!
Daniel

Am 19.12.2011 20:55, schrieb Lynda Algerienne:
> Hello,
>
> Thank you very much for your reply.
>
> I am using Omnet++4.2 win 32 for Windows.
> I tried several times to import Inet but I had always theses errors:
>
> networklayer/rsvp_te/RSVPPacket.h:19:26: fatal error: RSVPPacket_m.h: No
> such file or directory
> make[1]: Leaving directory `/c/Omnet/omnetpp-4.2/samples/inet/src'
> compilation terminated.
> make[1]: *** [../out/gcc-debug/src/networklayer/rsvp_te/RSVP.o] Error 1
> make: *** [all] Error 2
>
> Has any one test the Inet framework under Windows?
>
> Best regards,
>
>
>
>
>
>
> 2011/12/19 sagar pareek <sagar...@gmail.com

> <mailto:sagar...@gmail.com>>

>
> Hello, i m telling yo for the linux environment
> Extract your inet tar ball in the workspace of onmetpp which is by
> default ( omnetpp-4.1/samples )
> the open ur omnetpp and open file->import.
> then in 'general' select 'existing project in workspace' and click next
> now select ur workspace (omnetpp-4.1/samples) and click finish
>
> now wait for 5-10 seconds and press ctrl+b
>
> the u r done :)
>
> On Mon, Dec 19, 2011 at 10:00 PM, Lynda Algerienne
> <lynda.al...@gmail.com <mailto:lynda.al...@gmail.com>> wrote:
>
> Hello,
>
> I would like to use the INET framework but when I build the
> project I got two errors.
> Could any one explain me the installation procedure (how to
> import it using the IDE)
>
> Nb. My Omnet++4.2 works correctly
>
>
>
> --
> Sent from the OMNeT++ mailing list. To configure your membership,
> visit http://groups.google.com/group/omnetpp
>
>
>
>
> --

> /**/Regards

> SAGAR PAREEK
> COMPUTER SCIENCE AND ENGINEERING
> NIT ALLAHABAD
>
> --
> Sent from the OMNeT++ mailing list. To configure your membership,
> visit http://groups.google.com/group/omnetpp
>
>
> --
> Sent from the OMNeT++ mailing list. To configure your membership,
> visit http://groups.google.com/group/omnetpp

--
M.Sc. Daniel Pfefferkorn

Institute of Microelectronic Systems

Leibniz University Hannover phone: +49 (511) 762 - 19609
Appelstr. 4 fax: +49 (511) 762 - 19601
30167 Hannover e-mail: pfef...@ims.uni-hannover.de
Germany

[Lynda Algerienne]

Hello,

Thank you very much for your useful explanation.

I followed your instructions and my INET works correctly.


Best regards,
Samia
Phd student

2011/12/20 Daniel Pfefferkorn <daniel.pf...@ims.uni-hannover.de>

[Daniel Pfefferkorn]

Glad it worked for you!
Daniel

Am 20.12.2011 14:41, schrieb Lynda Algerienne:
> Hello,
>

> Thank you very much for your useful explanation.
>
> I followed your instructions and my INET works correctly.
>
>
> Best regards,
> Samia
> Phd student
>
>
> 2011/12/20 Daniel Pfefferkorn <daniel.pf...@ims.uni-hannover.de

> <mailto:daniel.pf...@ims.uni-hannover.de>>

> > <mailto:sagar...@gmail.com <mailto:sagar...@gmail.com>>>

> >
> > Hello, i m telling yo for the linux environment
> > Extract your inet tar ball in the workspace of onmetpp which is by
> > default ( omnetpp-4.1/samples )
> > the open ur omnetpp and open file->import.
> > then in 'general' select 'existing project in workspace' and
> click next
> > now select ur workspace (omnetpp-4.1/samples) and click finish
> >
> > now wait for 5-10 seconds and press ctrl+b
> >
> > the u r done :)
> >
> > On Mon, Dec 19, 2011 at 10:00 PM, Lynda Algerienne
> > <lynda.al...@gmail.com
> <mailto:lynda.al...@gmail.com>

> <mailto:lynda.al...@gmail.com

> <tel:%2B49%20%28511%29%20762%20-%2019609>

> Appelstr. 4 fax: +49 (511) 762 - 19601

> <tel:%2B49%20%28511%29%20762%20-%2019601>
> 30167 Hannover e-mail:
> pfef...@ims.uni-hannover.de <mailto:pfef...@ims.uni-hannover.de>

[Lynda Algerienne]

Hello,

Please I want to import The IEEE802.11Mac from the Inet .

When writing

import inet.src.linklayer.ieee80211.mac.Ieee80211Mac.ned;

an error occurs. Could any one explain me how to import some files from INET?
Best regards,
samia

[Lynda Algerienne]

Hello,

I want to import the Ieee802.11 Mac form the Inet. I had the following error:

imported NED type not found: 'inet.src.linklayer.ieee80211.mac.Ieee80211Mac.ned'                      line 19   NED Consistency Problem

2011/12/20 Daniel Pfefferkorn <daniel.pf...@ims.uni-hannover.de>

[Böjthe Zoltán]

Hi!

import inet.linklayer.ieee80211.mac.Ieee80211Mac;

Zoltan

 

On Wed, 21 Dec 2011 09:41:19 -0500, Lynda Algerienne wrote:

Hello,

 

I want to import the Ieee802.11 Mac form the Inet. I had the following error:

 

 

 

imported NED type not found: 'inet.src.linklayer.ieee80211.mac.Ieee80211Mac.ned'                      line 19   NED Consistency Problem

 

 

 

 

 

2011/12/20 Daniel Pfefferkorn <daniel.pf...@ims.uni-hannover.de>

Glad it worked for you!
Daniel


Am 20.12.2011 14:41, schrieb Lynda Algerienne:
> Hello,
>

> Thank you very much for your useful explanation.
>
> I followed your instructions and my INET works correctly.
>
>
> Best regards,
> Samia
> Phd student
>
>
> 2011/12/20 Daniel Pfefferkorn <daniel.pf...@ims.uni-hannover.de

> daniel.pf...@ims.uni-hannover.de>>

>     sagar...@gmail.com>

>     > sagar...@gmail.com sagar...@gmail.com>>>

>     >
>     >     Hello, i m telling yo for the linux environment
>     >     Extract your inet tar ball in the workspace of onmetpp which is by
>     >     default ( omnetpp-4.1/samples )
>     >     the open ur omnetpp and open file->import.
>     >     then in 'general' select 'existing project in workspace'  and
>     click next
>     >     now select ur workspace (omnetpp-4.1/samples) and click finish
>     >
>     >     now wait for 5-10 seconds and press ctrl+b
>     >
>     >     the u r done :)
>     >
>     >     On Mon, Dec 19, 2011 at 10:00 PM, Lynda Algerienne
>     >     <lynda.al...@gmail.com

>     lynda.al...@gmail.com>

>     lynda.al...@gmail.com

>     Appelstr. 4                     fax:     +49 (511) 762 - 19601

>    
>     30167 Hannover                  e-mail:

>      pfef...@ims.uni-hannover.de pfef...@ims.uni-hannover.de>

>     Germany
>
>     --
>     Sent from the OMNeT++ mailing list. To configure your membership,
>     visit http://groups.google.com/group/omnetpp
>
>
> --
> Sent from the OMNeT++ mailing list. To configure your membership,
> visit http://groups.google.com/group/omnetpp


--
M.Sc. Daniel Pfefferkorn

Institute of Microelectronic Systems

Leibniz University Hannover     phone:   +49 (511) 762 - 19609
Appelstr. 4                     fax:     +49 (511) 762 - 19601
30167 Hannover                  e-mail:  pfef...@ims.uni-hannover.de
Germany

--
Sent from the OMNeT++ mailing list. To configure your membership,
visit http://groups.google.com/group/omnetpp

 

--

[Lynda Algerienne]

sorry I did not understand you

2011/12/21 Böjthe Zoltán <zbo...@urdeso.hu>

[Alfonso Ariza Quintana]

you must not include the ned extension.

import inet.linklayer.ieee80211.mac.Ieee80211Mac;  // correct

import inet.linklayer.ieee80211.mac.Ieee80211Mac.ned; // incorrect

 

 

From: Lynda Algerienne

Sent: Wednesday, December 21, 2011 5:56 PM

To: omn...@googlegroups.com

Subject: Re: [Omnetpp-l] INET framework

 

[Lynda Algerienne]

Yes I tried to import the package but I have also the same error.

My Inet is working and I have another Omnet Project which is also working and want to import the IEEE 802.11 fom Inet but it did not work

2011/12/21 Alfonso Ariza Quintana <aari...@hotmail.com>

[Alfonso Ariza Quintana]

ups, you try to use the inet code in your project , it’s no easy there are dependencies, for example the radio depends of the channelControl module, that use the mobility, the Mac needs the queue models …., it’s not easy

[Lynda Algerienne]

Hello,

Thank you very much for your reply.

It is not complicated. I just arrived to do it.

Best regards,
Samia
Phd student

[Lynda Algerienne]

Hello,

Sorry for my multiple transmissions.
I am writing a code on the top of the Ieee802.11 Mac layer of Inet framework.
During the initialization of my network I had the following error:



error in module ieee80211radio during network initialization. Model error:host not registred yet in channelcontrol.

Is any one familiar with such error?

Thank you in advance.

[Lynda Algerienne]

Hello,

I have a data packet and I would like to transmit it via the Ieee802.11 Mac and radio layers. 

is it possible to convert it to a ieee80211frame and send it?

I tried to use dynamic_cast but I had an error :   message pointer is NULL

Could any one help me?

Best regards,
Miss Samia.

[Muhammad Shahzad Rafique]

please tell me how can creat a data packet

[Lynda Algerienne]

hi,

I generated an Ieee80211 frame and want to send it.
how can I specify the content of the payload in the frame.
Thank you

2011/12/20, Alfonso Ariza Quintana <aari...@hotmail.com>:

[yonas berhanu]

has anyone tested the new ospfv2 protocol in INet? i wanted to know how stable it is for i wanted to  do a project
on modifying it to add the LSA throttling functionality of Cisco routers. Ofcourse the authors have indicated that it is yet under development

please..i appreciate any hints on this


BR
/Yonas
yoni...@gmail.com

[Neeraj Parashar]

Dear sir i am an m. tech. student.

        I am trying to run DSRUU code in omnet++ but not getting success. please help how can i run it.

[Alfonso Ariza Quintana]

the manet examples can run the dsr protocol without problems, I don't undertand your problems

---

Date: Sun, 13 Apr 2014 07:37:23 -0700
From: paras...@gmail.com
To: omn...@googlegroups.com
CC: aari...@hotmail.com

Subject: Re: [Omnetpp-l] INET framework

Dear sir i am an m. tech. student.

        I am trying to run DSRUU code in omnet++ but not getting success. please help how can i run it.

--
You received this message because you are subscribed to the Google Groups "omnetpp" group.
To unsubscribe from this group and stop receiving emails from it, send an email to omnetpp+u...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Jevy Lee]

Thks, your answer is right! It works

在 2011年12月20日星期二 UTC+8上午11:28:36，naveen chauhan写道：