Cam Clay Model

[Mohammad Islam]

Hi All,

Can any one provide a reference example of the bench mark problem for the Cam Clay Model used in Open GeoSys? I found following references:, but I am looking example of those problem

Kolditz, O., Gorke, U.-J., Shao, H., Wang, W., and Bauer, S. (2016). "Thermo-Hydro-Mechanical-Chemical Processes in Fractured Porous Media: Modelling and Benchmarking Benchmarking Initiatives." Springer.

>>>> Page:142, Section 7.3.1 to 145

Kolditz, O., Shao, H., Wang, J., and Bauer, S. (2015). "Thermo-Hydro-Mechanical-Chemical Processes in Fractured Porous Media: Modelling and Benchmarking Closed-Form Solutions." Springer.

>>>> Page :133, Section 7.3.1

Kolditz, O., Gorke, U.-J.,Shao, H., and Wang, W. (2010) “Thermo-Hydro-Mechanical-Chemical Processes in Fractured Porous Media Benchmarks and Examples” Lecture Notes in Computational Science and Engineering, Springer.

>>> Page 180, Section 9.2

https://svn.ufz.de/ogs/wiki/public/doc-auto/by_ext/msp/S_plasticity#Mm_cc_tri_s.msp

In addition, does source code of the Cam Clay model available in the Open Geosys?

Thanks in advance,

Regards,

Mohammad

Dr. Mohammad Nurul Islam

 

ORISE PostdoctoralResearcher

The National EnergyTechnology Laboratory (NETL)

US Department of Energy (DoE)

NETL-PGH, 84/309

 

Visiting Scholar

Civil and Environmental Engineering

University of Pittsburgh, USA

736 Benedum Hall,

3700 O'Hara St, Pittsburgh, PA 15213

Mobile: 1-412-3158889

Email: mn...@pitt.edu

[Lars Bilke]

Dear Mohammed,

you can find the source code here: https://github.com/ufz/ogs5

And the benchmarks here: https://github.com/ufz/ogs5-benchmarks

Best,
Lars

--
You received this message because you are subscribed to the Google Groups "ogs-devs" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ogs-devs+u...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

[Mohammad Islam]

Dear Lars,

Thank you for your kind reply.

I found Benchmark problem for Cam Caly in ogs5-benchmarks / HM / hm_cc_tri_s.**. But, did not find yet the Cam Clay model source code. In ogs6, under "MaterialLib>> SolidModels>>Ehlers" is available or Mohr Coulomb model is available in \MaterialLib\FractureModels.

I am wondering would you be kind to inform me in ogs5 where to find Cam Clay model? In general, conventional Cam Clay model violates the Thermodynamic Second law. That's why I am interested, how it is incorporated in OGS?

Regards,

Mohammad

[Wenqing Wang]

You can find it in rf_msp_new.cpp

[Mohammad Islam]

Dear Wang,

Thank you very much.

Regards,

Mohammad