ode-users

1–30 of 2108

0 selected

Vaillancourt, … Oleh Derevenko6

7/3/21

How can I limit a hinge2 joint to a single direction?

Hi Danny, I guess, we can add the minimum limit as a separate parameter if you find it useful. Why

unread,

How can I limit a hinge2 joint to a single direction?

Hi Danny, I guess, we can add the minimum limit as a separate parameter if you find it useful. Why

7/3/21

Georgii Viznyuk

6/12/21

Integrating ODE4j for OBB-OBB intersetion

Greetings, I have a working collision detection algorithm that creates contact points for a OBB-OBB

unread,

Integrating ODE4j for OBB-OBB intersetion

Greetings, I have a working collision detection algorithm that creates contact points for a OBB-OBB

6/12/21

5/26/21

Bitbucket Pipeline Changes

Hi, They appear to have changed pipelines at Bitbucket and now they provide an image with GCC but

unread,

Bitbucket Pipeline Changes

Hi, They appear to have changed pipelines at Bitbucket and now they provide an image with GCC but

5/26/21

taro, Oleh Derevenko3

5/13/21

How to solve “ODE Message 3: LCP internal error, s <= 0 (s=-0.0000e+00)"

Sorry for my late reply. Your advice is very helpful. Thank you so much. 2021年5月9日日曜日 23:48:07 UTC+9

unread,

How to solve “ODE Message 3: LCP internal error, s <= 0 (s=-0.0000e+00)"

Sorry for my late reply. Your advice is very helpful. Thank you so much. 2021年5月9日日曜日 23:48:07 UTC+9

5/13/21

5/9/21

mass radius of sphere

hi, i have a sphere and plane setup with gravity. i expect that the sphere will bounce back from the

unread,

mass radius of sphere

hi, i have a sphere and plane setup with gravity. i expect that the sphere will bounce back from the

5/9/21

Peter...@btinternet.com2

4/23/21

Trimesh moving in wrong (opposite) direction !

Okay, rookie mistake, normals on surfaces were pointing inwards ! D'oh ! PeterO On Friday, 23

unread,

Trimesh moving in wrong (opposite) direction !

Okay, rookie mistake, normals on surfaces were pointing inwards ! D'oh ! PeterO On Friday, 23

4/23/21

Peter...@btinternet.com2

4/16/21

Trimesh-Trimesh collision: Find which triangles involved.

After some "digging about" in the sources, I've found the "side1" and "

unread,

Trimesh-Trimesh collision: Find which triangles involved.

After some "digging about" in the sources, I've found the "side1" and "

4/16/21

Peter...@btinternet.com, … Rodrigo Hernandez6

4/7/21

ODE in simple VR simulation

> Anything involving convex and cylinder shapes seems to be completely > broken (at least with

unread,

ODE in simple VR simulation

> Anything involving convex and cylinder shapes seems to be completely > broken (at least with

4/7/21

codi...@gmail.com3

3/11/21

teleporting jointed bodies

Just for anyone with a similar issue who finds the original post, I finally got round to trying my

unread,

teleporting jointed bodies

Just for anyone with a similar issue who finds the original post, I finally got round to trying my

3/11/21

3/10/21

Simple movement loop using hinge joints

Hi! I've recently started to use ODE and I'm trying to simulate the movement of a

unread,

Simple movement loop using hinge joints

Hi! I've recently started to use ODE and I'm trying to simulate the movement of a

3/10/21

Riley Ilieva, … Oleh Derevenko15

2/18/21

Making 64-bit ode.dll on Windows

How could they get into your project settings if you were not adding them there? Oleh Derevenko --

unread,

Making 64-bit ode.dll on Windows

How could they get into your project settings if you were not adding them there? Oleh Derevenko --

2/18/21

Vaillancourt, Oleh Derevenko3

2/8/21

How do I get all the bodies of the world?

Thanks Oleh! Our system allows multiple software parts to add bodies to our simulation, this is why

unread,

How do I get all the bodies of the world?

Thanks Oleh! Our system allows multiple software parts to add bodies to our simulation, this is why

2/8/21

hironori takai, Vaillancourt2

2/8/21

I have a question about timers.

> I want to display the simulation in real time when drawing the screen with drawstuff. What does

unread,

I have a question about timers.

> I want to display the simulation in real time when drawing the screen with drawstuff. What does

2/8/21

1/15/21

About other physics engines.

About other physics engines. I'm wondering how the implementation is different from other physics

unread,

About other physics engines.

About other physics engines. I'm wondering how the implementation is different from other physics

1/15/21

12/5/20

I have a question about friction.

Is it possible to set the coefficient of friction for the hinge joint of the axis of rotation in the

unread,

I have a question about friction.

Is it possible to set the coefficient of friction for the hinge joint of the axis of rotation in the

12/5/20

Florent Monnier

11/20/20

How to replace deprecated: dCreateGeomTransform()

Hi, I'm not the original author of the ocaml-ode bindings, but I maintain it since several years

unread,

How to replace deprecated: dCreateGeomTransform()

Hi, I'm not the original author of the ocaml-ode bindings, but I maintain it since several years

11/20/20

10/22/20

Please tell me how to build and install drawstuff included in the library in linux environment.

Please tell me how to build and install drawstuff included in the library in linux environment.

unread,

Please tell me how to build and install drawstuff included in the library in linux environment.

Please tell me how to build and install drawstuff included in the library in linux environment.

10/22/20

10/18/20

On Heightfield collider

Hi, Why does the heightfield collider assign contact normal as negated plane normal? dOPESIGN(

unread,

On Heightfield collider

Hi, Why does the heightfield collider assign contact normal as negated plane normal? dOPESIGN(

10/18/20

Tyler L, Oleh Derevenko4

10/15/20

Fixed Cython bug with bindings for PyPy3

Alright, changed it the way you suggested. Oleh Derevenko -- Skype with underscore GPG Key

unread,

Fixed Cython bug with bindings for PyPy3

Alright, changed it the way you suggested. Oleh Derevenko -- Skype with underscore GPG Key

10/15/20

Vaillancourt, Oleh Derevenko5

10/13/20

Unable to run the demos "out of the box" using CMake and Visual Studio 2017.

Hi Oleh! I have tested them and it seems to work as expected, thanks a lot! - Vaillancourt Hi

unread,

Unable to run the demos "out of the box" using CMake and Visual Studio 2017.

Hi Oleh! I have tested them and it seems to work as expected, thanks a lot! - Vaillancourt Hi

10/13/20

10/4/20

The MFR-LQ project I manage has completely overcome the problem of getting angles and is now the perfect version.

The project of MFR-LQ (Model Free Recursive LQ Controller) [sourceforge.net, OSDN], a software that

unread,

The MFR-LQ project I manage has completely overcome the problem of getting angles and is now the perfect version.

The project of MFR-LQ (Model Free Recursive LQ Controller) [sourceforge.net, OSDN], a software that

10/4/20

takai hironori, … Bill Sellers3

10/1/20

This is a rudimentary question.

There's not a lot actually published. Your best source is Russ Smith's chapter in Games

unread,

This is a rudimentary question.

There's not a lot actually published. Your best source is Russ Smith's chapter in Games

10/1/20

takai hironori, Danny Chapman2

10/1/20

About the return value of dBodyGetAngularVel();.

dBodyGetAngularVel works as expected - it is after all pretty fundamental. Perhaps the object you

unread,

About the return value of dBodyGetAngularVel();.

dBodyGetAngularVel works as expected - it is after all pretty fundamental. Perhaps the object you

10/1/20

Bram Stolk, Oleh Derevenko2

9/17/20

Single sided, concave, closed triangle meshes.

Does not look like the author of Gimpact is still here. ☹ Oleh Derevenko -- Skype with underscore GPG

unread,

Single sided, concave, closed triangle meshes.

Does not look like the author of Gimpact is still here. ☹ Oleh Derevenko -- Skype with underscore GPG

9/17/20

takai hironori, Bill Sellers2

9/12/20

I'm having trouble getting the angle of MFR-LQ Project.

Angles are a huge pain in the neck, and to do what you want I think you will have to maintain a local

unread,

I'm having trouble getting the angle of MFR-LQ Project.

Angles are a huge pain in the neck, and to do what you want I think you will have to maintain a local

9/12/20

Vaillancourt, Oleh Derevenko4

8/16/20

A few questions about 0.16.2 on Windows with Visual Studio

From: ode-users@googlegroups.com <ode-users@googlegroups.com> On Behalf Of Vaillancourt >

unread,

A few questions about 0.16.2 on Windows with Visual Studio

From: ode-users@googlegroups.com <ode-users@googlegroups.com> On Behalf Of Vaillancourt >

8/16/20

8/16/20

The Mutexgear library

Hi all, I've once mentioned back in 2018 I've been granted a patent on implementing event

unread,

The Mutexgear library

Hi all, I've once mentioned back in 2018 I've been granted a patent on implementing event

8/16/20

Nikita Mikhaylov, … Markus Rickert4

8/13/20

Static library with CMake.

> Hello! I want to use your repository as a git submodule, for example. > Then build from

unread,

Static library with CMake.

> Hello! I want to use your repository as a git submodule, for example. > Then build from

8/13/20

7/30/20

0.16.2 has been published

Hi, I've published 0.16.2 release to include the issue #70 fix (possible bad memory write in the

unread,

0.16.2 has been published

Hi, I've published 0.16.2 release to include the issue #70 fix (possible bad memory write in the

7/30/20

Oleh Derevenko, … David Guillen Fandos9

7/28/20

Bug in QuadTree space?

Thank you David, fixed it. Please use the latest commits in “0.16.x” or “master”. Oleh Derevenko --

unread,

Bug in QuadTree space?

Thank you David, fixed it. Please use the latest commits in “0.16.x” or “master”. Oleh Derevenko --

7/28/20

Search

Clear search

Close search

Google apps

Main menu