Download Driver Jinka 721.epub

0 views

Skip to first unread message

Traful Stakelbeck

unread,

Jul 1, 2024, 5:33:11 PM (9 hours ago) Jul 1

to obpiagreenwi

How to install driver Jinka 721 for cutting sticker machine

If you have a Jinka 721 cutting sticker machine, you may need to install the driver on your computer to connect and operate it. In this article, we will show you how to install the driver Jinka 721 for Windows 10 and CorelDraw.

Step 1: Download the driver Jinka 721

The first step is to download the driver Jinka 721 from the official website of the manufacturer. You can find the link to the driver in the description of this video. Alternatively, you can also search for "driver Jinka 721" on Bing and find the download link from the web search results. The driver file is in ZIP format, so you need to extract it after downloading.

Download Driver Jinka 721.epub

Download ->>> https://www.google.com/url?hl=en&q=https://lpoms.com/2ySLBg&source=gmail&ust=1719955988554000&usg=AOvVaw1AYTe2N0slDKjmopEpdsZu

Step 2: Configure Windows 10 settings

The next step is to configure some settings on your Windows 10 system to allow the installation of the driver Jinka 721. You need to disable the driver signature enforcement and enable the test mode on your Windows 10. To do this, follow these steps:

Press the Windows key + X and select Command Prompt (Admin) from the menu.

Type "bcdedit /set testsigning on" and press Enter. You should see a message saying "The operation completed successfully".

Type "shutdown /r /o" and press Enter. This will restart your computer and open the Advanced Startup Options menu.

Select Troubleshoot > Advanced Options > Startup Settings > Restart.

Press F7 to select Disable driver signature enforcement.

Wait for your computer to boot up normally.

You should see a watermark on the bottom right corner of your screen saying "Test Mode Windows 10". This means that you have successfully configured your Windows 10 settings.

Step 3: Install the driver Jinka 721

The final step is to install the driver Jinka 721 on your computer. To do this, follow these steps:

Connect your Jinka 721 cutting sticker machine to your computer using a USB cable.

Open the Device Manager by pressing the Windows key + X and selecting Device Manager from the menu.

Find the device named "USB-SERIAL CH340" under Other devices or Ports (COM & LPT). Right-click on it and select Update driver.

Select Browse my computer for driver software.

Select Let me pick from a list of available drivers on my computer.

Select Have Disk and browse to the folder where you extracted the driver Jinka 721 in Step 1. Select the file named "CH341SER.INF" and click Open.

Click OK and then Next. The installation process will begin and you should see a message saying "Windows has successfully updated your driver software".

Click Close and then check the Device Manager again. You should see a new device named "USB-SERIAL CH340" under Ports (COM & LPT) with a COM number assigned to it. Note down this COM number as you will need it later.

You have successfully installed the driver Jinka 721 on your computer.

Step 4: Configure CorelDraw settings

The last step is to configure some settings on your CorelDraw software to connect and operate your Jinka 721 cutting sticker machine. To do this, follow these steps:

Open CorelDraw and create a new document or open an existing one.

Select File > Print or press Ctrl + P to open the Print dialog box.

Select GoldCut JK Series from the Printer list and click Preferences.

Select Port Settings and choose the COM number that matches the one you noted down in Step 3. Click OK.

Select Cut/Plot from the left panel and adjust the settings according to your preferences. For example, you can change the speed, force, offset, blade type, etc. Click OK.

Select Layout from the left panel and adjust the settings according to your preferences. For example, you can change the orientation, size, position, copies, etc. Click OK.

Click Print to send your design to your Jinka 721 cutting sticker machine.

You have successfully configured your CorelDraw settings and you can now use your Jinka 721 cutting sticker machine.

Conclusion

In this article, we have shown you how to install the driver Jinka 721 for cutting sticker machine on Windows 10 and CorelDraw. We hope that this article was helpful and informative. If you have any questions or feedback, please leave a comment below. Thank you for reading!