$10 "Arduinos"

[Ben Combee]

Check out http://www.solarbotics.com/products/kardw/

I love it! An ATmega328 plus all the support electronics needed for
it to run code, be reset, and be programmed with an FTDI cable for $10
and a board footprint no larger than the bare DIP package.

[Ryan Micallef]

I'm going to buy 5 or 8 of these. Anyone want in on shipping?

> --
>
> You received this message because you are subscribed to the Google Groups
> "NYCResistor:Microcontrollers" group.
> To post to this group, send email to
> nycresistormi...@googlegroups.com.
> To unsubscribe from this group, send email to
> nycresistormicrocon...@googlegroups.com.
> For more options, visit this group at
> http://groups.google.com/group/nycresistormicrocontrollers?hl=en.
>
>
>

[ad...@babbageengineworks.com]

On Wed, 16 Dec 2009, Ryan Micallef wrote:

> I'm going to buy 5 or 8 of these. Anyone want in on shipping?
>

Actually, shipping is free on orders of 75 or more. That's eight, and I'd be
good for two.

m/a

[ad...@babbageengineworks.com]

On Wed, 16 Dec 2009, Ryan Micallef wrote:

> I'm going to buy 5 or 8 of these. Anyone want in on shipping?

Okay, PS and all that. To make sure the order exceeds the $75 free ship
minimum, I'd like a 3.5V FTDI adapter, too...

http://www.solarbotics.com/products/50512/

After all, got to talk to the adweeny somehow...

a/m

[Ben Combee]

I'm in for two of the Adweeny boards.

[Nick Vermeer]

I'll take two as well.

[Eric Skiff]

3 for me please, if I'm not too late!
-E

--
Eric Skiff
http://amplify.com
917-284-8124

What I'm Reading: http://rigeekulous.amplify.com | Twitter: http://twitter.com/ericskiff | NYC Resistor: http://NYCResistor.com

[Ryan Micallef]

Me: 5 = $50
Ada: 2 + USB FTDI adapter = $34
Ben: 2 = $20
Nick: 2 = $20
Skiff: 3 = $30
Liz: 8 = $80

Ada - you said "3.5" volt.  Did you mean the 5 volt (which is the link you sent) or the 3.3 volt?  Just want to make sure.

Reply if any corrections.  I assume everyone can just leave cash in my locker at Resistor or swap cash for parts at a meeting? 

I have a busy day ahead - I will place the order as above this afternoon or evening unless I hear otherwise.

R

[Nasir Barday]

If you're cool with ordering for someone you haven't met in person yet, I'd like to go in for 2 + an FTDI adapter, too. I can swing by the next meeting to make the swap.

I'm also going to the ITP show Monday night, if that makes things easier.

- Nasir

[Mike Lehman]

1 for me please and a 5v FTDI

-mike

[Ananda]

Hi. I was trying to make one of these without a breadboard but
failed. Was going to put it in Icetube clock. Sorry I haven't meet
most of you and I am not a NYCR member. Still I was wondering if I
can get in on this group order. I live in NYC, can pay by paypal or in
person. If that okay and I am not too late.. 1 adweeny please.

On Dec 17, 1:25 pm, Mike Lehman <michael.leh...@gmail.com> wrote:
> 1 for me please and a 5v FTDI
>
> -mike
>

> On Thu, Dec 17, 2009 at 12:20 PM, Nasir Barday <nbar...@gmail.com> wrote:
> > If you're cool with ordering for someone you haven't met in person yet, I'd
> > like to go in for 2 + an FTDI adapter, too. I can swing by the next meeting
> > to make the swap.
>
> > I'm also going to the ITP show Monday night, if that makes things easier.
>
> > - Nasir
>

> > On Thu, Dec 17, 2009 at 11:46 AM, Ryan Micallef <mical...@gmail.com>wrote:
>
> >> Me: 5 = $50
> >> Ada: 2 + USB FTDI adapter = $34
> >> Ben: 2 = $20
> >> Nick: 2 = $20
> >> Skiff: 3 = $30
> >> Liz: 8 = $80
>
> >> Ada - you said "3.5" volt.  Did you mean the 5 volt (which is the link you
> >> sent) or the 3.3 volt?  Just want to make sure.
>
> >> Reply if any corrections.  I assume everyone can just leave cash in my
> >> locker at Resistor or swap cash for parts at a meeting?
>
> >> I have a busy day ahead - I will place the order as above this afternoon
> >> or evening unless I hear otherwise.
>
> >> R
>

> >> On Thu, Dec 17, 2009 at 11:03, Eric Skiff <glitchc...@gmail.com> wrote:
> >> > 3 for me please, if I'm not too late!
> >> > -E
>
> >> > On Thu, Dec 17, 2009 at 10:20 AM, Nick Vermeer <

> >> nicholas.verm...@gmail.com>

> >> > wrote:
>
> >> >> I'll take two as well.
>

> >> >> On Thu, Dec 17, 2009 at 12:03 AM, Ben Combee <ben.com...@gmail.com>

> >> wrote:
>
> >> >>> On Wed, Dec 16, 2009 at 11:02 PM,  <ad...@babbageengineworks.com>
> >> wrote:
> >> >>> > On Wed, 16 Dec 2009, Ryan Micallef wrote:
>
> >> >>> >> I'm going to buy 5 or 8 of these. Anyone want in on shipping?
>
> >> >>> > Okay, PS and all that.  To make sure the order exceeds the $75 free
> >> >>> > ship
> >> >>> > minimum, I'd like a 3.5V FTDI adapter, too...
>
> >> >>> >http://www.solarbotics.com/products/50512/
>
> >> >>> > After all, got to talk to the adweeny somehow...
>
> >> >>> I'm in for two of the Adweeny boards.
>
> >> >>> --
>
> >> >>> You received this message because you are subscribed to the Google
> >> Groups
> >> >>> "NYCResistor:Microcontrollers" group.
> >> >>> To post to this group, send email to
> >> >>> nycresistormi...@googlegroups.com.
> >> >>> To unsubscribe from this group, send email to

> >> >>> nycresistormicrocon...@googlegroups.com<nycresistormicrocontrollers%2Bunsu...@googlegroups.com>

> >> .
> >> >>> For more options, visit this group at
> >> >>>http://groups.google.com/group/nycresistormicrocontrollers?hl=en.
>
> >> >> --
>
> >> >> You received this message because you are subscribed to the Google
> >> Groups
> >> >> "NYCResistor:Microcontrollers" group.
> >> >> To post to this group, send email to
> >> >> nycresistormi...@googlegroups.com.
> >> >> To unsubscribe from this group, send email to

> >> >> nycresistormicrocon...@googlegroups.com<nycresistormicrocontrollers%2Bunsu...@googlegroups.com>

> >> .
> >> >> For more options, visit this group at
> >> >>http://groups.google.com/group/nycresistormicrocontrollers?hl=en.
>
> >> > --
> >> > Eric Skiff
> >> >http://amplify.com
> >> > 917-284-8124
>
> >> > What I'm Reading:http://rigeekulous.amplify.com| Twitter:
> >> >http://twitter.com/ericskiff| NYC Resistor:http://NYCResistor.com
>
> >> > --
>
> >> > You received this message because you are subscribed to the Google
> >> Groups
> >> > "NYCResistor:Microcontrollers" group.
> >> > To post to this group, send email to
> >> > nycresistormi...@googlegroups.com.
> >> > To unsubscribe from this group, send email to

> >> > nycresistormicrocon...@googlegroups.com<nycresistormicrocontrollers%2Bunsu...@googlegroups.com>

> >> .
> >> > For more options, visit this group at
> >> >http://groups.google.com/group/nycresistormicrocontrollers?hl=en.
>
> >>  --
> >> You received this message because you are subscribed to the Google Groups
> >> "NYCResistor:Microcontrollers" group.
> >> To post to this group, send email to
> >> nycresistormi...@googlegroups.com.
> >> To unsubscribe from this group, send email to

> >> nycresistormicrocon...@googlegroups.com<nycresistormicrocontrollers%2Bunsu...@googlegroups.com>

> >> .
> >> For more options, visit this group at
> >>http://groups.google.com/group/nycresistormicrocontrollers?hl=en.
>
> >  --
> > You received this message because you are subscribed to the Google Groups
> > "NYCResistor:Microcontrollers" group.
> > To post to this group, send email to
> > nycresistormi...@googlegroups.com.
> > To unsubscribe from this group, send email to

> > nycresistormicrocon...@googlegroups.com<nycresistormicrocontrollers%2Bunsu...@googlegroups.com>

[David Neff]

And one more order... thanks for the motivation!

I'll take
 4 + USB 3.5V FTDI adapter = $54

I too can meet up with you Mon at Ibeam if you get them that quickly, my office is a few blocks away, otherwise I'll come to NYCR.

Just let me know Paypal or cash...

Thanks

David Neff
David Neff Photography
www.davepix.com
ne...@davepix.com
212 243-1895
130 7th Ave #123 NY NY 10011
 

To unsubscribe from this group, send email to nycresistormicrocon...@googlegroups.com.

For more options, visit this group at http://groups.google.com/group/nycresistormicrocontrollers?hl=en.

--
David Neff Photography
www.davepix.com
ne...@davepix.com
212 243-1895
130 7th Ave #123 NY NY 10011

[jonatha...@gmail.com]

Is it too late to get in on this? If not, I'll take 9.

Thanks!
j

On Dec 18, 6:50 am, David Neff <davetakespictu...@gmail.com> wrote:
> And one more order... thanks for the motivation!
>
> I'll take
>  4 + USB 3.5V FTDI adapter = $54
>
> I too can meet up with you Mon at Ibeam if you get them that quickly, my
> office is a few blocks away, otherwise I'll come to NYCR.
>
> Just let me know Paypal or cash...
>
> Thanks
>
> David Neff
> David Neff Photographywww.davepix.com

> n...@davepix.com

> > <nycresistormicrocontrollers%2Bunsu...@googlegroups.com<nycresistormicr ocontrollers%252Buns...@googlegroups.com>

>
> > > >> .
> > > >> >>> For more options, visit this group at
> > > >> >>>http://groups.google.com/group/nycresistormicrocontrollers?hl=en.
>
> > > >> >> --
>
> > > >> >> You received this message because you are subscribed to the Google
> > > >> Groups
> > > >> >> "NYCResistor:Microcontrollers" group.
> > > >> >> To post to this group, send email to
> > > >> >> nycresistormi...@googlegroups.com.
> > > >> >> To unsubscribe from this group, send email to
> > > >> >> nycresistormicrocon...@googlegroups.com<nycresistormicroco ntrollers%2Bunsu...@googlegroups.com>

> > <nycresistormicrocontrollers%2Bunsu...@googlegroups.com<nycresistormicr ocontrollers%252Buns...@googlegroups.com>

>
> > > >> .
> > > >> >> For more options, visit this group at
> > > >> >>http://groups.google.com/group/nycresistormicrocontrollers?hl=en.
>
> > > >> > --
> > > >> > Eric Skiff
> > > >> >http://amplify.com
> > > >> > 917-284-8124
>
> > > >> > What I'm Reading:http://rigeekulous.amplify.com|Twitter:

> > > >> >http://twitter.com/ericskiff|<http://twitter.com/ericskiff%7C> NYC

> > Resistor:http://NYCResistor.com
>
> > > >> > --
>
> > > >> > You received this message because you are subscribed to the Google
> > > >> Groups
> > > >> > "NYCResistor:Microcontrollers" group.
> > > >> > To post to this group, send email to
> > > >> > nycresistormi...@googlegroups.com.
> > > >> > To unsubscribe from this group, send email to
> > > >> > nycresistormicrocon...@googlegroups.com<nycresistormicroco ntrollers%2Bunsu...@googlegroups.com>

> > <nycresistormicrocontrollers%2Bunsu...@googlegroups.com<nycresistormicr ocontrollers%252Buns...@googlegroups.com>

>
> > > >> .
> > > >> > For more options, visit this group at
> > > >> >http://groups.google.com/group/nycresistormicrocontrollers?hl=en.
>
> > > >>  --
> > > >> You received this message because you are subscribed to the Google
> > Groups
> > > >> "NYCResistor:Microcontrollers" group.
> > > >> To post to this group, send email to
> > > >> nycresistormi...@googlegroups.com.
> > > >> To unsubscribe from this group, send email to
> > > >> nycresistormicrocon...@googlegroups.com<nycresistormicroco ntrollers%2Bunsu...@googlegroups.com>

> > <nycresistormicrocontrollers%2Bunsu...@googlegroups.com<nycresistormicr ocontrollers%252Buns...@googlegroups.com>

>
> > > >> .
> > > >> For more options, visit this group at
> > > >>http://groups.google.com/group/nycresistormicrocontrollers?hl=en.
>
> > > >  --
> > > > You received this message because you are subscribed to the Google
> > Groups
> > > > "NYCResistor:Microcontrollers" group.
> > > > To post to this group, send email to
> > > > nycresistormi...@googlegroups.com.
> > > > To unsubscribe from this group, send email to
> > > > nycresistormicrocon...@googlegroups.com<nycresistormicroco ntrollers%2Bunsu...@googlegroups.com>

> > <nycresistormicrocontrollers%2Bunsu...@googlegroups.com<nycresistormicr ocontrollers%252Buns...@googlegroups.com>

>
> > > > .
> > > > For more options, visit this group at
> > > >http://groups.google.com/group/nycresistormicrocontrollers?hl=en.
>
> > --
>
> > You received this message because you are subscribed to the Google Groups
> > "NYCResistor:Microcontrollers" group.
> > To post to this group, send email to
> > nycresistormi...@googlegroups.com.
> > To unsubscribe from this group, send email to
> > nycresistormicrocon...@googlegroups.com<nycresistormicroco ntrollers%2Bunsu...@googlegroups.com>
> > .
> > For more options, visit this group at
> >http://groups.google.com/group/nycresistormicrocontrollers?hl=en.
>
> --

> David Neff Photographywww.davepix.com
> n...@davepix.com

[P Leiby]

BTW, if you order > 7.5 Ardweenys, or >75$ stuff, I believe Solarbotics will give free shipping.
Solarbotics actually has a lot of Arduino-related products (including many of LadyAda's). 

(Neither the author nor his family are employed by, or have any financial relation with, Solarbotics!)

To unsubscribe from this group, send email to nycresistormicrocon...@googlegroups.com.

[Ryan Micallef]

Okay.  Order officially closed.

Me: 5 = $50
Ada: 2 + FTDI adapter (3.3V) = $34

Ben: 2 = $20
Nick: 2 = $20
Skiff: 3 = $30
Liz: 8 = $80

Nasir: 2 + FTDI adapter (3.3V) = $34
Mike: 1 + FTDI adapter (5V) = $24
Ananda: 1 = $10
David: 4 + FTDI adapter (3.3V) = $54
Jonathan: 10 = $100
----------------------------------------------------------
Total: 40 Ardweenys (-ies?) + 3 FTDI (3.3V) + 1 FTDI (5V) = $456

Wow.  You guys had better pay up!  :)  I hate giving money to Paypal, but if that's easier, then send money by Paypal to this email address.  I'm doing this totally on the honor system based on emails from people I haven't met.  But I'll have a little faith in my fellow nerds.  Don't make me regret it.

I'll have this shipped direct to Resistor.  I won't be around after Monday to distribute, but I'm sure someone will be there to make sure the box gets into my locker.

Ryan

[dave.gi...@gmail.com]

If it's not to late I'll take 3 and Pay with PayPal, I'll cover the
Pay Pal fee for the convenience.

Thanks
Dave G

> >> ntrollers%2Bunsu...@googlegroups.com<ntrollers%252Buns...@googlegroups.com>
>
> >> > > <nycresistormicrocontrollers%2Bunsu...@googlegroups.com<nycresistormicrocontrollers%252Buns...@googlegroups.com><nycresistormicr
> >> ocontrollers%252Buns...@googlegroups.com<ocontrollers%25252Bun...@googlegroups.com>

>
> >> > > > >> .
> >> > > > >> >>> For more options, visit this group at
>
> >>http://groups.google.com/group/nycresistormicrocontrollers?hl=en.
>
> >> > > > >> >> --
>
> >> > > > >> >> You received this message because you are subscribed to the
> >> Google
> >> > > > >> Groups
> >> > > > >> >> "NYCResistor:Microcontrollers" group.
> >> > > > >> >> To post to this group, send email to
> >> > > > >> >> nycresistormi...@googlegroups.com.
> >> > > > >> >> To unsubscribe from this group, send email to
> >> > > > >> >> nycresistormicrocon...@googlegroups.com<nycresistormicrocontrollers%2Bunsu...@googlegroups.com><nycresistormicroco

> >> ntrollers%2Bunsu...@googlegroups.com<ntrollers%252Buns...@googlegroups.com>
>
> >> > > <nycresistormicrocontrollers%2Bunsu...@googlegroups.com<nycresistormicrocontrollers%252Buns...@googlegroups.com><nycresistormicr
> >> ocontrollers%252Buns...@googlegroups.com<ocontrollers%25252Bun...@googlegroups.com>

>
> >> > > > >> .
> >> > > > >> >> For more options, visit this group at
>
> >>http://groups.google.com/group/nycresistormicrocontrollers?hl=en.
>
> >> > > > >> > --
> >> > > > >> > Eric Skiff
> >> > > > >> >http://amplify.com
> >> > > > >> > 917-284-8124
>
> >> > > > >> > What I'm Reading:http://rigeekulous.amplify.com|Twitter:
> >> > > > >> >http://twitter.com/ericskiff|<http://twitter.com/ericskiff%7C>
> >> <http://twitter.com/ericskiff%7C> NYC
> >> > > Resistor:http://NYCResistor.com
>
> >> > > > >> > --
>
> >> > > > >> > You received this message because you are subscribed to the
> >> Google
> >> > > > >> Groups
> >> > > > >> > "NYCResistor:Microcontrollers" group.
> >> > > > >> > To post to this group, send email to
> >> > > > >> > nycresistormi...@googlegroups.com.
> >> > > > >> > To unsubscribe from this group, send email to
> >> > > > >> > nycresistormicrocon...@googlegroups.com<nycresistormicrocontrollers%2Bunsu...@googlegroups.com><nycresistormicroco

> >> ntrollers%2Bunsu...@googlegroups.com<ntrollers%252Buns...@googlegroups.com>
>
> >> > > <nycresistormicrocontrollers%2Bunsu...@googlegroups.com<nycresistormicrocontrollers%252Buns...@googlegroups.com><nycresistormicr
> >> ocontrollers%252Buns...@googlegroups.com<ocontrollers%25252Bun...@googlegroups.com>

>
> >> > > > >> .
> >> > > > >> > For more options, visit this group at
>
> >>http://groups.google.com/group/nycresistormicrocontrollers?hl=en.
>
> >> > > > >>  --
> >> > > > >> You received this message because you are subscribed to the
> >> Google
> >> > > Groups
> >> > > > >> "NYCResistor:Microcontrollers" group.
> >> > > > >> To post to this group, send email to
> >> > > > >> nycresistormi...@googlegroups.com.
> >> > > > >> To unsubscribe from this group, send email to
> >> > > > >> nycresistormicrocon...@googlegroups.com<nycresistormicrocontrollers%2Bunsu...@googlegroups.com><nycresistormicroco

> >> ntrollers%2Bunsu...@googlegroups.com<ntrollers%252Buns...@googlegroups.com>
>
> >> > > <nycresistormicrocontrollers%2Bunsu...@googlegroups.com<nycresistormicrocontrollers%252Buns...@googlegroups.com><nycresistormicr
> >> ocontrollers%252Buns...@googlegroups.com<ocontrollers%25252Bun...@googlegroups.com>

>
> >> > > > >> .
> >> > > > >> For more options, visit this group at
> >> > > > >>http://groups.google.com/group/nycresistormicrocontrollers?hl=en.
>
> >> > > > >  --
> >> > > > > You received this message because you are subscribed to the Google
> >> > > Groups
> >> > > > > "NYCResistor:Microcontrollers" group.
> >> > > > > To post to this group, send email to
> >> > > > > nycresistormi...@googlegroups.com.
> >> > > > > To unsubscribe from this group, send email to
> >> > > > > nycresistormicrocon...@googlegroups.com<nycresistormicrocontrollers%2Bunsu...@googlegroups.com><nycresistormicroco

> >> ntrollers%2Bunsu...@googlegroups.com<ntrollers%252Buns...@googlegroups.com>
>
> >> > > <nycresistormicrocontrollers%2Bunsu...@googlegroups.com<nycresistormicrocontrollers%252Buns...@googlegroups.com><nycresistormicr
>
> ...
>
> read more »

[Nasir Barday]

Whoa, that's generous of you, Ryan. If it were me, I probably would have stopped it out at $200! It'll take a week or so for these to arrive, yes? Should we all arrange to come to craft night at Resistor when you're around and we can make a pickup? The next two are on Christmas Eve and New Year's-- how's January 7th? I can give you cash that night instead of paying PayPal man.

Can't believe we're putting you through so much just so we don't have to pay for shipping. But at least it's an excuse to come out to the hack space; it's been ages since I took a class there.

Cheers,
- Nasir

To unsubscribe from this group, send email to nycresistormicrocon...@googlegroups.com.

[Denver Gingerich]

On Fri, Dec 18, 2009 at 11:38 AM, Ryan Micallef <mica...@gmail.com> wrote:
> I hate giving money to Paypal, but if
> that's easier, then send money by Paypal to this email address.

PayPal won't steal any of the money if you send the money as a gift
and make sure it's coming from your PayPal balance or bank account and
NOT your credit card (from what I recall). If they do steal some
money, the receiver can refund the full amount (including PayPal's
charges) and then work with the sender to ensure they're sending it
the right way.

Denver
http://ossguy.com/

[Ryan Micallef]

I have it on good information that the Ardweenys and FTDI cards have arrived.  There are no craft nights until next year, so that'll be the first public chance for people to get at them.  I'm back in town on the weekend of 1/1.  If you have an urgent need, email me off list and maybe we can work something out.

Resistors, look in my locker and leave cash or IOUs there for any you take.  I didn't order extras, so please don't take more than you ordered.

I just saw that Dave G. and Matt Cleary asked to get in on the order after it closed.  Sorry, guys.  I had to stop it somewhere, and it was open for a couple of days.

Ryan

--

You received this message because you are subscribed to the Google Groups "NYCResistor:Microcontrollers" group.
To post to this group, send email to nycresistormi...@googlegroups.com.

[Ananda Das]

Thank you Ryan. I'll come on the Jan 7 craft night.

On Dec 23, 5:22 pm, Ryan Micallef <mical...@gmail.com> wrote:
> I have it on good information that the Ardweenys and FTDI cards have
> arrived.  There are no craft nights until next year, so that'll be the first
> public chance for people to get at them.  I'm back in town on the weekend of
> 1/1.  If you have an urgent need, email me off list and maybe we can work
> something out.
>
> Resistors, look in my locker and leave cash or IOUs there for any you take.
> I didn't order extras, so please don't take more than you ordered.
>
> I just saw that Dave G. and Matt Cleary asked to get in on the order after
> it closed.  Sorry, guys.  I had to stop it somewhere, and it was open for a
> couple of days.
>
> Ryan
>

> On Fri, Dec 18, 2009 at 11:52, Denver Gingerich <dwginger...@gmail.com>wrote:
>
> > On Fri, Dec 18, 2009 at 11:38 AM, Ryan Micallef <mical...@gmail.com>

> > wrote:
> > >  I hate giving money to Paypal, but if
> > > that's easier, then send money by Paypal to this email address.
>
> > PayPal won't steal any of the money if you send the money as a gift
> > and make sure it's coming from your PayPal balance or bank account and
> > NOT your credit card (from what I recall).  If they do steal some
> > money, the receiver can refund the full amount (including PayPal's
> > charges) and then work with the sender to ensure they're sending it
> > the right way.
>
> > Denver
> >http://ossguy.com/
>
> > --
>
> > You received this message because you are subscribed to the Google Groups
> > "NYCResistor:Microcontrollers" group.
> > To post to this group, send email to
> > nycresistormi...@googlegroups.com.
> > To unsubscribe from this group, send email to

> > nycresistormicrocon...@googlegroups.com<nycresistormicrocontrollers%2Bunsu...@googlegroups.com>

[dave.gi...@gmail.com]

No worries Ryan I had a feeling I missed the dead line.
Thanks anyway

Dave

On Dec 23, 5:22 pm, Ryan Micallef <mical...@gmail.com> wrote:

> I have it on good information that the Ardweenys and FTDI cards have
> arrived.  There are no craft nights until next year, so that'll be the first
> public chance for people to get at them.  I'm back in town on the weekend of
> 1/1.  If you have an urgent need, email me off list and maybe we can work
> something out.
>
> Resistors, look in my locker and leave cash or IOUs there for any you take.
> I didn't order extras, so please don't take more than you ordered.
>
> I just saw that Dave G. and Matt Cleary asked to get in on the order after
> it closed.  Sorry, guys.  I had to stop it somewhere, and it was open for a
> couple of days.
>
> Ryan
>

> On Fri, Dec 18, 2009 at 11:52, Denver Gingerich <dwginger...@gmail.com>wrote:
>
> > On Fri, Dec 18, 2009 at 11:38 AM, Ryan Micallef <mical...@gmail.com>

> > wrote:
> > >  I hate giving money to Paypal, but if
> > > that's easier, then send money by Paypal to this email address.
>
> > PayPal won't steal any of the money if you send the money as a gift
> > and make sure it's coming from your PayPal balance or bank account and
> > NOT your credit card (from what I recall).  If they do steal some
> > money, the receiver can refund the full amount (including PayPal's
> > charges) and then work with the sender to ensure they're sending it
> > the right way.
>
> > Denver
> >http://ossguy.com/
>
> > --
>
> > You received this message because you are subscribed to the Google Groups
> > "NYCResistor:Microcontrollers" group.
> > To post to this group, send email to
> > nycresistormi...@googlegroups.com.
> > To unsubscribe from this group, send email to

> > nycresistormicrocon...@googlegroups.com<nycresistormicrocontrollers%2Bunsu...@googlegroups.com>

[Ryan Micallef]

Okay.  At risk of tempting the bitch goddess Disaster, I'm planning to be at Craft Night tomorrow for anyone who wants to pick up their stuff.  Having said that, I will now get swamped with work tomorrow. 

But let's pretend I'll be there around 7-9.  I'll be the guy in the collared shirt and slacks looking like a nerd lawyer in a room full of proper nerds.  Also, I have a red beard.  A few of you have paypal'd me already (Thanks!).  The rest of you can paypal me or bring cash tomorrow as listed below.

Ryan

[Nasir Barday]

I'm coming to craft night tomorrow. Will bring cash or PayPal you beforehand. See you then!

- Nasir