Wamp 2.5 Free Download

[Tisham Candella]

Firstof all, I read at least 20 articles about this topic, and not one of them can match up the scenario and I screwed up the process numerous times. So I turn help by offering my specific scenario if any help will be appreciated.

This however tells Apache it can accept connections from any ip address in the universe. That's not a problem as long as you have not port forwarded port 80 on your router, or never ever will attempt to in the future.

In WAMPServer 3 there is a Virtual Host defined by default. Therefore the above suggestions do not work. You no longer need to make ANY amendments to the httpd.conf file. You should leave it exactly as you find it.

Great! The next step is to open port (8081) of the server such that everyone can access your server. This depends on which OS you are using. Like if you are using Windows Vista, then follow the below steps.

Update If any device in the LAN uses VPN, and DNS server address is set at the router, DNS server approach will not work for those devices. You have to set DNS record in the host file!

This set-up works with every Win PC, tablet/phone, and Win VMs on VMWare. Strangely, it doesn't work with Ubuntu 20.04 (on VMWare and on Raspberry PI4B). I guess I have to learn how to set-up DNS on Ubuntu!

I have several computers on a home router and I have been working on some projects for myself. Well, I wanted to see what it looked like on my mobil devices. But WAMP was set so I could only get on from the development system. So I began looking around and found this article as well as some others. The problem is - none of them worked for me. So I was left to figure this out on my own.

The above says that any device that is on your router (the '78' is just an arbitrary number picked for this solution. It should be whatever your router is set up for. So it might be 192.168.1 or 192.168.0 or even 192.168.254 - you have to look it up on your router.) can now access your server.

The above did NOT do anything for me - at first. There is more you need to do. But first - what you do NOT need to do. You do NOT need to change the WAMP setting from Offline to Online. FOR ME - changing that setting doesn't do anything. Unknown why - it just doesn't. So change it if you want - but I don't think it needs to be changed.

Note: In case you do not know how to bring up a command window - you click on Start, select the "Run" option, and type "cmd.exe" in to the dialog box without the quotes. On newer systems (since they keep changing everything) it might be the white windows icon or the circle or Bill Gates jumping up and down. Whatever it is - click on it.

Finally - why? Why do you have to change the Listen command? It has to do with localhost. 'localhost' is set to 127.0.0.1 and NOT your IP address by default. This can be found in your host file which is usually found in the system32 folder under Windows but probably has been moved by Microsoft to somewhere else. Look it up online for where it is and go look at it. If you see a lot of sex, porn, etc sites in your localhost host file - you need to get rid of them (unless that is your thing). I suggest RogueKiller (at AdLice.com) be used to take a look at your system because it can reset your host file for you.

If your host file is normal though - it should contain just one entry and that entry is to set localhost to 127.0.0.1. That is why using localhost in the httpd.conf file makes it so you only can work on everything and see everything from your server computer.

You MAY have to change your TCP/IP address. (Mine is already set up so I didn't need to do this.) You will need to look up for your OS how to get to where your TCP/IP address is defined. Under Windows XP this was Control Panel->Network Connections. This has changed in later OSs so you have to look up how to get there. Anyway, once there you will see your Wireless Network Connection or Local Area Connection (Windows). Basically WIFI or Ethernet cable. Select the one that is active and in use. Under Windows you then right-click and select Properties. A dialog should pop-up and you should see a list of checkboxes with what they are to the side. Look for the one that is for TCP/IP. There should be one that says TCP/IP v4. Select it. (If there isn't one - you should proceed with caution.) Click the Properties button and you should get another dialog box. This one shows either "Obtain an IP address automatically" or "Use the following IP address" selected. If it is the first one then you have to change it to the second one. BUT BEFORE YOU DO THAT - bring up a command window and type in the ipcongfig/all command so you have, right there in front of you, what your default gateway is. Then change it from "Obtain..." to "Use...". Where it says "IP address" put in the IP address you want to always use. This is the IP address you put in on the Listen command above. The second line (Subnet mask) usually is 255.255.255.0 meaning only the last number (ie: 0) changes. Then, looking back at the command window put in your default gateway. Last, but not least, when you changed from "Obtain..." to "Use..." the DNS settings may have changed. If the section which deals with DNS settings has changed to "Use..." and it is blank - the answer is simple. Just look at that ipconfig/all output, find the DNS setting(s) there and put them in to the fields provided. Once done click the OK button and then click the second OK button. Once the dialog closes you may have to reboot your system for the changes to take effect. Try it out by going to Google or Stack Overflow. If you can still go places - then no reboot is required. Otherwise, reboot. Remember! If you can't get on the internet afterwards all you do is go back and reset everything to the "Obtain..." option. The most likely reason, after making the changes, that you can no longer get on the internet is because the TCP/IP address you chose to use is already in use by the router. The saying "There can be only one" goes for TCP/IP addresses too. This is why I always pick a high one-hundreds number or a low two-hundreds number. Because most DHCP set ups use numbers less than fifty. So in this way you don't collide with someone else's TCP/IP number.

then lot of adresses show-up , then you have just to take the first one , it's look like this example: Adresse IPv4. . . . . . . . . . . . . .: 192.168.67.190well done ! , that's the adresse, that you will use to cennecte to your wampserver in local.

Your "Deny From All" is what's causing the 403 error. The setup you post is used to prevent all traffic, with the intention of later allowing specific traffic. If you never allow specific traffic, you'll never get it to work.

first of allPort 80 and 443 must be allow for both TCP and UDP packets. To do this, create 2 inbound rules for TPC and UDP on Windows Firewall for port 80 and 443.(or you can disable your whole firewall for testing but permanent solution if allow inbound rule)

Hopefully you will have created a Virtual Host for your project and not be using the wamp\www folder for your site. In that case leave the localhost definition alone and make the change only to your Virtual Host.

What I found worked for me after starting WAMP was, left clicking the WAMP icon that appears on the Taskbar, then clicking Start All Services under the Quick Admin. I was then able to access localhost using IE. I even went back to the httpd.config file and set it back to it's defaults.

I recently installed WAMP, changed no settings, and now it is starting whenever I log in. Unlike most other questions I found on SE/Google, I would like it to only start when I run a file (wampmanager.exe or something else?). Is this possible, and how would I set it up (Windows 10, WAMP 3.06 64bit)

My computer is on automatic update from Microsoft. I think thats where the problem came from. My computer downloaded an application from Microsoft and I installed it without knowing it would cause this problem. I have even done a system restore to a former date but the problem still persists. I am trying to find out how I can find out the ports on windows xp and disable the one sharing with wamp. Thank you all help is greatly appreciated

I've reinstalled wamp,upgrading from 2.2 to 2.5 in the process, and now I can't get past the home page on any processwire site on localhost - including the basic skyscraper site. That includes getting to the admin site with localhost:81/myprocesswire/processwire. Any page other than the home page returns me to the wampserver home page, with the url of the desired page in the address bar of the browser ie :81/process_skyscraper/cities/ displays the wamp home page. Apache is working fine for other sites (eg joomla). The difference seems to be the trailing slash at the end of the url.

Some googling came up with WAMPServer 2.5 The Homepage, Your Projects Menu and the need for Virtual Hosts , and I followed the advice on that site to setup a virtual host for a processwire site. It also seems to me to be a relatively complex process - (1) editing httpd-hosts.conf (2) running notepad as administrator to edit C:\windows\system32\drivers\etc\hosts (3) running command prompt as administrator to restart dnscache . It doesn't seem to have made any difference. I tried DocumentRoot with and without the trailing slash in the VirtualHost settings.

I do think setting up virtual hosts (in most cases) is a good practice and there really isn't that much to it. However, it seems you have your VirtualHost setup wrong. Localhost will already be defined by wampserver and probably has precedence over your vhost entry, hence localhost shows the wampserver startpage. I'll show and example of a working VirtualHost entry:

3a8082e126