Nokia X1 Display Light Jumper
Baba Flores
You may need to trace the connection line tracks, supply voltages and check some of the backlight LED driver components shown on the solution above. You may start to check the highlighted components for it is more prone to be easily damaged when a short circuit occurred. Check and replace if already found damaged.
Solution for Nokia 105 Not working LCD display backlight LED White Display Problem
Check the pin connector assembly and ensure to clean it as well.
Check the display filter resistors including the LCD supply voltage and trace the connection tracks to the LCD pin connector. Replace the damaged resistor or mind to reconnect if there is an open line paths.
Note: Every repairing solution posted here is tested by at least one member of our team. Use the information available here at Your Own Risk. We are not responsible if any harm comes to your device during the repairing process.
Nokia 105 RM-1133 LCD Display Light IC Solution Jumper Problem Ways LCD Display Light Not Working
Nokia 105 RM-1133,LCD Display Light Ways,Display Light Problem,Display Light Solution,Display Light Jumper
There are several reasons why your mobile phone LED light may not be working. It could be due to a software issue, a hardware problem, or a setting that needs to be adjusted. Try restarting your phone, checking the LED settings, and if the problem persists, consider taking it to a professional for repair.
If your mobile phone LED light keeps flashing on and off, it could be due to a problem with the LED settings or a hardware issue. Try adjusting the LED settings in your phone's settings menu, and if that doesn't work, consider taking it to a professional for repair.
If your mobile phone LED light is too dim, it could be due to a low battery, a setting that needs to be adjusted, or a problem with the LED itself. Try adjusting the LED settings in your phone's settings menu, and if that doesn't work, consider replacing the LED or taking it to a professional for repair.
Yes, it is possible to replace your mobile phone LED light. However, it is a delicate process that should only be attempted by a professional. Attempting to replace the LED yourself could result in further damage to your phone.
To prevent your mobile phone LED light from getting damaged, avoid dropping your phone or exposing it to extreme temperatures. Also, be careful not to scratch the lens of the LED, as this can affect its performance. Finally, be sure to keep your phone in a protective case to minimize the risk of damage.
Sir, my itel 2160 keypad backlight is not working, making it difficult to use at night. And if I make calls with my itel 2160 it will show caller number hidden (unknown caller), how do I resolved them. Thanks
Itel p33 plus backlight issues
Am a phone technician I have changed all the necessary requirements on light sections still light is not coming on
I got a new screen
I checked the track from the diode on light section on pcb to the light on lcd its is connected
I replaced the light ic, coil and diode and its reading fine but light is still off.
Pls what do i do??
Hlo sir i want to know that i unfortunately put the screen pin from wrong way to test it as I ordered it from online and now it is damged so I again changed it and buyed new but it is not working what is the fault is it on mobile and how to fix. The screen is working on another mobile. Mobile xiaomi mi a1.
good morning sir,I have a phone Ginoee m3 mini it fail inside water and refuse to on so I wash the motherboard and dry it with sun then it on but the led is not displaying light but i can see the writtinge on the screen but is dark no light please help me how can I fix it
I have moto e 4 plus it has an issue . My baby dropped phone in water now my phone display is not showing but every thing working like ringing. Vabratio. Touch vibration and i contracted with phone tech. and he said phone light IC problem so phone light IC problem can be resolve or not
Check the Board Properly with IPA or Alcohol. Apply some Good Quality Liquid Flux on the Board and Give some Hot Air from some Distance. The LEDs that provide Light to the Display may have shorted. They can be easily Replaced.
Sir amar nam holo Bapi.
amar ekta mobile mobiler nam holo lava Iris 402 lcd pblm .
to amar lcd nasto haye jabar pare ami sei lcd take change kare diye jakhan amar hanset take on karchi takhan amar mobiler handset er white haye jachhe to ekhn ami ki karbo to setake ki vabe thik karbo
plz sir help me
Sir,my name is Suraj. I have a mi mobile. One day it fall in water. So it was off. I took it to the service center but they told me change all motherboard. Then I gave it to my friend. He told me that only display light does not work. Because the IC is damaged. He returned my mobile. So please sir tell me what I do,because the center did not give proper solution.
Disassemble the Phone and clean the motherboard, all the connector and all soldering points with IPA using a Brush. You can buy IPA Solution and any Shop where they sell mobile phone parts. Clean properly everything and allow the IPA to Evaporate and dry up. Assemble back and check. Give a boost to the battery using a battery booster if required. I think it will start working.
Dear
I have a micromax tab p650. The battery current backflows to charger when connected. The charger LED glows even thpugh the charger supply is off. Please advice a remedy. Also advice on what if the problem is not attended !
Thanks!