PXE install issues on new DPs

[Heaton, Joseph@Wildlife]

I’ve been working through a project to replace all my secondary sites with Distribution Points.  It’s been going fine, but these last 3 that I’ve setup, using the same process as all the rest, are giving me fits, in regards to PXE.  I’m choosing to set them up without WDS, so the images are placed in SMS_DP$\sms\bin\.  At least, normally.  With these last 3, the PXE folders just never show up.  I can’t find anything in any logs that I’ve looked at, but with the multitude of logs for SCCM, I’m not sure what log, exactly, I should be looking in.  If I look in my SCCM Console, under Monitoring – Distribution Status – Distribution Point Configuration Status, then on the Details tab for a specific DP, the only entry regarding PXE is that it was enabled, successfully.  I thought that maybe it was just taking a long time, so I’ve left this one for 3 days now, and the folders haven’t appeared.  I’m thinking of unchecking the PXE option, letting that sit for a couple of hours, then recheck it, to see if that shakes anything up, but this is a bit odd.

 

As always, any help, tips, suggestions would be greatly appreciated, as I continue to Google, and hope I come across something helpful.

 

Thanks,

 

Joe Heaton

Managed Services and Operational Support Unit

Information Technology Operations Branch

Data and Technology Division

CA Department of Fish and Wildlife

1700 9^th Street, 3^rd Floor

Sacramento, CA  95811

Desk:  916-919-5816

 

[Heaton, Joseph@Wildlife]

Please disregard my last post.  Apparently, it just needed a little more time.  Showed up this morning, about an hour after posting.

 

From: ntsyste...@googlegroups.com <ntsyste...@googlegroups.com> On Behalf Of Heaton, Joseph@Wildlife
Sent: Friday, August 13, 2021 7:22 AM
To: ntsyste...@googlegroups.com
Subject: [ntsystemcenter] PXE install issues on new DPs

 

WARNING: This message is from an external source. Verify the sender and exercise caution when clicking links or opening attachments.

 

--
You received this message because you are subscribed to the Google Groups "ntsystemcenter" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ntsystemcente...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/ntsystemcenter/SJ0PR09MB6686A84FCADFAB2CCA1DF1AAAAFA9%40SJ0PR09MB6686.namprd09.prod.outlook.com.