Iso 16028 Parker

[Salvador Baltimore]

CEJNX-Series is a Flat-Face quick-connect coupling according to and exceeding the ISO 16028 Standard for low and medium-pressure hydraulic applications. The Flat-Face design minimizes spillage during connection and disconnection. X-Series couplings require only one hand for operation, making the connection and disconnection fast and easy. Dust caps are available as accessories for both the coupling and nipple when disconnected to prevent dust and debris from entering the system. X-Series couplings feature manual security locking as added protection against involuntary disconnection.

The FEM, FEC and IF series plug profile are produced according to ISO Standard 16028 and are compatible with other series complying with the same standard. These couplings offer a leckage free disconnection - minimal oil loss during uncoupling. Thanks to the valve design, the coupling has a minimum pressure drop, and thus achieves maximum cost-effectiveness. Exists in standard version (steel) and stainless steel.

1/2" JIC bulkhead Skid-Steer loader hydraulic quick coupler set. ISO 16028 interchange for universal interchangeability. These couplers interchange with Parker FE-501-8FP, or FEM-501-8FP and FE-502-8FP, or FEM-502-8FP. This is a high-flow coupler it is compatible with a variety models of Skid Steer loaders which includes but not limited to Bobcat, Mustang, John Deere, Kubota, Caterpillar, Takeuchi, Volvo, New Holland, and more.

This is the only true connect under pressure hydraulic nipple. With as much as 2500 PSI residual line pressure you can now connect your couplers by hand! Simply replace your current hydraulic plug with our new replacement plug and eliminate thermal expansion problems. The mating coupler will need to be without pressure. High quality "Stucchi" couplers made in Italy.

Bezodkapov rychlospojky Parker - srie FEM jsou vyrobeny dle standardu ISO 16028 a jsou komptibiln s rychlospojkami ostatnch vrobců vyrobenmi tž dle tohoto standardu. Svou konstrukc umožňuj obsluhu jednou rukou, jsou vybaveny bezpečnostn pojistkou na objmce proti nechtěnmu rozpojen, zroveň zaručuj minimln ztrty oleje při spojovn a rozpojovn, často se tak nazvaj jako "ekologick". Vyrb se z vysokopevnostn pozinkovan oceli s vnitřnmi palcovmi připojovacmi zvity (od velikosti 1/8" do 1"). Standardně se dodvaj s těsněnm NBR, na vyždn možnost FKM/PUR/EPDM.

Technick data:

Este acople se fabrica bajo la Norma ISO 16028 y es intercambiable con otras marcas manufacturadas de acuerdo a esta Norma. Tiene un sistema de valvula tipo _ara Plana_ Es de diseno compacto y facil de usar, Se utiliza en aplicaciones hidraulicas de alto rendimiento donde es necesaria la eliminacion de perdidas de fluido y la contaminacion del circuito. Principales aplicaciones en agricultura, maquinaria movil. herramientas hidraulicas y equipos industriales. Fabricado en Acero Carbono zincado, con sellos de NBR. Conexiones NPT desde 1/4 a 1.1/4 pulgada Presion de trabajo: Entre 350 y 500 BAR dependiendo del tamano. Temperatura de trabajo: -30 a 100 C No se debe conectar o desconectar con presion en el circuito

3a8082e126