standard change in wifi-aggregation example

[Nina]

I want to change wifi standard in wifi-aggregation example from n to ax but I wasn't successful. In pcap file I see that the standard is 11a, which means that for some reason the ns-3 sees my change as something undefined (standard unset) and goes to default 11a. I can not find the reason. If you have time, I will post file that I changed. I changed the interval for packet sending so the simulation will run faster (so I can see pcap files sooner) but that is not important now, I have marked the changes I made with 'added' note.

Nina

[Nina]

I would like to add that I enabled pcap tracing in he-wifi-network example and pcap file shows 11n standard. It also shows channel width to be 20Mhz even though i changed channel width to fixed 160Mhz. Does anyone know why pcap file shows this? This is a few lines from the file:

10.999627 10999627us tsft MCS 11 5210 MHz 11n 52.0 Mb/s MCS 11 20 MHz long GI mixed BCC FEC RX-STBC0 IP 192.168.1.2.49153 > 192.168.1.1.9: UDP, length 1472
10.999638 10999638us tsft MCS 11 5210 MHz 11n 52.0 Mb/s MCS 11 20 MHz long GI mixed BCC FEC RX-STBC0 IP 192.168.1.2.49153 > 192.168.1.1.9: UDP, length 1472
10.999648 10999648us tsft MCS 11 5210 MHz 11n 52.0 Mb/s MCS 11 20 MHz long GI mixed BCC FEC RX-STBC0 IP 192.168.1.2.49153 > 192.168.1.1.9: UDP, length 1472

I will attach the he-wifi-network example that I used. I would appreciate any help.

[Lunodzo Mwinuka]

I need help with this too.