Ethernet Port Driver Update

[Rachal Langwith]

OpenDevice Manager and find the category you need from the list (this could be under something like "Internet" or "LAN"). Right-click on the list item for your ethernet and select Update Driver from the drop-down menu. If Windows is unable to find a driver update, check the ethernet card manufacturer's website to see if they have a new driver you can manually download.

Download the necessary drivers using a computer that does have an internet connection, then transfer the driver files to another form of media you can use on the disconnected computer (for example, a USB flash drive). Next, connect the media with the drivers to the disconnected computer and copy them over. Then double-click the driver files that have been copied to your disconnected computer to begin the installation process, and follow the prompts.

I tried updating everything, even setting the negotiation manually to 1GB and 2.5GB with full duplex, still nothing, won't go up faster than 100mb/s, I'm using a cat6e cable so that's not the issue, my other computers on the same LAN are at 600mb/s and even with the wi-fi on any phone I can get up to 250mb/s so it's clearly an issue with the Ethernet controller/HW.

Could you please provide me any solution to this issue?

I would hate to have to dissasemble my build and have to send back the motherboard just for the Ethernet card, as I do not plan to buy an extra PCIe Ethernet card just because I got some faulty Hardware...

To set your expectations, the end result may lead to us referring you to the Asus support team since the built-in ethernet controller on your system, has been customized by Asus: firmware customized, driver customized.

1. Based on the error that you received, you could be limited by the port on the router. Given that one computer via LAN is working okay, have you tried connecting it on the same port where that computer is connected to? Please also try the cable used on that machine if possible.

We need to close this thread since we have not gotten a response from you: maybe because you are busy or preoccupied at the moment. We know that this is important for you to get it resolved and it is also equally important for us to give you the right solution; as much as we would like to assist you, we need to close it to attend to other customers. We hope for your consideration and understanding on this one.

I can pickup where Nil0r left off as I just purchased an ASUS ROG Strix B550-A Gaming motherboard with the I225-V network card and I'm experiencing the same issues. I have tried the previous suggestions and still yielded the same results of 100Mbps being my throughput cap. Please advice.

Can anyone tell me WTF Intel is still selling garbage broken network adapters?? This problem has been going on for over a year and still after a myriad of issues this trash product is still being sold!!??? I just bought a new Asus TUF Z690 and now I experience trash download speeds, speedtest is fine but downloads from Nvidia or other places my X570 board Asus Hero board had ZERO issues this garbage network adapter downloads from 2mbyte to maybe10 MAX. Some downloads are fine others are not. THIS IS A TRASH PRODUCT since it's a problem that has been existing for a very long time, why are you keep selling customers trash??

Hi, MSI PRO Z690-A WIFI motherboard user here...

Same problem occurs on my brand new motherboard too. I've build 12900K and DDR5 system for office but I can't even connect office's LAN network... Capping adapter's speed to 100mbps Full Duplex from PROSet Adapter Configuration Utility with latest driver (1.0.2.14) is working but this speed is literally from 15 years early

Intel says ethernet controller can handle 2.5 Gbps but in realty we are getting 0.1 Gbps; it is just funny.

This problem has existed since the internet controller was released, and since it appears on different motherboards from different manufacturers with different chipsets, different configurations of computers connected to different routers with different cables, there must be a problem with the internet controller itself. Since different drivers haven't solved the problem for years, maybe there is a physical problem.

I managed to solve my problem by inserting an extra unnecessary switch. So, remembering that the computer was in an office environment, I first connected the LAN cable coming from the computer to an unnecessary switch to which no other device was connected, then to the general switch of the office, and then to the modem.

At first the problem was not solved, but after unplugging it again, we have been able to get full speed without any problems for 2 years. I have no idea why it solved the problem, but you know, if it works, it's not stupid.

I'm sure there's something wrong with this controller itself, but for some reason, it's surprising that the controller, which is so widely used on so many motherboards, doesn't receive proper support from Intel.

Have a nice life, man! cya.

I did run into this issue after installing the latest drivers, and suddenly I had max 100 Mb/s speeds, I fixed it by completely uninstalling the device and it's drivers (after uninstalling and restarting pc it worked automatically), however I installed drivers again but now not the latest one but second to latest and for now I don't see the issue in this driver. I did that because before all that I had a problem when from time to time I was having DNS errors that forced me to restart my network card to even load any website, and it stopped after downloading latest drivers, but this issue appeared hopefully it's also fixed with drivers I installed now and everything will work as should from beginning.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

Another option if you are using a s7300 PLC is to use an Ethernet/profinet module such as the 343-1 lean module. This fits on to the rack and gives you Ethernet connections to the PLC and direct addressing for your ignition program.

I am trying to using the Hilscher MPI Converter to connect to a Siemens S7 315-2dp and it doesnt seem to be working. I was expecting it to work straight away but i think i need to change the settings in the driver.

I finally managed to solve it with a firmware update on the hilscher unit, i was using an old NL-150 unit that i normally use for programming siemens PLC and the firmware was from v2.00 and way back from 2009. The minute i updated the firmware it connected and started working. Apparently V2.00 only supports PLC programming ???

Its relatively simple to update / identify the firmware. You need to have the latest version of the S7 IBHnet configuration tool, i think you are already using this for configuring the unit for programming.

Once connected to the configuration tool, it will show the current version and allow to update the firmware.

You cannot use it for programming and connectivity to ignition at the same time, also make sure the rack /slot parameters are correct. If you need screenshots of the steps let me know, i will be happy to help.

I got the latest IBHnet config tool, updated the firmware (was on 2.00) and it just worked then with no further changes. Thanks for the tips.

Does this mean I need to disconnect Ignition if I need to make program changes ?

My ethernet port has an error 10 and will not accept a driver update. A repairman mentioned two options, the power supply 460w was too low and/or do a clean install of windows 7. I see an open port - add an ethernet card? The Wireless ethernet works so I can function. Just prefer the ethernet speed. Problem occurred when I tried to update to Windows 10 and it locked up the PC. Reloaded Windows 7 and the computer came back less the ethernet port.

I download the driver and it says it is in c:user/rick/downloads/ethernet. When I double click the ethernet controller on the Device Manager pauses for 20 secounds or so and pops up the message "Error getting the adaptor info". When I right click the ethernet adapter in the Device Manager and try to upload changes it says the latest drives are installed. The Device Manager notes a yellow triangle with an exclamation point. Under properties in says "This device cannot start. (Code 10)" When I right click the device mangager ethernet line it offers "Update Driver". I tried that but when I drill to the ethernet directory it does not show that it exists. It's like it is hiddened. Could the adapter just be bad and I buy another one to put in the remaining open slot? All suggestions are appreciated.

I upgraded my machine (after a lot of pain) to windows 10. My wireless adapter seems to be working correctly, although the signal in the room is too poor to use the internet via wifi, but the ethernet adapter is not displayed in device manager and I cannot use the ethernet connection.

I tried using the disk that came with the motherboard, but before even attempting any installation of drivers it says that the OS is not supported. The website for my motherboard does not list any drivers for windows 10 (bigfoot LAN seems to be what I am looking for).

I tried using the windows 7 driver: it gets all the way through installation - the adapter temporarily appears in device manager - but right at the end, when it is "registering product", it says a fatal error has occurred and appears to revert the changes.

The update notification said I was eligible for windows 10. However, I cannot find my motherboard here, and although the gigabyte microsite says "the drivers and BIOS on all current GIGABYTE motherboards are ready and optimized for Windows 10", my motherboard is not displayed on the website.

3a8082e126