Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
config issues
1 view
Skip to first unread message
jbo...@dcsllc.com
Jan 31, 2004, 3:25:37 PM1/31/04
to
I have a 4.11 server that is on a queue based system. I just added a 6.0
server with a NDPS system. The queue based system works fine but the ndps
system I only have 4 out of the 6 printers working. The two giving me
issues are iR330 and an iR550. They setup fine with the right driver but
when i go to print from themI get a user intervention required response
and check it out to see an I/O error for both. Could it be because they
are still attached to the 4.11 server? If anyone has any ideas how to fix
this it would be much appreciated.
server with a NDPS system. The queue based system works fine but the ndps
system I only have 4 out of the 6 printers working. The two giving me
issues are iR330 and an iR550. They setup fine with the right driver but
when i go to print from themI get a user intervention required response
and check it out to see an I/O error for both. Could it be because they
are still attached to the 4.11 server? If anyone has any ideas how to fix
this it would be much appreciated.
Thanks
John Boucek
Keith Larson
Jan 31, 2004, 4:30:09 PM1/31/04
to
I don't know if this is the
issue, but I had a real hard time with an ir550 and found that it only worked
when I used a postscript printer driver. the pcl driver from canon would
not print to it.
>>> <jbo...@dcsllc.com> 1/31/2004 3:25:37 PM >>>
>>> <jbo...@dcsllc.com> 1/31/2004 3:25:37 PM >>>
0 new messages