FTP Server 2nd interface can't find route

[Mike Murphy<mcmurphy@cdcfcu.com>]

Netware 6 w/ SP3; NWFTPD.NLM V5.03.12 2/12/2003.  Server has 2 interfaces, on different subnets.  I have 2 executions configured, one with each interface.  One interface is internal to a private subnet, it works OK.  The other interface is on the DMZ with a public address.  I can FTP to the server from internal and from the DMZ subnet, but not from the Internet through BorderManager - connection attempts time out.  I have a Netware 4 FTP doing exactly this, on the same 2 subnets, it works within and from the Internet.  I have the same filters configured, I do a SET TCP IP DEBUG on the firewall, I see it pass packets in to the FTP server, nothing comes back.  From the FTP server console I do a IPTRACE to the address on the subnet, it finds that address right away.  I do an IPTRACE to the address on the Internet, it times out, gets nowhere.  But I can run NSLOOKUP on this server, it will resolve internet host names all day long.  I have GWIA running on this server, it's Install warned me it would not be able to resolve, but it does resolve, and work.  Default route for both the 4 FTP and the 6 FTP is the DMZ interface on the firewall, as it should be.  So why can't FTP find it's way back to the Internet when GWIA can?    

[Mike Murphy<mcmurphy@cdcfcu.com>]

Never mind.  One  look at the routing table in TCPCON told me where it was being led astray.

>>> Mike Murphy<mcmu...@cdcfcu.com><MIKEM.MISDEPTPO.CDCFEDERALCREDITUNION> 10/14/03 03:39PM >>>