Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
SCSI settings for DAT drive
2 views
Skip to first unread message
Chip Reinhardt
Jan 26, 2004, 3:03:28 PM1/26/04
to
I have a 12/24 GB DAT DDS-3 drive (reports itself as Archive Python
4016) running BE9.0 on a NW6 SBS server. The drive is the only SCSI
device connected to an Adaptec 2940UW controller. My question - what
are the preferred/recommended settings in SCSI Select for Sync
Negotation (Enabled or Disabled?) and for Data Transfer Rate (up to
40MB/Sec).
4016) running BE9.0 on a NW6 SBS server. The drive is the only SCSI
device connected to an Adaptec 2940UW controller. My question - what
are the preferred/recommended settings in SCSI Select for Sync
Negotation (Enabled or Disabled?) and for Data Transfer Rate (up to
40MB/Sec).
Thanks for any help.
Chip Reinhardt
Barry Schnur
Jan 26, 2004, 3:25:06 PM1/26/04
to
for the BIOS), that will drop the max transfer rate to 20M -- drop that to
6.66 for a DDS-3 device.
--
Barry Schnur
Novell Support Connection Volunteer Sysop
0 new messages