Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
Questions about configuring and activating Server Health E-Mail notification
0 views
Skip to first unread message
sco...@clackamas.edu
Jan 21, 2004, 12:31:20 PM1/21/04
to
Hello,
I am a MCNE, and a NetWare 6 CNE, but yet I have not had luck getting
NetWare Management Portal (NW 5.x), or NetWare Remote Manager (NW 6.x),
to email me or others when thresholds are reached on Server Health. So I
could use some help configuring the Mail Notification Control Panel. Is
there a TID or Documentation link someone can point me to that will help
me properly configure mail notification of Novell server health? I have
simply filled in the primary and alternate mail server addresses and the
notified email addresses in the Mail Notification Control Panel in
NetWare Management Portal, but nothing was ever sent by email. I have
made sure that the threshold configuration were properly set.
I am a MCNE, and a NetWare 6 CNE, but yet I have not had luck getting
NetWare Management Portal (NW 5.x), or NetWare Remote Manager (NW 6.x),
to email me or others when thresholds are reached on Server Health. So I
could use some help configuring the Mail Notification Control Panel. Is
there a TID or Documentation link someone can point me to that will help
me properly configure mail notification of Novell server health? I have
simply filled in the primary and alternate mail server addresses and the
notified email addresses in the Mail Notification Control Panel in
NetWare Management Portal, but nothing was ever sent by email. I have
made sure that the threshold configuration were properly set.
Thanks in advance.
J. Scott Branscum
sco...@clackamas.edu
Kai Reichert
Jan 22, 2004, 11:24:14 AM1/22/04
to
Hi
You have to fill in the SMTP address with DNS, no ip address. This is
the most common reason why it fails.
Sometimes I have seen that problem due to registry corruptions and the
registry had to be deleted.
Which service packs are you on ?
You have to fill in the SMTP address with DNS, no ip address. This is
the most common reason why it fails.
Sometimes I have seen that problem due to registry corruptions and the
registry had to be deleted.
Which service packs are you on ?
--
Regards, Kai Reichert
Novell Support Forums Sysop
People who claim that computers will make life easier for us have
obviously never used one.
sco...@clackamas.edu
Jan 22, 2004, 5:48:51 PM1/22/04
to
Hello,
I am using NW5.1 with SP5 on 16 servers, NW5.1 with SP6 on another, and
NW6 SP3 on the 18th server in the Tree. The NW6 SP3 server contains
master copy of all four replicas, and is the DA server and client
authentication server.
Are you talking of a Netware registry corruption? And how would you fix
that?
Thanks,
Scott
I am using NW5.1 with SP5 on 16 servers, NW5.1 with SP6 on another, and
NW6 SP3 on the 18th server in the Tree. The NW6 SP3 server contains
master copy of all four replicas, and is the DA server and client
authentication server.
Are you talking of a Netware registry corruption? And how would you fix
that?
Thanks,
Scott
Kai Reichert
Jan 22, 2004, 6:29:43 PM1/22/04
to
Scott,
in the mail configuration, you need to specify the address where to
send the mail and the mail server name. For the mail server only dns
names will work, no IP address.
Make sure you are using a valid mail address in the Notification List.
Does it still fail ?
in the mail configuration, you need to specify the address where to
send the mail and the mail server name. For the mail server only dns
names will work, no IP address.
Make sure you are using a valid mail address in the Notification List.
Does it still fail ?
--
Regards, Kai Reichert
Novell Support Forums Sysop
Programming today is a race between software engineers striving to
build bigger and better idiot-proof programs, and the Universe trying
to produce bigger and better idiots. So far, the Universe is winning.
0 new messages