Groups

Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.

Dismiss

novell.support.os.server.netware4x.install-upgrade

1–30 of 3098

0 selected

J...@webpolar.com, Barry Schnur2

2/2/04

recover server from tape backup

Jay, if you can afford it, you might take a look at the Portlock Software products -- it would

unread,

recover server from tape backup

Jay, if you can afford it, you might take a look at the Portlock Software products -- it would

2/2/04

Andy Thompson (SysOp), Mary M2

2/2/04

Will the Zenworks starter pack work with 4.10 or do you need a later version of Netware? Thanks

unread,

Will the Zenworks starter pack work with 4.10 or do you need a later version of Netware? Thanks

2/2/04

djho...@orange.net, … Barry Schnur4

2/2/04

XP Client connects, drives appear then become "not accessible"

> Where can I download 4.83SP2 client ? > http://www.novell.com/coolsolutions/tools/1764.html

unread,

XP Client connects, drives appear then become "not accessible"

> Where can I download 4.83SP2 client ? > http://www.novell.com/coolsolutions/tools/1764.html

2/2/04

Andrzej P., … Marcel Cox4

2/2/04

trunk from server to switch on 3 lan cards

Andrzej P. wrote: > I'll try to do this but I've got only one 3COM 980 card in this >

unread,

trunk from server to switch on 3 lan cards

Andrzej P. wrote: > I'll try to do this but I've got only one 3COM 980 card in this >

2/2/04

Lovello Novello, Dave Lunn2

1/31/04

NetWare 4.11 Install Advice

Set up your Sys: volume so that you are the only one with access to anything but Public. Set your

unread,

NetWare 4.11 Install Advice

Set up your Sys: volume so that you are the only one with access to anything but Public. Set your

1/31/04

Tom Luedtke, … Dave Lunn7

1/30/04

Hard Drive Upgrade

Both work well, both are simple and safe. -- Dave Lunn NSC SysOp http://support-forums.novell.com

unread,

Hard Drive Upgrade

Both work well, both are simple and safe. -- Dave Lunn NSC SysOp http://support-forums.novell.com

1/30/04

col...@gerbi-fase.it, AndersG2

1/29/04

Bindery migration after hardware upgrade

, > How can I duplicate bindery to new server ? There is no separate bindery info. It is all in DS

unread,

Bindery migration after hardware upgrade

, > How can I duplicate bindery to new server ? There is no separate bindery info. It is all in DS

1/29/04

eud...@eudres.com.br, … Barry Schnur5

1/27/04

> We have a Netware 4.10 running into a Duron 1600 with an SCSI 4.2 GB. > I would like to add

unread,

> We have a Netware 4.10 running into a Duron 1600 with an SCSI 4.2 GB. > I would like to add

1/27/04

nwa...@hotmail.com, … Barry Schnur8

1/26/04

4.11 / 4.2SB license transfers?

Keith, first, make sure you have the license diskettes in hand and that they are in good shape as you

unread,

4.11 / 4.2SB license transfers?

Keith, first, make sure you have the license diskettes in hand and that they are in good shape as you

1/26/04

Ray Simmons, … Andrew C Taubman3

1/26/04

Renaming a 4.11 server

Renaming is easy, just change the name in autoexec.ncf and reboot. Then manually change the volume

unread,

Renaming a 4.11 server

Renaming is easy, just change the name in autoexec.ncf and reboot. Then manually change the volume

1/26/04

Greg Seamen, Craig Wilson4

1/24/04

NCP conversation causes high server utilization

Good Luck! Hope that helps. Greg Seamen wrote: > Craig Wilson wrote: > > > Most Likely a

unread,

NCP conversation causes high server utilization

Good Luck! Hope that helps. Greg Seamen wrote: > Craig Wilson wrote: > > > Most Likely a

1/24/04

da...@dhcs.com.au, … Dave Lunn5

1/23/04

Upgrading Netware 4.11 to 4.2

If it is a 4.11 Small Business version, then you build up a test bed and patch it to SP9. I have not

unread,

Upgrading Netware 4.11 to 4.2

If it is a 4.11 Small Business version, then you build up a test bed and patch it to SP9. I have not

1/23/04

Corey Arndt, … Barry Schnur7

1/21/04

Disable Compression Question

Ah -- OK -- with Traditional volumes (and of course any NW 4x volume is Traditional), compression is

unread,

Disable Compression Question

Ah -- OK -- with Traditional volumes (and of course any NW 4x volume is Traditional), compression is

1/21/04

trankil, … Dave Lunn3

1/20/04

Migrate server: License?

An alternative might be to look into Storage Manager from http://www.portlocksoftware.com to move

unread,

Migrate server: License?

An alternative might be to look into Storage Manager from http://www.portlocksoftware.com to move

1/20/04

matthias....@student.uni-siegen.de, Barry Schnur2

1/19/04

Error during the setup of the client

Which client version specifically are you using here? With a 4.2 server, I'd suggest going with

unread,

Error during the setup of the client

Which client version specifically are you using here? With a 4.2 server, I'd suggest going with

1/19/04

Jerry Thomas, Edison Ortiz2

1/18/04

Not recognizing new IPX address

Did you change the address from within INETCFG as well ? What section of autoexec.ncf was changed ?

unread,

Not recognizing new IPX address

Did you change the address from within INETCFG as well ? What section of autoexec.ncf was changed ?

1/18/04

tim, … Dave Lunn7

1/15/04

scsi controller issue

It has sp9a. Everything works accept the driver for the onboard scsi. config.txt: Novell File Server

unread,

scsi controller issue

It has sp9a. Everything works accept the driver for the onboard scsi. config.txt: Novell File Server

1/15/04

Hitendra Khatri, … tim7

1/14/04

4.2 on Proliant ML350 G3 Possible ?

Hi - Sounds like quite a process. Please do not think of it as a waste of time, though. I just read

unread,

4.2 on Proliant ML350 G3 Possible ?

Hi - Sounds like quite a process. Please do not think of it as a waste of time, though. I just read

1/14/04

mar...@childrensdayton.org, Barry St.John2

1/7/04

installing one Novell 4.2 Server in a Novell 5.1 enviromnet

Duplicate. Your question was replied to in the novell.support.os.server.netware5x.install-upgrade

unread,

installing one Novell 4.2 Server in a Novell 5.1 enviromnet

Duplicate. Your question was replied to in the novell.support.os.server.netware5x.install-upgrade

1/7/04

nites...@hotmail.com, … Barry Schnur4

1/6/04

It shows 66 mb (64 mb app) instaed of 256 mb ram

Does the BIOS report 256M? -- Barry Schnur Novell Support Connection Volunteer Sysop

unread,

It shows 66 mb (64 mb app) instaed of 256 mb ram

Does the BIOS report 256M? -- Barry Schnur Novell Support Connection Volunteer Sysop

1/6/04

bill.b...@revest.com, … Barry St.John9

1/5/04

Sorry for the delay in replying. I've been gone for the holidays. > Crtl-Alt-Esc was what I

unread,

Sorry for the delay in replying. I've been gone for the holidays. > Crtl-Alt-Esc was what I

1/5/04

krishn...@obcc.net, Krishn...@obcc.net3

12/29/03

Upgrade HDD,ServerName and VolumeName Change Slow network

I do have plenty of free RAM (which I assume and with the software I ran) and Total RAM is 1.256

unread,

Upgrade HDD,ServerName and VolumeName Change Slow network

I do have plenty of free RAM (which I assume and with the software I ran) and Total RAM is 1.256

12/29/03

bill.b...@revest.com, Suzanne Miles2

12/29/03

how about these ideas? TROUBLESHOOTING 1. Verify that INETD and FTPSERV nlms were loaded. 2. Verify

unread,

how about these ideas? TROUBLESHOOTING 1. Verify that INETD and FTPSERV nlms were loaded. 2. Verify

12/29/03

Scott Johnson, … Bill Bradley7

12/26/03

4.11 to 4.11 Migration?

You should probably look at PortLock software, too... "Scott Johnson" <Scott.Johnson@

unread,

4.11 to 4.11 Migration?

You should probably look at PortLock software, too... "Scott Johnson" <Scott.Johnson@

12/26/03

Dan Egli, … AndersG6

12/24/03

How to creeate an Admin user

There really should be a root object there... Hit backspace until it prompts you to "Set Context

unread,

How to creeate an Admin user

There really should be a root object there... Hit backspace until it prompts you to "Set Context

12/24/03

ebe...@consisho.com, … Craig Wilson4

12/24/03

A network node reclaims a net number and should be another

Type "Load Install" and edit the "autoexec.ncf" file. Look for a line that has

unread,

A network node reclaims a net number and should be another

Type "Load Install" and edit the "autoexec.ncf" file. Look for a line that has

12/24/03

tand...@hometowntechnologies.com, Dave Lunn3

12/24/03

no tree / context

Duplicate. Answered in discontinued. Please do not post the same question in multiple forums. It

unread,

no tree / context

Duplicate. Answered in discontinued. Please do not post the same question in multiple forums. It

12/24/03

Martin Imber, … Barry Schnur11

12/19/03

Getting user licences

By the way, regarding 'going over to the dark side' and that move being Windows 2000 Server:

unread,

Getting user licences

By the way, regarding 'going over to the dark side' and that move being Windows 2000 Server:

12/19/03

Barry Schnur, … Dave Harry16

12/19/03

All in one motherboards

OK - -thanks for the report back -- good to know that it all works after the SP9 is in place. --

unread,

All in one motherboards

OK - -thanks for the report back -- good to know that it all works after the SP9 is in place. --

12/19/03

Dan, Edison Ortiz4

12/18/03

create admin user?

If using NetWare4.11, you can find it under SYS:PUBLIC\WIN32 If using older versions of NetWare4.x,

unread,

create admin user?

If using NetWare4.11, you can find it under SYS:PUBLIC\WIN32 If using older versions of NetWare4.x,

12/18/03

Search

Clear search

Close search

Google apps

Main menu