Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Teaming DL380

0 views
Skip to first unread message

david...@cial.co.nz

unread,
Oct 31, 2003, 4:10:38 PM10/31/03
to
Hi all, I have this working finally, what an effort. Novell Doc's on this
are not that helpfull. But I can only get it going in Smart Load Balance
Mode and not NFT. I haver tried adding the command MODE=NFT at various
places in the Autoexec.ncf file but with no luck, Below is the
Autoexec.ncf part I have used so far.

As you can see I am using Q57.LAN drivers and QASP as CPQANS dosn't like
the card that are built into the server, Twin Gigabit's

Any help greatfully accepted.

Cheers
David

LOAD Q57 NAME=Q57_1_E82 FRAME=Ethernet_802.2 SLOT=10015
LOAD Q57 NAME=Q57_1_E83 FRAME=Ethernet_802.3 SLOT=10015
LOAD Q57 NAME=Q57_1_EII FRAME=Ethernet_II SLOT=10015

LOAD Q57 NAME=Q57_2_E82 FRAME=Ethernet_802.2 SLOT=10016
LOAD Q57 NAME=Q57_2_E83 FRAME=Ethernet_802.3 SLOT=10016
LOAD Q57 NAME=Q57_2_EII FRAME=Ethernet_II SLOT=10016

LOAD QASP NAME=TEAM_1_E82 FRAME=Ethernet_802.2 VSLOT=1
LOAD QASP NAME=TEAM_1_E83 FRAME=Ethernet_802.3 VSLOT=1
LOAD QASP NAME=TEAM_1_EII FRAME=Ethernet_II VSLOT=1

QASP BIND QASP Q57_1_E82 VSLOT=1
QASP BIND QASP Q57_1_E83 VSLOT=1
QASP BIND QASP Q57_1_EII VSLOT=1

QASP BIND QASP Q57_2_E82 VSLOT=1
QASP BIND QASP Q57_2_E83 VSLOT=1
QASP BIND QASP Q57_2_EII VSLOT=1

#POSTBINDCOMMAND QASP
LOAD QASP COMMIT VSLOT=1
#END OF POST BIND COMMAND

LOAD TCPIP
LOAD IPXRTR
LOAD IPXRTRNM

BIND IP TEAM_1_EII ADDR=202.14.167.202 MASK=255.255.255.0
GATE=202.14.167.2 VSLOT=1
BIND IPX TEAM_1_E82 net=31c6d6ac seq=1 VSLOT=1
BIND IPX TEAM_1_E83 net=ca167011 seq=2 VSLOT=1

LOAD ODINEB.NLM

Marcel Cox

unread,
Nov 1, 2003, 8:59:03 AM11/1/03
to
QASP.LAN and Q57.LAN are the HP/Compaq specific versions of the generic
Broadcom drivers B57.LAN and BASP.LAN.
These are proprietary drivers not written by Novell and as such Novell
does not document how to use them.
I could not find any HP/Compaq specific documentation on this, but I found
the following documentation that refers to the generic Broadcom drivers
B57.LAN and BASPI.LAN:
http://www.viglen.co.uk/support/Manuals/NetworkCards/3Com/3c966bt/userguide.pdf

Look in the chapter "Novell NetWare Driver Setup" section
"Installing Advanced Server Features"
The same instructions should work for the HP/Compaq drivers if you replace
B57.LAN by Q57.LAN and BASP by QASP each time you see them.

--
Marcel Cox
Using VA 5.51 build 315

david...@cial.co.nz

unread,
Nov 3, 2003, 3:01:18 PM11/3/03
to
Thanks Marcel, I will try this in the weekend.

David

0 new messages