Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss
CE1000 duplex settings
0 views
Skip to first unread message
William Artus
Nov 26, 2003, 5:58:25 PM11/26/03
to
my ce1000.lan driver is running at half-duplex and that is a problem, I'm
using inetcfg, also I have have seen some posting about the ldi file for
the lan driver, and the ce1000 dosen't have the setting for full-duplex in
it, is it possible to use a forceduplex=2 setting in the netinfo.cfg, and if
not what setting would I put in the ldi file to setup full-duplex.
Thanks
Bill
using inetcfg, also I have have seen some posting about the ldi file for
the lan driver, and the ce1000 dosen't have the setting for full-duplex in
it, is it possible to use a forceduplex=2 setting in the netinfo.cfg, and if
not what setting would I put in the ldi file to setup full-duplex.
Thanks
Bill
Hamish
Nov 26, 2003, 8:55:48 PM11/26/03
to
William,
You can't force duplex on gigabit links - it has to occur via autonegotiation.
If you're failing to get gigabit link negotiating properly you have a problem
with your equipment or cabling.
--
Hamish Speirs
Novell Support Forums Volunteer Sysop.
(No email unless requested please)
0 new messages