3Com NIC problem after NW upgrade

[Paul]

I have a Bordermanager server running Netware 6 which was recently
upgraded from NW 5.1. The server has 3 NICs , 1 for public, one for
private and one for DMZ. Everything worked fine until the upgrade but
now I cannot get the third network card to work.

Two of the cards in the machine are the same (3com 3C905c's ) and one of
them is the one that wont work, the other one works fine. I have tried
another card of the same type and in different slots. As well as the
latest driver from the 3Com site.

The server finds the card ok when I do the "Discover and Load Additional
Devices" but then I get this error in the alternate console screen when I
try to load the driver:-

LOAD SYS:SYSTEM\3C90XC.LAN SLOT=4 FRAME=Ethernet_802.2 NAME=3C90XC_1_E82
Loading Module 3C90XC.LAN [REENT FAIL]

I am lost...

Any help greatly appreciated. Its an IBM Netfinity 5600 server if that
helps.

Thanks

Paul

[Dave Lunn]

Check your NIC names, looks like you have a duplicate maybe.
--
Dave Lunn
NSC SysOp
http://support-forums.novell.com