}
but i cant connect nw6
how is creating bootdisk for nw6
thanks from turkey
"PetervdM" <peter.van.d...@adp.nl>, iletide şunu yazdı
news:wIRdb.549$681...@prv-forum3.provo.novell.com...
Your startup for it will have a net.cfg like so: The indents are critical
and must be 4 spaces min.
Link driver 3C59X.COM
REM int 5
REM PORT 340
FRAME Ethernet_802.2
rem frame ethernet_802.3
Netware DOS Requester
PREFERRED WORKGROUP = xx
FIRST NETWORK DRIVE = f
NETWARE PROTOCOL = PNW,BIND,NDS
spx connections = 60
SHOW DOTS = ON
USE DEFAULTS = ON
VLM = AUTO.VLM
and a Startnet like so:
LSL
Load (nic driver)
IPXODI
VLM
--
Dave Lunn
NSF SysOp
http://support.novell.com
berkay wrote:
--
Craig Wilson
CNE3, 4, 5 - MCSE - CCNA
NSC Sysop (http://support.novell.com/forums/)
Tech Writer - http://www.ithowto.com
(I Peter 4:10)
"Craig Wilson" <craig_d...@yahoo.com>, iletide sunu yazdi
news:3F78B394...@yahoo.com...
> For NETX you also need to define a bindery context, as NETX does not
> understand NDS/eDir. Best to use the VLM client or Client32 for
> DOS/Win3x.
Also for VLM check whether IPX is installed on your NW5.1 server, VLM
requires IPX.
During the VLM setup take care to specify the same frame type bound to
the servers IPX protocol (e.g. ethernet_802.2)
bye, Rudi.