Google Groups no longer supports new Usenet posts or subscriptions. Historical content remains viewable.
Dismiss

Re: Internet Access

1 view
Skip to first unread message

Anders Gustafsson

unread,
Jul 12, 2010, 4:38:38 PM7/12/10
to
Jstonend,
> 2nd Netware server assigning IP's with DHCP
>
> I'd like to give the PC's access to the Internet without using anything
> like Bordermanager - just a straight shot out of the network for my PC's
> and other servers.
>
Just set up dynamic NAT in INETCFG.

- Anders Gustafsson (Sysop)
The Aaland Islands (N60 E20)


Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms

Anders Gustafsson

unread,
Jul 13, 2010, 3:03:24 AM7/13/10
to
Jstonend,
> Are there any other settings to adjust?
>
> Will this affect my Static NAT settings?
>
Just change NAT in INETCFG from "STATIC" to "STATIC and DYNAMIC"

Anders Gustafsson

unread,
Jul 13, 2010, 4:34:18 PM7/13/10
to
Jstonend,
> Again - thanks!
>
No problem -here to help!

Anders Gustafsson

unread,
Jul 13, 2010, 11:37:25 AM7/13/10
to
Jstonend,
> I've made the change and re-initialized the system and I can still only
> access the Internet through my BM proxy server... am I missing a step?
>
Hard to say. You have activated dynamic NAT? CAn you ping the router that
connects you to the internet from your PC?

You might also try a TCPIP DEBUG (see the knowledgebase) to verify that
NAT is eally taking place.

0 new messages