Tape-unit causes problem with netware partition

[Ronnie Berkhof]

Hello,

We have a Netware 5.1 server that was running smoothly until the
tape-unit was replaced because a tape was stuck in it. After the
tape-unit was replaced we found that every morning the netware partition
is gone. The volumes are dismounted.
If you reset the server by "reset server" it's coming up normally and
the users can work all day. We have already upgraded the server with
SP1, SP2a and SP3 of netware 5.1. Arcserve 6.6 is upgrades with SP4. The
tape-unit is replaced several times now. The tape-unit is external and
is not on the same SCSI as the harddisk. (They have only one harddisk,
it's a small server). Last night we did not let the Arcserverjob run.
Still the server showed us the same problems.

Thanx

Ronnie Berkhof
r.be...@acto.nl

[Dan Healy]

Load Conlog at the console and see what and when it happens

Dan

"Ronnie Berkhof" <r.be...@acto.nl> wrote in message
news:3BAAFE46...@acto.nl...