how to configure Tcp/ip on novell netware 3.12?

[anne]

My Nw3.12 server has just a Ne2000 net adapter. I'd like to bind both ipx and Tcpip protocol to it. What can I do? Thanks in advance.

My autoexec.ncf:
file server name Happy
ipx internal net 012
load ne2000 port=300 int=3 frame=Ethernet_802.2
bind ipx to ne2000 net=2

[Atanas Ivanov]

Hello Anne,
you must donload free TCPIP 4.01G packet from Novell Updates, then install
it.
You must decide which IP-area will use (192.168.2.??? - is free). I use
subnetworks with maximum 30 nodes (32 but addresses 0 and 31 is special and
unusable).
Then add theese lines to autoexec.ncf (after second line in old
autoexec.ncf):

load ne2000 port=300 int=3 frame=Ethernet_802.2 name=NE_IPX
bind ipx to NE_IPX net=2
load ne2000 port=300 int=3 frame=Ethernet_II name=NE_IP

load TCPIP
Load SnmpLog

Bind IP to NE_IP ADDR=192.168.2.1 MASK=255.255.255.224
;--------------------------------------

Then assign IP addresses ( in area 192.168.2.x where x > 1, but x < 31, and
different between itself) to your workstations and try ping.
Good luck,
Atanas Ivanov
Bank DSK PLC - Haskovo, Bulgaria

anne wrote in message <7spquh$pa...@nexus.provo.novell.com>...

[Felton Green]

Anne,

Please post your question in only one newsgroup. Multi postings will dilute
the answer you receive from those of us who have to read them all. Thanks.
This more correctly belongs over in the install upgrades BTW.

--
Felton Green
Novell Support Connection Volunteer SysOp
anne <yuan...@163.net> wrote in message
news:7spquh$pa...@nexus.provo.novell.com...