Exchange GW / GW 5.2.5 install

[Troy Tate]

We are installing a test Exchange to GW gateway. The installation
works w/o a problem. We create the gateway object in nwadmin. When
running EXGATE.EXE, it never fully starts. I see the status screen
flash up and then it goes away. Then, it appears that EXGATE.EXE runs
again, over and over. I put the gateway log in diagnostic mode and
receive the following log entries:

12-12-00 16:32:52 0 ********************* Gateway Started 12-12-00
16:32:52 0 ****** 2000-12-12 16:32:52 ******
12-12-00 16:32:52 0 {GweCorr:GweCorrInit
12-12-00 16:32:52 0 }GweCorr:GweCorrInit
12-12-00 16:32:52 0 {GWEACCT:GweAcctInit
12-12-00 16:32:52 0 }GWEACCT:GweAcctInit
12-12-00 16:32:52 0 OK
12-12-00 16:32:52 0 {GWEAC:GweacInit
12-12-00 16:32:52 0 }GWEAC:GweacInit
12-12-00 16:32:52 0 OK
12-12-00 16:32:52 0 Address Type : GWISE
12-12-00 16:32:52 0 Display Name : System Administrator
12-12-00 16:32:52 0 Email Address : sysadmin
12-12-00 16:32:52 0 Inbound Converter : GROUPWISE.INBOUND
12-12-00 16:32:52 0 Outbound Converter : GROUPWISE.OUTBOUND
12-12-00 16:32:52 0 R:\99CTS_DO\wpgate\Exchange
12-12-00 16:32:52 0 99CTS_DO
12-12-00 16:32:52 0 SOFTWARE\Novell\GroupWise
Gateways\Exchange\99CTS_DO\Exchange\Parameters
12-12-00 16:32:52 0 Could not open registry parent key to get Display
Name information. Using defaults..
12-12-00 16:32:52 0 {XDXSUtils:ReadExpContainer
12-12-00 16:32:53 0 Unable to obtain directory handle while
initialising directory operations
12-12-00 16:32:53 0 }XDXSUtils:ReadExpContainer
12-12-00 16:32:56 0 {GWEACCT:GweSendAcctFile
12-12-00 16:32:56 0 }GWEACCT:GweSendAcctFile
12-12-00 16:32:56 0 OK
12-12-00 16:32:56 0 ****** 2000-12-12 16:32:56 ******
12-12-00 16:32:56 0 ******************** Gateway Terminated
12-12-00 16:32:56 0 {GWEAC:GweacQuit
12-12-00 16:32:56 0 }GWEAC:GweacQuit
12-12-00 16:32:56 0 OK
12-12-00 16:32:56 0 {GWEACCT:GweAcctQuit
12-12-00 16:32:56 0 }GWEACCT:GweAcctQuit
12-12-00 16:32:56 0 OK

This repeats over and over as many times as the gateway tries to
autostart. Any suggestions or ideas are very welcome! Thanks.

Troy Tate
Corporate Network Manager
CTS Corp.
tt...@ctscorp.com

[Troy Tate]

I got this working now. It was a setting in the Exchange administrator
for auto-created names. It was not set to NONE as the TID suggests,
but was set to another option. I set it to a different option and
restarted the gateway and it worked.

My question now is: I can push info from GroupWise into Exchange by
performing a Synchronization in nwadmin. How do I push the Exchange
info over to GroupWise? Thanks for the advice.