NDS CE & Print Server problems

[Vikas Mahajan]

Ron,

NDS CE servers with NDS replicas will reply to GNS requests. There is a
option to turn this off in the NDS services panel (I think you have to
launch DSTRACE and go to Misc options). However, it seems these NT
servers will still reply in some cases. The easiest solution is to pull
the NDS replica from the NT server. You shouldn't need the replica if
there are NetWare servers available locally to the NT box.

There is also a field test patch for this issue. You can get it by
calling Novell support or e-mailing me with your contact information and
e-mail address. If you go through me, it's free, but it's use at your
own risk.

You mentioned having two frame types bound. Is there any particular
reason for this? You may be able to set the NT server to use just one
frame type and the print servers to use the other.

Good Luck,

--
Vikas Mahajan
Novell Support Connection Volunteer SysOp

[Frank Weigert]

Another option would be to reconfigure the NT-Server to use IP-only (a
little bit tricky in an NDS CE environment) The Printservers can not talk
NCP over IP and thus will always connect to the Netware box.
As a last option you could use NDPS, this would resolve the issue also.

Frank Weigert
"Vikas Mahajan" <mah...@bellatlantic.net> wrote in message
news:3A37EB5E...@bellatlantic.net...