--
You received this message because you are subscribed to the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this group and stop receiving emails from it, send an email to nottinghack...@googlegroups.com.
To post to this group, send email to notti...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/7880ee7e-9477-4e48-aacc-135e7a7d4125%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
--
You received this message because you are subscribed to a topic in the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/nottinghack/HaIj_roLIPE/unsubscribe.
To unsubscribe from this group and all its topics, send an email to nottinghack...@googlegroups.com.
To post to this group, send email to notti...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/68048138-5975-43d0-8f0f-1c6f0b72e5b8%40googlegroups.com.
I see this machine as free to use, no compulsory induction. instructions and videos will be made available on the wiki
A voluntary(low cost) workshop session will be set up and this will be free to pledgers.
Just a thought for discussion, rather than each member having to buy 500ml or so of resin, have to fill and empty the machine each time they use it risking spillages and have to store their stock somewhere, would it be better if there was a usage charge and the machine could be left filled?
--
You received this message because you are subscribed to the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this group and stop receiving emails from it, send an email to nottinghack...@googlegroups.com.
To post to this group, send email to notti...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/9ba8a30f-0b43-4efc-8742-9871232beea1%40googlegroups.com.
You received this message because you are subscribed to a topic in the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/nottinghack/HaIj_roLIPE/unsubscribe.
To unsubscribe from this group and all its topics, send an email to nottinghack...@googlegroups.com.
To post to this group, send email to notti...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/CAByPWHMXZs5ZkgKWS2VRLeyvnT%3DgB-UkmfOWxNVwVOYPMT%3D63A%40mail.gmail.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/CAGvciFKKAd_ARLStV%3D77bDjELSaa4FFDqc-CA3gZXYifzJoY6A%40mail.gmail.com.
we have £110 to go!
--
You received this message because you are subscribed to the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this group and stop receiving emails from it, send an email to nottinghack...@googlegroups.com.
To post to this group, send email to notti...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/cb1e6493-a38e-4b42-9855-66bfdb4b21cc%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this group and stop receiving emails from it, send an email to nottinghack...@googlegroups.com.
To post to this group, send email to notti...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/b1b2441e-7b0a-4caf-8b5e-9186f4484d89%40googlegroups.com.
You received this message because you are subscribed to a topic in the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/nottinghack/HaIj_roLIPE/unsubscribe.
To unsubscribe from this group and all its topics, send an email to nottinghack...@googlegroups.com.
To post to this group, send email to notti...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/CAByPWHOKHqeBU%3DBRVVzMiw8dPHE9XdwKYvj3oTNevs5FpXVyAw%40mail.gmail.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/CA%2B5xryEz8gr0_6eN20Xhq3-bCoDP5hjnMU%2BRt2H%3Dz7pL8LYVEg%40mail.gmail.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/CAByPWHMoXg-1MLAJbt3CQr9a1QiP%2BM51pWQ59CM-RNC%3DfaGNzw%40mail.gmail.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/CA%2B5xryGXSAjBAqvQB-O0EpFbeYuRPVBzoLJU6x9J6vUzoL-C1A%40mail.gmail.com.
The resin smell is an issue with some resins in confined spaces and only really a problem when it's powered on. When is switched off the smell is contained inside. I have mine in my 10'x13' garden shed and have the door open when I can but even when the door it's closed its not really unbearable.
I own the Anycubic Photon already so don't mind offering my services or answering questions.
The resin smell is an issue with some resins in confined spaces and only really a problem when it's powered on. When is switched off the smell is contained inside. I have mine in my 10'x13' garden shed and have the door open when I can but even when the door it's closed its not really unbearable.
--
You received this message because you are subscribed to the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this group and stop receiving emails from it, send an email to nottinghack...@googlegroups.com.
To post to this group, send an email to notti...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/56407409-4789-4484-ae95-5c565493d8da%40googlegroups.com.
You received this message because you are subscribed to a topic in the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/nottinghack/HaIj_roLIPE/unsubscribe.
To unsubscribe from this group and all its topics, send an email to nottinghack...@googlegroups.com.
To post to this group, send email to notti...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/CAByPWHOGAFYmYE8SSmLAuivoK4j2%2Buf0x%3DZem4E%3DoddLcGSuKg%40mail.gmail.com.
It really does need an extractor system.
It also will need some kind of insulation or vat heater in winter as colder temperatures affect many factors during printing.
Personally it's not something I'd leave completely open use either, as one person making a mistake can destroy the FEP, the screen, the bearings, and cause hours of cleanup and trouble shooting for the next user.
For example: getting resin slightly above the recommended fill level will get it into the ball joint of the plate, and require total strip down of the assembly.
If you can guarantee every hackspace member can accurately pour liquid into a tray, I'd be delighted.
--
You received this message because you are subscribed to the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this group and stop receiving emails from it, send an email to nottinghack...@googlegroups.com.
To post to this group, send an email to notti...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/092a7605-d4d0-4eac-9353-9d7ad149739a%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this group and stop receiving emails from it, send an email to nottinghack...@googlegroups.com.
To post to this group, send email to notti...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/d4e34f22-e2f9-4368-ba79-1c52333ebe0e%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this group and stop receiving emails from it, send an email to nottinghack...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/1e82ca0c-c097-4bbd-a7d5-fd7b733ea5b4%40googlegroups.com.
You received this message because you are subscribed to a topic in the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/nottinghack/HaIj_roLIPE/unsubscribe.
To unsubscribe from this group and all its topics, send an email to nottinghack...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/CAByPWHMkbmytyz1zHFmszKrrqycbGk1YRvFAifqsNt-ERe7pkw%40mail.gmail.com.
--
You received this message because you are subscribed to a topic in the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/nottinghack/HaIj_roLIPE/unsubscribe.
To unsubscribe from this group and all its topics, send an email to nottinghack...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/acb27346-9fcc-4e18-8dc2-34556725b4e2%40googlegroups.com.
You received this message because you are subscribed to the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this group and stop receiving emails from it, send an email to nottinghack...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/CA%2B5xryFNRqY3899RdnSgehwGfUmAwaxxBjnAcxX7maV4icSpRg%40mail.gmail.com.
Flippance aside - safe disposal of stuff like IPA and resin is everyone's responsibility if they're using the kit, so it's not an unreasonable consideration to keep in mind.
... Plus ,to be honest I am making as i go. Its the way things get done in the space. we cant just talk we have to act and move forward.
--
You received this message because you are subscribed to a topic in the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/nottinghack/HaIj_roLIPE/unsubscribe.
To unsubscribe from this group and all its topics, send an email to nottinghack...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/CAO93PtfuwmK-Oo_P6ZKMNH5L766JLVhaR952HhtX5V1oV3Y9wg%40mail.gmail.com.
--
You received this message because you are subscribed to a topic in the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/nottinghack/HaIj_roLIPE/unsubscribe.
To unsubscribe from this group and all its topics, send an email to nottinghack...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/57b9ab38-b8ad-4495-9030-27c691e63466%40googlegroups.com.
Hi Edward,I thought upstairs near the spray room might be a low cost solution.Arthur
On Fri, 19 Jul 2019 at 15:33, Edward Podgorski <ed...@hotmail.com> wrote:
As a footnote re possible expense. I had a discussion with James another trustee regarding the potential issue of resin fumes. (Note that some responses in other threads indicate that they have already got the same bit of kit at home and they consider it a problem so I am going by what people have experienced.) The location of the this printer may have to be upstairs and connect to the extractor unit we already have which serves the spray booth. That way it would not be so costly to undertake. I appreciate we need to see but better to think out a solution should there be a problem rather than a bit of kit members have bought not being able to be used because of issues and complaints from other members who may not be users.--
On Monday, June 24, 2019 at 7:07:39 PM UTC+1, Dave s wrote:HI memberscheck out this pledge drive for a high resolution liquid resin 3D printer. You can use this to make "warhammer" style models, jewellery, buttons even teeth!
You received this message because you are subscribed to a topic in the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/nottinghack/HaIj_roLIPE/unsubscribe.
To unsubscribe from this group and all its topics, send an email to notti...@googlegroups.com.
You received this message because you are subscribed to the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this group and stop receiving emails from it, send an email to nottinghack...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/CA%2B5xryHg15U2RjxGtBO7zR1HmFT2g9AhjuCBPQHuwc%3Dy7QYqrg%40mail.gmail.com.
You received this message because you are subscribed to the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this group and stop receiving emails from it, send an email to nottinghack...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/41f68b5c-2965-4e43-93ab-210d22676754%40googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/CAByPWHP-Ld988Yh3fcCeXVOGnhSQJKub5iWXWkN%2B3KKCL412Mg%40mail.gmail.com.
Just a thought, I have no opinions.
--
You received this message because you are subscribed to the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this group and stop receiving emails from it, send an email to nottinghack...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/110dea38-b87c-4bbc-97a9-0d397d85069d%40googlegroups.com.
You received this message because you are subscribed to a topic in the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/nottinghack/HaIj_roLIPE/unsubscribe.
To unsubscribe from this group and all its topics, send an email to nottinghack...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/CAByPWHNY6DcX7fAD1ZcRt3Schw7ZY5xvf1od3u41-oKaz8GtTQ%40mail.gmail.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/CA%2B5xryFBgQeg9T46zJfKmZ7SPyFXW3gRvD_BkfqGob8J81ER2w%40mail.gmail.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/CAByPWHPBhD_f294n9bHsqAEt6RroJqzJhJ3YJ0BmqvEARnpmNg%40mail.gmail.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/0DF8F795-C648-4FDF-B114-EB289AA6BF8F%40gmail.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/CA%2B5xryH0WBWpqrD%3D9_BtwHCpWV93XNBwGNk%2BeMPrciL-JZGb7Q%40mail.gmail.com.
You received this message because you are subscribed to a topic in the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/nottinghack/HaIj_roLIPE/unsubscribe.
To unsubscribe from this group and all its topics, send an email to nottinghack...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/CAByPWHNY6DcX7fAD1ZcRt3Schw7ZY5xvf1od3u41-oKaz8GtTQ%40mail.gmail.com.
--
You received this message because you are subscribed to the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this group and stop receiving emails from it, send an email to nottinghack...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/3679f6fd-c178-4b1d-8e4d-d8d2d08323c2%40googlegroups.com.
You received this message because you are subscribed to a topic in the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/nottinghack/HaIj_roLIPE/unsubscribe.
To unsubscribe from this group and all its topics, send an email to nottinghack...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/CAByPWHNgwMn--sopWiCjbbv9REAfMsSsHP%2BOH6jkGEx1OzAu7A%40mail.gmail.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/CAEYqibsGRWc-Sjky_Pg_1fgdXPtGN54EV%3DSHe-eRN%2BQtrybajA%40mail.gmail.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/CAEYqibsGRWc-Sjky_Pg_1fgdXPtGN54EV%3DSHe-eRN%2BQtrybajA%40mail.gmail.com.
I'm not sure to be honest.
I imagine it will be similar to the ultimaker where it's all printed separately on the bed with support structures that are automatically generated by the slicing program. Don't think a sprue will be needed
Dan
--
You received this message because you are subscribed to a topic in the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/nottinghack/HaIj_roLIPE/unsubscribe.
To unsubscribe from this group and all its topics, send an email to nottinghack...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/a27da970-3419-4333-ae13-f69f91c2a99f%40googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/CA%2B5xryFG2ZEgKVCWMn2BG0rvh-L%2B%2BmQ7kA41g1-L7A20HyJo3w%40mail.gmail.com.
You received this message because you are subscribed to the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this group and stop receiving emails from it, send an email to nottinghack...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/CA%2B5xryHD47NfixVZpGm%2Bc9XHOhvdyLKVMTuqQfDP%3DJ_5NB7eAw%40mail.gmail.com.
hi arthurgood question.you can put multiple objects on the bed and they will all print at the same time. how you orientate your models is very important, usually at a 45 degree angle with full auto supports. you will also need to check to see that everything that needs support has it.we will be inducting and recommending Chitubox slicing softwarethere are some very good videos on youtube
On Thu, 8 Aug 2019 at 17:45, Arthur Moore <arthur...@gmail.com> wrote:
Thanks Dan,I will try it that way and see how it goes.All the bestArthur
On Thu, 8 Aug 2019 at 17:34, Dan Spencer <danspe...@gmail.com> wrote:
Hi Arthur,
I'm not sure to be honest.
I imagine it will be similar to the ultimaker where it's all printed separately on the bed with support structures that are automatically generated by the slicing program. Don't think a sprue will be needed
Dan
--
You received this message because you are subscribed to a topic in the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/nottinghack/HaIj_roLIPE/unsubscribe.
To unsubscribe from this group and all its topics, send an email to notti...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/a27da970-3419-4333-ae13-f69f91c2a99f%40googlegroups.com.
--
You received this message because you are subscribed to the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this group and stop receiving emails from it, send an email to notti...@googlegroups.com.
To unsubscribe from this group and stop receiving emails from it, send an email to nottinghack...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/b47c6a4b-3080-4039-9486-79777282465a%40googlegroups.com.
To unsubscribe from this group and all its topics, send an email to nottinghack...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/CAByPWHP-2LGniNVEg7N3eKC1NCiSgdgkDduzYgmtYAOQ8uRkvw%40mail.gmail.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/CAG_wVD_Ae0Xj6vuX63vsdKakpq_KFVst3XfjgShTucKNACgnkA%40mail.gmail.com.
To unsubscribe from this group and stop receiving emails from it, send an email to notti...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/b47c6a4b-3080-4039-9486-79777282465a%40googlegroups.com.
--
You received this message because you are subscribed to a topic in the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/nottinghack/HaIj_roLIPE/unsubscribe.
To unsubscribe from this group and all its topics, send an email to notti...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/CAByPWHP-2LGniNVEg7N3eKC1NCiSgdgkDduzYgmtYAOQ8uRkvw%40mail.gmail.com.
--
You received this message because you are subscribed to the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this group and stop receiving emails from it, send an email to notti...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/CAG_wVD_Ae0Xj6vuX63vsdKakpq_KFVst3XfjgShTucKNACgnkA%40mail.gmail.com.
To unsubscribe from this group and all its topics, send an email to nottinghack...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/86a97f21-fb2d-4fc0-b345-5ef46f76aa9d%40googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/86a97f21-fb2d-4fc0-b345-5ef46f76aa9d%40googlegroups.com.
To unsubscribe from this group and stop receiving emails from it, send an email to nottinghack...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/c8c7ad6d-5c16-43a5-b5af-95a3c8797cfe%40googlegroups.com.
To unsubscribe from this group and stop receiving emails from it, send an email to notti...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/c8c7ad6d-5c16-43a5-b5af-95a3c8797cfe%40googlegroups.com.
To unsubscribe from this group and all its topics, send an email to nottinghack...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/3fcab5d8-46fa-4018-acb6-5e9c09b1527b%40googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/3fcab5d8-46fa-4018-acb6-5e9c09b1527b%40googlegroups.com.
To unsubscribe from this group and all its topics, send an email to nottinghack...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/fbedbd9d-4119-49ab-b02c-7f282b28f352%40googlegroups.com.
To unsubscribe from this group and all its topics, send an email to nottinghack...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/fbedbd9d-4119-49ab-b02c-7f282b28f352%40googlegroups.com.
--
You received this message because you are subscribed to a topic in the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/nottinghack/HaIj_roLIPE/unsubscribe.
To unsubscribe from this group and all its topics, send an email to nottinghack...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/6e5fe8c0-80c8-48fa-aa6f-f3ed353205e1%40googlegroups.com.
--
Please could I do the induction at 2pm (or later) on Sat?
--
You received this message because you are subscribed to the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this group and stop receiving emails from it, send an email to nottinghack...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/d84ca586-a068-4e9a-a760-1438e816056b%40googlegroups.com.
You received this message because you are subscribed to a topic in the Google Groups "Nottingham Hackspace - Nottinghack" group.
To unsubscribe from this topic, visit https://groups.google.com/d/topic/nottinghack/HaIj_roLIPE/unsubscribe.
To unsubscribe from this group and all its topics, send an email to nottinghack...@googlegroups.com.
To view this discussion on the web, visit https://groups.google.com/d/msgid/nottinghack/CAByPWHP-tf7bd3czneOAQMYhE%2BgSqUt7-v25W19%3DMJd8JgqX-g%40mail.gmail.com.