Free to a good home, Laser cutter and Resin 3D printer.

[Chimeric G]

Hey folks, I have some old equipment that is just taking up space that I would prefer went to someone who can make use of it. If anyone is interested in either of the following let me know: Laser cutter (LS3020, basically a rebranded K40) Currently runs lasercut 5.3 software which requires a usb dongle (which I have), Needs a little TLC but is functional. Mostly used to cut/engrave 3mm wood and acrylic. Will need an extractor hooking up to it. Could have the controller swapped out to a Lightburn compatible one if you were so inclined. Photon Mono Resin 3D printer, fine and functional just been replaced by a newer machine. Based in Heaton area

[Alistair MacDonald]

Hi Chimeric,

I am interested in the laser.

Realistically I am not going to be able to collect before the 22nd as I am in the middle of a house move. Is that okay?

All the best,

  Alistair

On Mon, 13 Jan 2025 at 16:33, Chimeric G <designe...@gmail.com> wrote:

Hey folks, I have some old equipment that is just taking up space that I would prefer went to someone who can make use of it. If anyone is interested in either of the following let me know: Laser cutter (LS3020, basically a rebranded K40) Currently runs lasercut 5.3 software which requires a usb dongle (which I have), Needs a little TLC but is functional. Mostly used to cut/engrave 3mm wood and acrylic. Will need an extractor hooking up to it. Could have the controller swapped out to a Lightburn compatible one if you were so inclined. Photon Mono Resin 3D printer, fine and functional just been replaced by a newer machine. Based in Heaton area

--
You received this message because you are subscribed to the Google Groups "North East Makers" group.
To unsubscribe from this group and stop receiving emails from it, send an email to north-east-mak...@googlegroups.com.
To view this discussion, visit https://groups.google.com/d/msgid/north-east-makers/e44f1956-e3f1-47d4-b5f7-f937042e2cf1n%40googlegroups.com.