Nonolith Labs CEE

Hi Guys: Just checking in on any word on the next batch/version of CEE's. Recently breathed some

Hi Scott, The CEE is a 12 bit instrument offering a precision of approximately a few hundred

I've used the CEE and my wish list is a much lower current force and measure range - around 1uA

Dan, Few things to note. If I recall correctly, the magnitude of the nonlinearity is proportional to

Thanks! Everything seems to be working well. Will let you know if i need package but I should be ok.

Thx for the quick response - you saved me much swapping out programs. I'll double check my syntax

Thanks again, Here is the csv. This with the VS-B being compared to ground instead of 1.25V "The

Awesome, thanks for sharing! On Thu, Apr 24, 2014 at 5:26 PM, James Cameron <qu...@laptop.org>

Thanks for the tips. Between you and James, I should have a good start. Unfortunately, my project /

Hi François, The GPIO offer 3v3 input and output signals in a variety of digital protocol

I got the C# interface working... not sure if it is the most elegant but it sets the CEE up and also

I tried the re-flash but it seems to be doing the same thing. On Wednesday, January 22, 2014 7:46:02

I'm looking for easy way to connect my USB HW with xmega to LabView. Where to get info about

The external power supply mod only provides power for the output amplifier, so it's unlikely to

Hi John, One way to clear the data is to reconfigure the device. In Pixelpulse, click the "

No dates on V3 yet. Email te...@nonolithlabs.com with more info about your need for V2rc1 & we can

Hey Mike! Sorry to hear you had some setup difficulties. I don't have an immediate diagnosis, and

Hi Gavin, CEE hardware implements approximately the same functionality of a network analyzer, with

The APIs could definitely be improved a lot, so I'd love to hear what you're looking for and

Thanks for clearing up those issues Kevin. Although I totally agree with you that Cee is not an

Dan, Drop me a line off the list (ian@nonolith) and let's get a time to chat on the books. Best!

Oh, and this saves me getting my head dragged through the meatgrinder that is AVR Studio 6 and the

Hi Ian, Thanks for the reply. At the moment I'm mostly interested in PWM-ing LEDs. As such the

Hi Dillon, To flash the bootloader, you'll need a PDI programmer. Some of the 3rd-party AVR

Georg, CEE supports a current measurement step of 0.2mA, but due to a quirk in our current sense

Hi Andy, Unfortunately, the bus pirate support was a part of the previous version of PixelPulse,

Probably only going to be about 30-45min this time. You should be able to find it at https://plus.

Awesome, thanks! B On Mar 19, 8:49 pm, Ian Daniher <i...@nonolithlabs.com> wrote: > Hi Bill,

Kevin, sorry for the frustrated tone. I had everything but the asio-devel. But that seems to be the

Hi Jamie, We'll get a replacement out ASAP. Thanks for your patience. -- Ian On Fri, Mar 16, 2012