Xampp Download 64 Bit

[Tavarus Calamia]

Iinstalled XAMPP v3.2.1 because I wanted to learn how to create database in MySQL and learn more about TOMCAT. However, I am a little confused about what to do now. I have read many blogs and the documentation on this page -database.html.

Attempted Solution: I shut down skype because I read that might be an issue.I don't have any older versions of XAMPP on my computer and I don't believe I am connected to any other servers. So, I don't have permission to do anything.

But at first you have to set/change the MySQL Root password. Start the Apache server and type localhost or 127.0.0.1 in your browser's address bar. If you haven't deleted anything from the htdocs folder the xampp status page appears. Navigate to security settings and change your mysql root password.

By default your port is listing with 80.If you want you can change it to your desired port number in httpd.conf file.(If port 80 is already using with other app then you have to change it).

as given below image i'm sucess to run apache but unable to run mysql if in case i moved and run xampp both apache and mysql but its shows error which is fresh and it show the error like "Table doesn't exist in engine" #1932 as given up image. please solve the issue anyone help pls

I have faced same issue but copying the xampp\mysql\data\ibdata1 was not solved my problem, because I install new version of xampp, if you upgrading your xampp first make backup from all htdocs and mysql folder, in my case I just backup the all xampp to the new folder like old-xampp then install new xampp and then you need do the following steps before starting your new xampp servers:

ok step one you can copy from your old xampp xampp\mysql\data\ibdata1 and step two paste to your xampp new xampp\mysql\data\ibdata1 ,and than open your xampp controller and stop mysql and start again.

I had the same issue. I had a backup of my C:\xampp\mysql\data folder. But integrating it with the newly installed xampp had issues. So I located the C:\xampp\mysql\bin\my.ini file and directed innodb_data_home_dir = "C:/xampp/mysql/data" to my backed-up data folder and it worked flawlessly.

None of the above solution works for me. After pasting your old mysql/data directory to your new xampp, Check if ibdata1 has all the permissions required by the current user otherwise try to grant the permissions. Then "Empty Session Data" in your phpmyadmin, solved my problem.

If you are just moving your DB from one folder to another folder, but your InnoDB tables no longer work, because they can't be found and the error message "Table does not exist in the engine" is displayed, then these pair of SQL statements can be as quick as helpful:

copy from your old xampp xampp\mysql\data\ibdata1and

copy theNameOfdatabase from xampp\mysql\data\theNameOfdatabasethenThen paste to your xampp new xampp\mysql\data\ibdata1,and xampp\mysql\data\theNameOfdatabase

I downloaded XAMPP about a month ago and it was working just fine. Today I installed a voice recognition software and then restarted my computer. Ever since, MySQL won't start in my manager-osx application. It doesn't throw me an in the application log. This is what it says:

check the err log on your /Applications/XAMPP/xamppfiles/var/mysql/ with filename like your_machine_name.local.err, if you find something like: "Attempted to open a previously opened tablespace. Previous tablespace ... uses space ID"

I monitored the running processes by running top in one terminal window. Then I killed mysqld via sudo killall mysqld (screw the PID ;-) ) in another and restarted via sudo /Applications/XAMPP/xamppfiles/bin/mysql.server start.

There's been a lot of answer, but I think I found what is causing it, at least for me. It looks like if you put your computer to sleep (or it falls asleep on its own), when it reopens, it tries to open the the mysql process again. At one point I looked at my activity monitor and I had 5 instances running - killing all of them and then starting mysql works.

It can cause because of the software you installed or may be any other software which is using the same port 3306. This 3306 port is used by the Mysql in XAMPP. Similar kind of problem I faced for Apache. I was running skype and trying to run the XAMPP but the skype uses the same port as Apache so it was not working. Then I sign out from skype then the port was free and the apache started. So you should look for the software in you laptop which is blocking or making busy this port. Free that port by closing the software and then run XAMPP and It will work.

I encountered this problem just now. I checked log file and found it is caused by the server was not shutdown correctly. So I found this -to-recover-innodb-corruption-for-mysql/ and add a simple configuration "innodb_force_recovery = 1" in [mysqld] in my.cnf. Then the problem was solved.

All the answers stated above in relation to changing the port number are in this situation the best way to solve this problem since you need your voice recognition software to coexist with MAMP. However, you must remember that changing this port number is going to affect all you subsequent connections to MySQL (i.e, terminal,php code,phpmyadmin,etc). Hence It would be advisable to change the port on which the voice recognition software runs. Hope this was helpful.

This could be due to the fact that another instance of mysqd is already running in your mac-book-pro (MacOs-10). It's next to impossible to kill/pkill mysqld or ....I tried that route many times, with out any success. Finally the following worked for me :

It might be the possibility that your voice recognition software has a installer of mysql internally and when u installed this software, it has installed mysql too and added it to the service and this mysql service starts once your system starts. So now u r having two mysql servers (one from voice recognition software and second is from XAMPP) that's why killing the previous process (mysql service) solved your problem. But this is not a permanent solution, you have to repeat it every time when ever you start your machine. So better is to find out that mysql server (service) and change its port no. OR change settings so that mysql service should not start when your machine start (but might be your voice recognition software won't work properly)

You seem to have found a work-around by killing the process, but make sure you check for free space on your MySQL partition. If your logs or db files are consuming all your drive space, mysqld will not start.

Restarting the computer, or using the 'kill' commands listed above solve the problem. AS for preventing it from happening, I've found this occurring anytime my computer goes to sleep. The port is obviously kept reserved, and then on wake, mysql tries to reconnect to that port, but can't. This could be your problem also.

I am running XAMPP 5.6.3-0 for OS X Yosemite 10.10.2 and ran into the same issue twice, the first time was with Mavericks. With a bunch of different solutions to the issue with MySQL Database not starting using Manager App I wanted to confirm what had worked for me. The workaround that always worked and forced MySQL to start was by opening Terminal and using: sudo /Applications/XAMPP/xamppfiles/bin/mysql.server start I had the Manager App open and started ProFTPD and Apache and then ran the sudo command.

The other problem I had that seems to be another issue with many solutions is the problem after everything is started then entering localhost which brings me to the xampp splash screen and then nothing. The only thing that worked for me, to at the very least, to access the phpMyAdmin page is by entering localhost/phpmyadmin

If I move all the osTicket files to my xampp/htdocs folder and then try to access localhost/osTicket I get a message saying that I have to enable short_open_tag in my php.ini. But when I do I can't access the phpMyAdmin page as it says that it cant load some mysqli-addon and that I have to check my PHP configuration. And I can't finish the installation (I've tried and it won't work) which I guess is because I can't access the database now or something like that.

Unfortunately, I do not use Xampp. I am currently using Wamp server for test environment with OS: Windows XP SP3, and everything is fine here, even I enabled the short_open_tag in my php.ini file, I am able to run phpMyadmin.

I've downloaded and installed Wamp now, but when I try to start the program it complains several times that it can't find the file php_mbstring.dll. I've checked in the ext-folder and the file is in there so I'm not sure what the program is looking for.

However, the program seems to start anyway, I can reach the admin page by accessing localhost in my web browser. I've tried to put my osticket files in the www folder to, and I've enabled the short_open_tag in php.ini (from the wamp control panel) but when I try to enter the osticket install page it still says that I has to enable short_open_tag.

I'm trying to install Prestashop locally on my computer using Xampp on Mac (I've tried Mamp which wasn't working), I don't think I'm very far but I keep having a problem with the Prestashop wizard installer, see below, In bold are the issues to fix.

I should mention that I have already managed to fix some of them by changing the permission (get info, read&write etc), I have done it for all the errors, some have been fixed, some not. I would really appreciate if someone could suggest a way to fix this (I'm very new to this so any detailed explanation would be greatly appreciated).

3a8082e126