[Android Hsusb Driver Download Motorola
Luther Lazaro
Qualcomm is one of the best chipsets for mobile phones, and the majority of the phones are powered by Qualcomm chipset. If you own a Qualcomm phone and want to connect your phone to the computer, then you need a specific driver. And so here you get to download Qualcomm HS-USB QDLoader 9008 Driver or commonly known as Qualcomm USB Driver for Windows XP/7/8/10/11. This driver also lets you connect phones to the computer while in EDL Mode.
USB Drivers are very important if you want to transfer files or write ADB commands to your phone. Also, it is used in case you want to flash firmware. All OEMs have their own specific drivers like Samsung USB Driver, Nokia USB Driver, and more. But the Qualcomm USB Driver is a common driver for Android phones with Qualcomm processor. It lets you connect your Qualcomm device to the computer.
The Qualcomm HS-USB QDLoader 9008 is a driver for Windows computers, and it supports all Qualcomm powered phones. It allows users to connect their phones to the computer to transfer files and other purposes. Qualcomm USB Driver supports phones from Xiaomi, Samsung, Realme, OnePlus, LG, Motorola, Vivo, Oppo, and other company phones. It is also known as Qualcomm qhsusb_bulk driver and lets you connect your phone to the computer in EDL mode.
USB Driver acts as a bridge between two different devices, which helps in various functions, transferring files is a basic one. In some cases, it is mandatory to use a USB Driver; otherwise, one system or tool will fail to detect a device. The Qualcomm HS USB QDLoader 9008 Driver is mostly used while flashing Stock Firmware, installing Custom ROMs. We managed to get hands-on the latest Qualcomm USB Driver that you can download from the download section.
If you have a device that has a Qualcomm chipset, then you can download the latest Qualcomm USB Driver or Qualcomm qhsusb_bulk driver on your Windows PC. You can use the link below to download the Qualcomm USB Driver.
These are the popular brands that support Qualcomm USB Driver. There are many more Qualcomm powered phone brands that support the driver but are not on the list. So you can use the Qualcomm USB Driver in any case if you have a Qualcomm based phone. Before you head over to the installation process, read the requirements.
After adding the proper %SingleAdbInterface% and %CompositeAdbInterface% entries to the android_winusb.inf file, I now see "Android ADB Interface" in my Device Manager.However, running adb devices at the command-line does not show the device.
There is yet another subtle difference. In the winusb.inf file, for Slate 7 I have two %CompositeAdbInterface% entries defined but for Slate 21, there is just one %CompositeAdbInterface% entry defined.
Note that by following above steps, in most cases the USB-connection mode will be automatically set to MTP (Media Transfer Prorocol), but try setting that manually if it does not happen automatically.
While many of these solutions have worked for me in the past, they all failed me today on a Mac with a Samsung S7. After trying a few cables, someone suggested that the ADB connection requires an official Samsung cable to work. Indeed, when I used the Samsung cable, ADB worked just fine. I hope this helps someone else!
In Galaxy s6 - I resolved it by: Settings -> About device -> Software info -> Build number - tap it 7 times to enable Developer options. Go back to Settings -> Developer options -> turn on USB debugging.
I tried everything on this thread but nothing worked. My problem: my computer was charging the device when I was connecting the cable on, so I assumed the cable was working, but not. After I swap the cable, adb devices worked. The cable was the issue.
I also had same problem, i tried to use all the possible solution posted on this thread, but i found out i had same problem as JohnnyFun explained, but as per HenrikB solution i could not find any settings option in my Samsung Galaxy S6 phone ( Android 6.0.1)
Since it was working sometimes for me (ie at work) and not other times (ie at home), I decided to try out different cables and different Android phones I had. And sure enough, some of the cables did not work (adb can't see phone) with any of the phones, but they still charged the phone and Android recognized that it was plugged in.
So the methods mentioned above didn't work for me. What worked for me was googling Samsung Galaxy Tab USB driver and downloading and running the application that got my device recognized when I did adb devices. Since I was using a Samsung Galaxy, I used this link to download the usb driver from the OFFICIAL Samsung site. You would want to google your own respective android model usb driver
After downloading it, I ran the application to install my usb driver and then did adb devices. Make sure your Google USB driver from the Android SDK is downloaded and that your sdk is up to date as well. Also, make sure that your USB debugging mode is enable by going to Settings -> Developer Options -> then checking USB debugging. After all this, your device in the Device Manager should not have a yellow exclamation point next to it. When you run adb devices your device should show up. Hope this helps people. I literally spent hours trying to figure this out. Hopefully my answer could save you guys the hours I spent googling.
adb was not detecting connected nexus 5 device.Switched on the phone, enabled developer options, Enabled USB debugging mode, Now visible with adb. Also, USB configuration is still MTP. Hope this helps.
re-connect dongle with phone connected and click on "rescan devices", it will likely already identify the phone but say that it is waiting for user to authorise USB debugging (even if it is supposed to be on already)
For what it's worth, I had problems getting the ADB driver installed from my Windows7 machine. Turned out the Virusscan "access protection" prevented (only some) drivers to be installed properly. Unplugged USB, uninstalled the samsung device from device manager, disabled VS access protection, plugged usb back in and everything was OK. Wasted an hour, hopes it saves you one.
I am attempting to install an Android app on my brand new Nexus 10. I have a .apk file. I have downloaded the Android SDK, installed "Android SDK Tools", "Android SDK Platform-tools", and Google USB Driver. I have checked the setting on my Nexus 10 for "Unknown Sources".
When I run "adb devices" from the command terminal, it doesn't list any devices. I attempted to follow this recommendation, because it was identical to a suggestion I had previously found here on Stack Overflow. After following those steps, "adb devices" still returns an empty list and to make it worse, when I connect my Nexus 10 to my PC, Windows doesn't show any folders within the device.
I have undone the steps in that link, along with everything else I have done so far, as well as uninstalling my Nexus 10 from Device Manager and reinstalling it, but I am still not seeing any folders in the device.
Sometimes ADB loses connection to the device, and needs to be reset. If you have everything else working (ie USB driver installed, Developer settings enabled on the device), and still can't see your device, you need to reset the ADB process.
After downloading the Google drivers via Android SDK Manager (available via Eclipse, Intellij or Android Studio), I had to update the driver in Computer Management > Device Manager > Other Devices > ADB - right clicking and clicking on update driver and browsing for updated driver finally did the trick.
BTW, a total nightmare for me as well. I continue to be bewildered that setting up a dev environment should be the most difficult task imaginable, with each new inexplicable failure leading to another one. Jeesh! Good luck.
Edit: I recommend you DO NOT run ADB under VirtualBox if you are using a Windows Host. Somehow I got VirtualBox to lock the device drivers on the host, eventually making it so that the ADB wouldn't work on the client nor the host for any device I plugged in. To fix, I removed VirtualBox extensions on the host and ran _devices_view.html to delete the incorrect drivers. I could not get the correct drivers to load while VirtualBox extensions were installed, and this problem was a complete bastard to diagnose and fix.
For the Blu Studio 5.5s ADB drivers, you have to go through this hoop. I am certain it is the same with all Blu phones or maybe for all non-Google mfg phones, I am not sure. First of all if you connect the Blu device with USB cable and USB Debuggin off, you will see that Windows 7 loads a generic driver for you to copy on/off files to the phone and SD storage. This will appear when the USB cable is first plugged in and appears as a device icon under Control Panel, Device Manager, Portable Devices, BLU STUDIO 5.5 S (or the device you are working with). Do not bother getting the hardware ID yet - just observe that this happens (which indicates you are good so far and don't have a bad cable or something).
Go to the phone and switch on USB Debugging in the Developer section of your phone. Notice that an additional item appears as an undefined device now in the device manager list, it will have the yellow exclamation mark and it may have the same name of the phone listed as you saw under Portable Devices. Ignore this item for the moment. Now, without doing anything to the phone (it should be already in USB debug mode) go back to the Portable Devices in Device Manager and right-click the BLU STUDIO 5.5 S or whatever phone you are working with that is listed there without the exclamation mark (listed under Portable Devices). Right click on the icon under Portable Devices, in this example the name that appears is BLU STUDIO 5.5 S. On that icon select Properties, Details, and under the pull down, select Hardware IDs and copy down what you see.
Now do as the instructions say above, of course customizing the lines you add the the INF file with those relating to your own phone, not the Nexus 10. Here is what to customize; when you downloaded the SDK you should have a file structure expanded from the ZIP such as this:
795a8134c1