Download Zk Time Attendance Middle-east New-2.0.3 Build 6
Malvina Mago
25 YY.MM.DD, MM DD YY, MM/DD/YY, MM.DD.YY, DD MM YY, DD/MM/YY, DD.MM.YY, and YYYYMMDD. Keyboard voice: Whether any keyboard voice is generated; select Enable to enable the keyboard voice, or unselect to disable the keyboard voice. Volume: Adjust the voice volume. Finger Sensitivity: Sensitivity of fingerprint collection the default value Middle is recommended. When the reaction to finger pressing is insensitivity because of the dryness in the operating environment, you can set the finger sensitivity to High to raise the sensitivity of fingerprint collection. When the collected fingerprint image is unidentifiable because of the high humidity in the operating environment, you can set the finger sensitivity to Low. Enable voice: Whether the voice prompt function is enabled. If you select Enable, the device gives a voice prompt for your operations. FP version: Fingerprint algorithm version; the FP version can be 9.0 or The fingerprint templates in the two algorithm versions are not compatible with each other. Select an appropriate FP version. Here you can click the "write system" button to exchange the FP Alg version. AttLog alarm: When the remaining log capacity reaches the specified threshold, the device automatically gives the alarm information. The value range is 0 to indicates that no alarm is generated when the log capacity is exhausted. Repeat confirm time: If the attendance log of somebody is available in the specified time range (unit: minute), the log about the second passed attendance is not saved. (The value range is 0 to 60 minutes; 0 indicates that all passed logs are saved.) B. Data manage: 21
28 a) Take a picture: The device takes a picture but does not save the picture when checking the attendance of an employee. b) Not to take a picture: The device does not take a picture when checking the attendance of an employee. c) Take a picture and save: The device takes a picture and saves the picture when checking the attendance of an employee. d) Save the not pass picture: Take a picture and save the picture when an employee fails the attendance thrice consecutively. D. Other Setup: Click Other Setup to view the other settings of the device. Click Read Options and you can view the other settings. Timed Dormancy Time: When the dormancy period of the device reaches the specified threshold, the device enters a dormant state. You can press any key or touch the device by your finger to awaken the device. FP picture display: Whether the fingerprint picture is displayed on the screen at the time of registration or comparison. The parameter has four options: Register and contrast display, Register display, Contrast display, and Register, Contrast not 24
29 display. Lock the power off key: To prevent malicious power off, you can choose whether to lock the power off key. If you do not select Enable, the device is powered off three seconds after pressing the power off key. If you select Enable, the power off key does not work. Note: Only the device with the power off key provides the Lock the power off key option. f. Click Date Time Setup to view the date and time of the device. Click Read Options, and then you can view the date and time of the device. To ensure the accuracy of the recorded attendance status, you must set the time and date of the device correctly. You can select either Setup as current setup or Setup as computer date time. Setup as current setup: Enter the detailed time (YY/MM/DD/MM/SS) on the date bar, and the click Setup as current setup to upload the device to the device. 25
31 Download Attendance logs from Device: Download all records which have pass verification from the Device; Download user info and FP from Device: Download employee information, the employee's fingerprint can be download at same time Upload user info and FP to Device: Upload the employee's information and fingerprint together at same time. 1. Download attendance log from Device: It is unable to download data from the Device unless the system and the Device are at the connection condition. Directly click on "Machine" in the main interface left side to download data record from the Device or enter Device management menu, chooses Download attendance logs. The system could prompt "Reading data ", by now please wait for moment, after the completion of data downloaded, the prompts will appear in the right side of table below, informing you that the to download data was successfully, the communication between the Device and the software already has disconnected. The downloaded data should be added to the system, if data is too bigger, it is possible 27
32 need to take much more time. The downloading record can completely display in the circle record region like as above figure. At the same time, the new data record will be stored in the employee's record data list in the system, you will be allowed to view it from the attendance record; the new user will be stored in the employee information table of the system, it is allowed to view through the employee's maintenance. After downloading data, the system still cannot automatically clear data which is stored up in Device. Under this option > Maintenance/Options > System Options > Download Record(s), you choose item as that Delete Logs in Device after downloading; system can automatically remove data record from Device. Note: If the machine model is F8 please note! maybe the F8 machine does not need to enroll the user first directly through slip the card to verify user identity, therefore the corresponding user information does not possibly along with downloading recorded data, after the downloading, the software can prompt whether add these user who hasn't been registered but still has the recorded data to the database. 2. Download the user information from the Device: Only when the system and the Device are at the connection condition, the downloading data is available, directly click on "Machine" the main interface left side, the column to Download user info and Fp, or access Device management menu, choose Download user info and FP. View user on the Device: Click on "Browse Users in Device" button. For new users, it will display in the "New User" column. Meanwhile, it will suggest new users added to the system database. Download: When the data has to directly download, click the button to download. 28
USING THE MODEL IQ 1000 INTELLICLOCK The IQ 1000 is an advanced model of time clock with many features and benefits designed to offer you a wide range of options in how you collect your time and attendance
dca57bae1f