Fwd:

[sandeep deshpande]

---------- Forwarded message ----------
From: Anshej Habin <habina...@gmail.com>
Date: Sun, Jan 26, 2014 at 3:55 PM
Subject:
To: "sandeepdeshpande.92" <sandeepde...@gmail.com>


gearbox leakage
exhaust and  muffler can be given a thought
coarse clip or clamp for gearbox
adjust idling so that kill switch kill the engine spontaneously
rubber mat for downside(battery mounting) and wooden piece on top
otherwise because of vibration'electrolyte can come down
attach battery warranty card,mfg,serial number
kill switch letter-chenge the kill switch if possible
oem seal and attach in the bill
reverse alarm rating-certification needed
mention in design report-handbrake as revers-highlight it
not happy with the hitch plate arrangement
change of hitch plates if possible.
30th is the last date
mention the college name in the id cone
mention number int he front view also
on th bumber-make it proper-no sharp edges
rear back plate-excess to be cut
transponder conversion and other detailas and gmail conversion to be attached
leg from sim -rule
attach material report in the mail
cushion to be firn=mly held in the seat
bending strength certificate
firewall open areas are there-bolt it properly
seat belt should be more tight
change seat belt]
pratise by driver=3-4 seconds
check engine oil and gearbox oil properly
bolt of safety belt
2 threads out
poor barke at rear
brake hoses rubbing should be take care
spill prevention hitting and exhaust
fuel tank/extended-rating
driver clothing bill

--

Sandeep Deshpande
Final Year, 

Mechanical Engineering,
NITK Surathkal.
India.