[Super DVdate FULL Version Downlo
Hanne Rylaarsdam
Super DVdate is a free trial software published in the Video Tools list of programs, part of Audio & Multimedia.
This Video Tools program is available in English. It was last updated on 22 April, 2024. Super DVdate is compatible with the following operating systems: Windows.
The company that develops Super DVdate is Dobest Software Studio. The latest version released by its developer is 8.70. This version was rated by 3 users of our site and has an average rating of 4.3.
The download we have available for Super DVdate has a file size of 10.49 MB. Just click the green Download button above to start the downloading process. The program is listed on our website since 2012-07-28 and was downloaded 462 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded software with your antivirus. Your antivirus may detect the Super DVdate as malware if the download link is broken.
How to install Super DVdate on your Windows device:
- Click on the Download button on our website. This will start the download from the website of the developer.
- Once the Super DVdate is downloaded click on it to start the setup process (assuming you are on a desktop computer).
- When the installation is finished you should be able to see and run the program.
Contact the developer of the application using the Contact information posted below. I have checked the official website, and the software can be installed on following versions of Windows: XP, Vista, NT, and Windows 7. There is no Mac version available on the download page at the moment.
It's for surveillance video. The date and time stamp on digital video is embedded on a metadata file and for some reason all of the video capture software out there, especially on the Mac platform, will not display the date and time when imported digitally. Typically we have to export it analog with the data code on so that the DTS stamp is displayed and then re-digitize the film.
I've worked with some surveillance systems, they are VERY propriatary and typically record in non-common highly compressed - low resolution video formats. The cameras used by such systems are very basic cameras that don't have any option settings on the camera itself. The surveillance DVR / system is responsible for date/time information.
Are you extracting the video using the system? If you are, then you should be able to set the software to put the time stamp on the video when extracting if it's not already the default setting. The important thing I learned when working with surveillance systems is RTFM (Read The Freaking Manual).
If you are just copying the video files without using the system AND are somehow able to read or convert them to import into FCPX, then you will likely have to put the time stamp on it yourself. There was a discussion on these forums a while back on how this can be achieved but it's non-trivial.
MShoup, I am also a Private Investigator. I use a Panasonic Camcorder. When I have finished a job I download the video from my camera on to my PC (I don't have a Mac). Then I run it through a program called VATS (Visual AVCHD Time Stamp). It then stamps all of my video clips with the date and time stamp. I love it!! Then I have to take the sound off using another program and then a video converter program to reduce the size of the file!!
I recently purchased my first iPad and have used it VERY successfully covertly. It paid for itself first job out the door. I am looking for a date and time stamp program for that as my clients want that ability.
Thanks for the reply. I am aware of that program but hate using windows Im looking for something exactly like that for the Mac. For covert video you should checkout the LawMate HD Keychain; it's invaluable. Ive used my iPad for door contacts too to get ID video. Fun stuff. Also check out imtoo video converter, don't know if there is a windows version but you car remove audio and convert to any video format in one step Maybe this discussion will get me on the right track if something like that app exists for the Mac. Muchos Gracias Amigo. Mark
Hello, I know this post is a little old but I am running into the same problem right now. I work for an investigation agency as both an investigator and help with editing as well. We recently switched from digital tapes to strictly digital cameras with built in hard drives and SD cards. We use to do a real time playback from the camera to capture the video to the computer for editing. We were hoping that with the new cameras we could save time by just having digital fiels that we could drag a drop. But when we import the digital files the timestamp is gone. We did find that if you import the files into iMove from the camera directly you can apply the date/time title and it shows up correctly. We could then export the file and import it into Final Cut Pro X and the stamp is still there. We tried installing a title generator on FInal Cut but all that would do is show the current time. I hope using the iMovie thing might help you out but we would like to cut that step out and just drag a file from the camera to the computer hard drive and when imported to Final Cut have the timestamp display. If you have found a solution to the problem since then please reply with your solution so we can use it too.
I recently equipped my field investigators with hi def camcorders (Panasonic since they have PREC) and have been using iMovie and iDVD since the first of the year. Keep in mind that iMovie looks at your video as if it is GMT (or GMT +1 during DST) so you must set up your "home time zone" on your camera accordingly so that it not only records the actual time/date (for court) and so iMovie processes it properly without having to use the "adjust clip date and time" command (not good when subject to a cross exam on the stand).
New versions of the 3 plug-in for Dazzle DVC170, Dazzle DVC130 and ADS DVD Xpress DX2 have been published on Sunday, September 23, 2007. If you had issues with a previous one, try to download the new version and just replace the old plug-in xxx.pcf file with the new one:
Launch CaptureFlux with a double-click on its icon. The program will look for all capture devices connected to your system, and find all video and audio sources delivered by them, assuming the devices are compatible with the directshow architecture of DirectX. So CaptureFlux is only useful if at least one video or audio device is connected. Among these devices, you may find DV camcorders connected to a firewire link, usb webcams or analogic video acquisition cards, for instance a DC30+ card with the XP driver from Maik works well. A sound card, even integrated in the motherboard, can also give an audio source. By default, mpeg devices are not processed by CaptureFlux. But there may exist plug-ins that can make them work with CaptureFlux. Presently, the following usb boxes have plug-ins for the version 5.2.x of CaptureFlux, that you may download by clicking on their name:
When you have launched CaptureFlux, with capture devices connected to your system,you will get the main window showing the preview of a connected video and audio stream. Click on an area on the picture to go to the relevant paragraph.
If you have connected a video source before launching CaptureFlux, you should see the video displayed in real time on the video window included in the main form and eventually hear the audio source. If you have several sources connected, you should first check if the current active sources are the good ones. Go to the sources panel (F2) .A list of all available video sources is given in the combobox (1) where you may change the selected one, if necessary.
Generally, you will choose the Line In entry, when you want to capture an audio from a TV or an external device connected to your sound card. But you may also choose the CD drive or the microphone if you have one connected to that entry. If you choose the mixer, you will have to mute (CTRL+M) the sound in order to avoid Larsen effect. And you will record all the little sounds and jingles from your computer when you make an error or shut down a window. So avoid this entry, except for specific purposes.
I've been looking over the specs of the vegas products and have even watched some of the tutorial videos, but I am having a hard time determining if any of the products offers a feature that I am looking for in a video editing program.
In Windows Movie Maker, an older version, it has a feature that allows you to clip the video into smaller portions on import. When looking around for a video editing program more "advanced" (but not too advanced). I came across Filmora. It has an auto scene detection feature, but it loads the clips into the timeline. Not into the Media Library for me to choose and pick what scenes I want and what order I want the scenes to show up in.
So what I'm wondering is, does Vegas products offer such a feature where I can auto clip my videos into smaller segments and have those segments available in the Media Library to drop into the timeline. As well as keep those clips for possible later videos to change up the order and such if I need to. Like what Windows Movie Maker used to have.
Please tell us how your video has been recorded, to tape or digital media and in which format. maybe you can also tell us the camera model. Also keep in mind that any kind of "scene detection" is only possible if you physically pressed the start/stop button on your camera during recording.