[Ninux-Wireless] problemino con chilli

[Michele Salerno]

Ciao raga,

ho un problemino con CoovaChilli... mi fa il login ma non mi da accesso a internet...
Cosa può essere? queste sotto sono le mie config.

config chilli 'chilli1'
    option acctupdate '1'
    option defbandwidthmaxdown '2000000'
    option defbandwidthmaxup '2000000'
    option defidletimeout '300'
    option defsessiontimeout '10800'
    option dns1 '8.8.8.8'
    option dns2 '8.8.4.4'
    option dnsparanoia '1'
    option ipdown '/etc/chilli/down.sh'
    option ipup '/etc/chilli/up.sh'
    option radiusserver1 'controller.nnxx.ninux.org'
    option redir '1'
    option tundev 'tun0'
    option uamhomepage 'https://wifi.nnxx.ninux.org'
    option uamserver 'https://wifi.nnxx.ninux.org'
    option dhcpif 'br-hotspot'
    option radiusserver2 'controller.nnxx.ninux.org'
    option uamallowed 'wifi.nnxx.ninux.org,192.168.182.1'

config interface 'hotspot'
    option dns '86.107.110.93 8.8.8.8 8.8.4.4'
    option dns_search 'basilicata.nnxx'
    option ifname 'captive-wlan'
    option ipaddr '192.168.50.1'
    option netmask '255.255.255.0'
    option proto 'static'
    option type 'bridge'

config interface 'captive_wlan'
    option ifname 'captive-wlan'
    option proto 'none'

config wifi-iface 'wifi_captive_wlan'
    option device 'radio0'
    option ifname 'captive-wlan'
    option isolate '1'
    option mode 'ap'
    option network 'hotspot'
    option ssid 'ninux.org-hotspot'
    option wds '0'
    option encryption 'none'

root@salotto:~ # route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface

0.0.0.0         192.168.1.1     0.0.0.0         UG    0      0        0 eth0.2
10.27.10.0      10.27.253.27    255.255.255.0   UG    50     0        0 vpnbas
10.27.22.0      10.27.253.17    255.255.255.0   UG    50     0        0 vpnbas
10.27.25.0      0.0.0.0         255.255.255.0   U     0      0        0 br-lan
10.27.253.0     0.0.0.0         255.255.255.0   U     0      0        0 vpnbas
192.168.1.0     0.0.0.0         255.255.255.0   U     0      0        0 eth0.2
192.168.50.0    0.0.0.0         255.255.255.0   U     0      0        0 br-hotspot
192.168.182.0   0.0.0.0         255.255.255.0   U     0      0        0 tun0

root@salotto:~ # iptables -L -v |grep tun0
    0     0 ACCEPT     icmp --  tun0   any     anywhere             192.168.182.1       
    0     0 ACCEPT     udp  --  tun0   any     anywhere             192.168.182.1        udp dpt:domain
    0     0 ACCEPT     udp  --  tun0   any     anywhere             192.168.182.1        udp dpts:bootps:bootpc
    0     0 ACCEPT     udp  --  tun0   any     anywhere             255.255.255.255      udp dpts:bootps:bootpc
    0     0 ACCEPT     tcp  --  tun0   any     anywhere             192.168.182.1        tcp dpt:3991
   15  1773 ACCEPT     tcp  --  tun0   any     anywhere             192.168.182.1        tcp dpt:3990
    0     0 DROP       all  --  tun0   any     anywhere             192.168.182.1       
   85 10239 ACCEPT     all  --  tun0   eth0.2  anywhere             anywhere            
    0     0 DROP       all  --  tun0   !eth0.2  anywhere             anywhere            
  116 18734 ACCEPT     all  --  any    tun0    anywhere             anywhere            
    0     0 ACCEPT     all  --  tun0   any     anywhere             anywhere            

il file /etc/chilli/ipup.sh è:

if [ "$(iptables -L -v -n --line-numbers -t nat | grep MASQUERADE | grep -c $HS_WANIF)" -eq "0" ]; then
  iptables -I POSTROUTING -t nat -o $HS_WANIF -j MASQUERADE
fi