Prepare Windows 10 Bootable Usb
Kat Guinnip
You can create a bootable USB flash drive to use to deploy Windows Server Essentials. The first step is to prepare the USB flash drive by using DiskPart, which is a command-line utility. For information about DiskPart, see DiskPart Command-Line Options.
In the new command line window that opens, to determine the USB flash drive number or drive letter, at the command prompt, type list disk, and then click ENTER. The list disk command displays all the disks on the computer. Note the drive number or drive letter of the USB flash drive.
If your server platform supports Unified Extensible Firmware Interface (UEFI), you should format the USB flash drive as FAT32 rather than as NTFS. To format the partition as FAT32, type format fs=fat32 quick, and then click ENTER.
So my PC crashed a couple days ago and I need to run a clean install of windows 10 from a bootable USB. The only other computer I have to work with is a Chrome OS, and I can't seem to find clear instructions on how to create a bootable USB from Chrome OS. Most of my search results are pulling up how to create a bootable USB to use within the Chromebook itself, whereas I want it to be used on a PC. Any ideas on how to do this?
Download the ISO file for Windows 10 from the Microsoft website here. Add the Chrome extension "Chromebook Recovery Utility." (Click here) Rename the downloaded file from filename.iso to filename.bin(The file name is usually called "Win10_22H2_English_x64v1.iso"). Launch Chromebook Recovery Utility and click the settings button in the top right corner, select "Use local image". Select the filename.bin that you downloaded and renamed. Insert and select the USB drive you are putting the iso on, wait for it to load, your done!
If your PC has the capacity to connect two USB devices, and you dohave two large-enough USB disks, then use one disk for booting anoperating system that can create on the other diskthe required Windows installation from the ISO.
I'm looking to create a Windows 11 bootable USB from my Mac but am unsure of the best approach to take. My main goal is to have a USB drive prepared so I can install Windows 11 on a different PC. I'm aware that there are several tools and processes for creating bootable USBs for Windows, but I'm not clear on which methods are compatible with macOS, especially with the latest updates and security features of macOS that might affect the process. If anyone has experience with this or can offer a step-by-step guide that is confirmed to work with the current versions of macOS and Windows 11, I would greatly appreciate the assistance.
Following the steps was a breeze. I selected my Windows 11 ISO file, plugged in my USB drive, and chose it as the destination. The moment of truth came when I clicked the "BURN" button. I was pleasantly surprised to see the process begin without any hiccups. It was reassuring to see the progress bar filling up, indicating everything was moving along as expected.
The entire process took about 5 minutes, just as the application mentioned. During this time, I made sure not to unplug the USB, curious and a bit anxious to see if it would indeed be bootable once done. Once the progress bar hit 100% and the application notified me that the process was complete, I ejected the USB drive and headed over to my new PC to test it out.
Booting up the new PC with the USB plugged in was the moment of truth. To my delight, the Windows 11 installation screen appeared without any issues, proving that the WonderISO tool had worked perfectly. It recognized the USB as bootable media, and from there, installing Windows 11 was as straightforward as it gets.
Step 1: Download the Windows 11 ISO Visit the official Microsoft Windows 11 download page and download the Windows 11 ISO file. Choose the edition you need and follow the prompts to download the ISO.
Connect your USB drive to your Mac. Open Disk Utility (found in Applications > Utilities). Select your USB drive from the sidebar, click "Erase," and format it as MS-DOS (FAT) with a Master Boot Record (MBR) scheme. This will make it compatible with Windows installation.
Since Boot Camp Assistant doesn't support creating Windows 11 bootable USB drives, download a third-party utility like Syscute WinBootMate. These tools are capable of creating a bootable Windows USB on macOS.
Step 4: Create the Bootable USB Launch the third-party tool you downloaded in Step 3. Select the Windows 11 ISO file you downloaded earlier and choose your USB drive as the destination. Follow the on-screen instructions to create the bootable drive. This process will take some time, depending on the speed of your USB drive and Mac.
Your Windows 11 bootable USB drive is now ready. You can use it to install Windows 11 on a compatible PC by inserting the USB drive, rebooting the PC, and booting from the USB drive. Make sure to change the boot order in the BIOS/UEFI settings if necessary.
installing WinUSB on EFI loaded Ubuntu will uninstall the grub-efi packages in order to install the grub-pc packages. It will make your system unbootable if you don't manually reinstall grub-efi package before rebooting.
After installation, write the windows ISO to your storage device with the following command. In the command below replace the X in /dev/sdX with your usb device path (see above how to find it).
Some third-party installers feature Windows installation images (/sources/install.wim) greater than 4GB making FAT32 as target filesystem impossible. NTFS filesystem support has been added to WoeUSB 3.0.0 and later.
Now look for gparted in the Dash or type gparted in the terminal. Select your USB stick from the right dropdown list. In my case it's /dev/sdg, yours may be different. Remove all partitions and create a single big FAT32 partition with Gparted.
Once that is done, unplug and plug your USB stick so it gets mounted (you can also mount it from the same GParted), now execute Unetbootin, again, you can look in the dash or typing in the terminal. Select that you want to use an iso, look for the path your ISO is.
Mark the checkbox to see all devices, here you have to select the very same device you selected in Gparted, otherwise your data can be lost. Select continue. Wait for a moment and done. Restart your pc and select to boot from the USB.
This method will work also with [new] versions of Windows 10, where there is a file, install.wim, with a size > 4 GiB, so that the FAT32 file system cannot manage it, when extracted from the iso file. In this case there will be a small FAT32 partition and a bigger NTFS partition. It is tested with an early version of Windows 11, and works there too.
It was difficult to find a linux tool that can create boot drives (USB sticks, memory cards ...) with Windows, so I added this feature to mkusb-nox and later on created mkusb version 12 with this feature. It works in all current versions of Ubuntu (and Ubuntu flavours: Kubuntu, Lubuntu ... Xubuntu) and with Debian 8-10. The created boot drive can boot 64-bit Windows in both UEFI and BIOS mode.
The advantage of this method is that it depends only on Microsoft's tool, which does the configuration for you. The latest Windows images contain a file above FAT32's size limit, which makes it a pain to create a bootable USB drive by hand. My WoeUSB-created drive wasn't recognized by my Dell XPS's UEFI.
WinUSB comes with a simple GUI with minimal options to go with, here is how to use WinUSB to make bootable Windows USB from Ubuntu. You can use any Windows ISO may be for XP, Windows 7, Windows 8, Windows 8.1 or any other.
This mode is made for custom installation disks with install.wim file greater than 4 GiB, which could be found on various torrent trackers. Windows2usb creates 2 partitions in this mode, small 1 MiB FAT32 partition with uefi-ntfs and huge NTFS partition with ISO data.
The easiest way that I know is using Ventoy.
You can get Ventoy in this web site
You just need to install Ventoy to the USB stick and Ventoy allows you to drag and drop the image files that you want to add to the USB stick and it creates a grub like menu that allows you to choose the system you want to boot from your USB stick. It can be done with many different operating systems, including Windows and Linux distributions.
In addition to being easy, Ventoy is very practical. You can find the instructions on how to use it on the website.
For the sake of completeness, let me add instructions on how to create a bootable USB-disk from ThinkPad's UEFI/BIOS update ISOs. None of the above answers worked for me. (Perhaps there are similar problems with other vendors.)
Update for 2023 using Ubuntu 22.04LTS desktop and creating a Windows 10 installation bootable USB; I doubt very much the 17 other answers missed this, so I think it must be much easier in 22.04 than it was in previous Ubuntu versions. Please note that this approach requires that your system (Bios) can boot into a NTFS formatted drive. If that's not the case, look at the other answers below. You may be able to find out if your hardware can boot into NTFS by looking at its documentation. Older hardware will likely not be able to boot into NTFS, and even some newer ones as the comments show.
d3342ee215