Re: [NI4CE-NXDN] Digest for ni4ce-nxdn-users@googlegroups.com - 2 updates in 1 topic

[YV5ADM Arnaldo Aguilar]

Good morning, 

Today I will review those details you indicate. 

Thank you 

Arnaldo Aguilar 

YV5ADM 

El jue, 20 de feb de 2025, 01:20, <ni4ce-nx...@googlegroups.com> escribió:

ni4ce-nx...@googlegroups.com

Google Groups

Topic digest
View all topics

• HELP WITH FR6000 AND UC-FR5000 CONFIGURATION - 2 Updates

HELP WITH FR6000 AND UC-FR5000 CONFIGURATION

Arnaldo Aguilar (YV5ADM) <yy5...@gmail.com>: Feb 19 03:13PM -0800 Good evening dear colleagues,   After greeting you and wishing you the best, I would like to request your help with some documentation or video that can guide me in the configuration of two FR6000s with their UC-FR5000 cards.   The IP and recognition configuration on the laptop of each repeater on the laptop is correct but I cannot achieve modulation between them.   I appreciate any help you can give or guide me.     Arnaldo Aguilar YV5ADM

Paul Toth-NB9X <pto...@tampabay.rr.com>: Feb 19 07:19PM -0500 Arnaldo…..     If you are trying to LINK these two repeaters via IP (using the UCFR5000), you must place the IP address of the other repeater in the MultiSite Settings à Multi-Site Operations page Direct IP Address List. You must also ENABLE Multi-Site Operations at the top of that page. Finally, each repeater must be able to use Port 41300 UDP on your network. That means your network must be outside any firewall your carrier has put in place. You may need to enable Port Forwarding for UDP Port 41300 and TCP Port 41000 through any routers that will front end your repeaters.     Using this Peer-to-Peer networking, all Talkgroups will be passed on both repeaters. If you are looking for better granularity, you will need to look at FlxNet (formerly known as NXCore). FlxNet allows your repeaters to handle traffic separately or in a unifie manner based on the Talkgroup being used. Contact Tom Chance-K9XV for more information on FlxNet.     73 de Paul-NB9X             From: ni4ce-nx...@googlegroups.com <ni4ce-nx...@googlegroups.com> On Behalf Of Arnaldo Aguilar (YV5ADM) Sent: Wednesday, February 19, 2025 6:13 PM To: NI4CE NXDN Users <ni4ce-nx...@googlegroups.com> Subject: [NI4CE-NXDN] HELP WITH FR6000 AND UC-FR5000 CONFIGURATION     Good evening dear colleagues,   After greeting you and wishing you the best, I would like to request your help with some documentation or video that can guide me in the configuration of two FR6000s with their UC-FR5000 cards.   The IP and recognition configuration on the laptop of each repeater on the laptop is correct but I cannot achieve modulation between them.   I appreciate any help you can give or guide me.     Arnaldo Aguilar YV5ADM   -- Check-in to the TampaBay Area NXDN Net every Wednesday evening at 7:30 PM (Eastern) on TG1200! --- You received this message because you are subscribed to the Google Groups "NI4CE NXDN Users" group. To unsubscribe from this group and stop receiving emails from it, send an email to ni4ce-nxdn-use...@googlegroups.com <mailto:ni4ce-nxdn-users+unsubscribe@googlegroups.com> . To view this discussion visit https://groups.google.com/d/msgid/ni4ce-nxdn-users/2f5975b7-2316-427a-b6ce-726c86afc5d4n%40googlegroups.com <https://groups.google.com/d/msgid/ni4ce-nxdn-users/2f5975b7-2316-427a-b6ce-726c86afc5d4n%40googlegroups.com?utm_medium=email&utm_source=footer> .

Back to top

You received this digest because you're subscribed to updates for this group. You can change your settings on the group membership page. To unsubscribe from this group and stop receiving emails from it send an email to ni4ce-nxdn-use...@googlegroups.com.