HELP WITH FR6000 AND UC-FR5000 CONFIGURATION
Arnaldo Aguilar (YV5ADM)
After greeting you and wishing you the best, I would like to request your help with some documentation or video that can guide me in the configuration of two FR6000s with their UC-FR5000 cards.
The IP and recognition configuration on the laptop of each repeater on the laptop is correct but I cannot achieve modulation between them.
I appreciate any help you can give or guide me.
Arnaldo Aguilar
YV5ADM
Paul Toth-NB9X
Arnaldo…..
If you are trying to LINK these two repeaters via IP (using the UCFR5000), you must place the IP address of the other repeater in the MultiSite Settings à Multi-Site Operations page Direct IP Address List. You must also ENABLE Multi-Site Operations at the top of that page. Finally, each repeater must be able to use Port 41300 UDP on your network. That means your network must be outside any firewall your carrier has put in place. You may need to enable Port Forwarding for UDP Port 41300 and TCP Port 41000 through any routers that will front end your repeaters.
Using this Peer-to-Peer networking, all Talkgroups will be passed on both repeaters. If you are looking for better granularity, you will need to look at FlxNet (formerly known as NXCore). FlxNet allows your repeaters to handle traffic separately or in a unifie manner based on the Talkgroup being used. Contact Tom Chance-K9XV for more information on FlxNet.
73 de Paul-NB9X
--
Check-in to the TampaBay Area NXDN Net every Wednesday evening at 7:30 PM (Eastern) on TG1200!
---
You received this message because you are subscribed to the Google Groups "NI4CE NXDN Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to ni4ce-nxdn-use...@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/ni4ce-nxdn-users/2f5975b7-2316-427a-b6ce-726c86afc5d4n%40googlegroups.com.