Sat April 20 Workday?

[Stephen Kosacz]

PSA Laser lads and lassies-
You can get your income taxes done this weekend and reward your
success (in filing an extension?) by getting the Jannie Marie (PSA's
latest addition to their fleet of support boats) ready for serving the
2013 Laser Season on the following Saturday.

I propose that we once again convene at Autoworks on Saturday April
20th at 9:00 (Rain or Shine - thanks to the luxury of indoor space) to
install the new/used lower drive on the motor, clean her up, replace
filters & spark plugs, and prep the bottom for painting

The following Saturday April 27th, we could paint the bottom in the
morning and launch her on high tide at 1:00 PM

Between now and Saturday the 20th, Matt Williams will be helping me
replace the water pump, installing the seals, and filling the gearbox
with lube.

[Stephen Pollak]

Hi Stephen,

I am unlikely to make it due to work obligations.

But I will try ...

- Steve

[Stephen]

Eric cutting can't make it either. If we don't have enough people it won't get done on that day. Not going to worry about it

> --
> --
> You received this message because you are subscribed to the Google
> Groups "NH Seacoast Laser" group.
> To post to this group, send email to nh-seaco...@googlegroups.com
> To unsubscribe from this group, send email to
> nh-seacoast-la...@googlegroups.com
> For more options, visit this group at
> http://groups.google.com/group/nh-seacoast-laser?hl=en?hl=en
> our website: https://sites.google.com/site/nhlasers/home
>
> ---
> You received this message because you are subscribed to the Google Groups "NH Seacoast Laser" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to nh-seacoast-la...@googlegroups.com.
> For more options, visit https://groups.google.com/groups/opt_out.
>
>

[Lucie Cook]

I could come early next week, but this weekend is not possible for me either. 

Lucie

Lucie Cook

Lu...@gracemi.org

I GoodSearch for Grace Ministries International
Raise money for your favorite  school just by searching the Internet or shopping online with GoodSearch - 

www.goodsearch.com - poweredby Yahoo! 

[Eric Cutting]

I will make the 27th.

Eric

From: Stephen <stephen...@gmail.com>
To: "nh-seaco...@googlegroups.com" <nh-seaco...@googlegroups.com>
Sent: Thursday, April 11, 2013 6:14 PM
Subject: Re: {NH-Seacoast-Laser:% Sat April 20 Workday?

Eric cutting can't make it either. If we don't have enough people it won't get done on that day. Not going to worry about it

On Apr 11, 2013, at 2:38 PM, Stephen Pollak <spo...@mac.com> wrote:

> Hi Stephen,
>
> I am unlikely to make it due to work obligations.
>
> But I will try ...
>
> - Steve
>
>
> On Apr 11, 2013, at 2:36 PM, Stephen Kosacz <stephen...@gmail.com> wrote:
>
>> PSA Laser lads and lassies-
>> You can get your income taxes done this weekend and reward your
>> success (in filing an extension?) by getting the Jannie Marie (PSA's
>> latest addition to their fleet of support boats) ready for serving the
>> 2013 Laser Season on the following Saturday.
>
> --
> --
> You received this message because you are subscribed to the Google
> Groups "NH Seacoast Laser" group.
> To post to this group, send email to nh-seaco...@googlegroups.com
> To unsubscribe from this group, send email to

> nh-seacoast-laser+unsub...@googlegroups.com

> For more options, visit this group at
> http://groups.google.com/group/nh-seacoast-laser?hl=en?hl=en
> our website: https://sites.google.com/site/nhlasers/home
>
> ---
> You received this message because you are subscribed to the Google Groups "NH Seacoast Laser" group.

> To unsubscribe from this group and stop receiving emails from it, send an email to nh-seacoast-laser+unsub...@googlegroups.com.

> For more options, visit https://groups.google.com/groups/opt_out.
>
>

--
--
You received this message because you are subscribed to the Google
Groups "NH Seacoast Laser" group.
To post to this group, send email to nh-seaco...@googlegroups.com
To unsubscribe from this group, send email to

nh-seacoast-laser+unsub...@googlegroups.com

For more options, visit this group at
http://groups.google.com/group/nh-seacoast-laser?hl=en?hl=en
our website: https://sites.google.com/site/nhlasers/home

---
You received this message because you are subscribed to the Google Groups "NH Seacoast Laser" group.

To unsubscribe from this group and stop receiving emails from it, send an email to nh-seacoast-laser+unsub...@googlegroups.com.

[stephen kosacz]

can anyone make it on the 20th?  

can anyone besides Eric make it on the 27th?

nh-seacoast-la...@googlegroups.com

For more options, visit this group at
http://groups.google.com/group/nh-seacoast-laser?hl=en?hl=en
our website: https://sites.google.com/site/nhlasers/home
 
---
You received this message because you are subscribed to the Google Groups "NH Seacoast Laser" group.

To unsubscribe from this group and stop receiving emails from it, send an email to nh-seacoast-la...@googlegroups.com.

For more options, visit https://groups.google.com/groups/opt_out.
 
 

--
Stephen Kosacz
President
Autoworks, Inc.
107 Government St
Kittery, ME 03904-1645
207.439.4500
www.auto-works.com

[John Miller]

I am working every Saturday prepping my 50 year old sailboat for this
season. Be available for three hours on the 20th. If you are installing the
impellor on the water pump, be extra sure it is installed in the right
direction (it's easy to get it wrong....I know).
John

[Ken Jennings]

I'm coaching UNH sailing this weekend...the 27th works for me better!

[nathaniel h]

Ill be there, It'll be nice to see you guys again after the winter 

Nathaniel

Sent from my iPhone

[Stephen]

We do not yet have the motor assembled; if some people want to come over this Saturday afternoon to prep the boat there is a bottom that needs to be scraped down and tge tarp removed, hull cleaned but not much more that could be done.

 Otherwise, it seems like more people are available the following Saturday by which time perhaps the lower unit water pump and seals will have been replaced.

[Lucie Cook]

I will still be in CA or somewhere in the Pacific heading to the Seattle area on the 27th. But if I get back in time I'll try to make it. 
If anyone is interested, I will be on the Sonamara and can be tracked on: 
http://www.marinetraffic.com/ais/in the San Francisco Bay area now and I think we should be heading north on Tues. 
Lucie Cook

Sent from my iPhone

[stephen kosacz]

Matt Williams and I will be working on the used lower drive on the outboard this Saturday at 1:30. (replace water pump, change lube and seals, if possible install on motor)

If others are able to and want to come by to unwrap the Jannie Marie, scrape the bottom, tidy things up, install the batteries, tape off & mark the new water line (that motor has always caused the stern to sit low in the water), it will be that much closer to being ready to launch.

It might well be that after Matt and I get the water pump installed, we could install the lower unit to the motor, test, and be ready to rock!!

Rye Harbor Tide info:

this Sat 4/20  LOW - 1:20 PM (someone or 2 people could come by Autoworks, pick up the Aluminum Skiff and oars, put the mooring ball and tackle on the mooring chain)

next SAT 4/27 HIGH 12:53 AM (depending on what was done in terms of painting the bottom and completion of boat prep on Saturday morning, a crew could launch her!)

Sat, May 4th:  High  7:12A,, Low 12:55A, High 7:52 P

It's your fleet, it's your call......

Stephen Kosacz